Pipe and Piping

Pressure Piping Systems include 10 and 12 in. pipe sizes.
Pipe and Piping

Pressure Piping Systems include 10 and 12 in. pipe sizes.

Available in 20 ft lengths, Schedule 80 PVC and CPVC Piping Systems feature chemical and corrosion resistance to acids, alkalis, and alcohols, making them suited for handling wide range of fluids. PVC and CPVC thermoplastic materials are lightweight and will not rust, scale, or pit. PVC systems offer temperature resistance up to 140°F, while CPVC systems withstand temperatures to...

Read More »
Clear PVC Pipe includes 10 and 12 in. diameters.
Pipe and Piping

Clear PVC Pipe includes 10 and 12 in. diameters.

Schedule 40 PVC Pipe is extruded in diameters of Â-¼-12 in., while Schedule 80 pipe ranges from ¼-6 in. dia. It is lightweight, corrosion-resistant, and installed using solvent-welding joining techniques. Available with variety of fittings and components, pipe is made from materials conforming to FDA standards and is compatible with standard PVC piping systems.

Read More »
Energy Transfer Pipe handles hot or chilled water.
Pipe and Piping

Energy Transfer Pipe handles hot or chilled water.

INSULPEX® consists of pre-insulated, flexible RAUPEX® pipe with smooth interior that eliminates corrosion. INSULPEX is produced with bonded layer of CFC-free polyurethane foam insulation that minimizes heat loss and water permeability. Outer casing of seamless, co-extruded polyethylene is black for UV resistance. Using cross-linked polyethylene, Non-Barrier Pipe and O2 Barrier Pipe...

Read More »
Sanitary Sewer Pipe features watertight joint.
Pipe and Piping

Sanitary Sewer Pipe features watertight joint.

Eliminating potential for infiltration and exfiltration, SaniTite(TM) is manufactured from 100% virgin HDB pressure-rated HDPE material engineered to exceed 100 year life. Ranging from 18-60 in. diameter, pipe comes in 20 ft lengths and withstands abrasion and corrosive attacks from acidic and aklaline soils as well as aggressive environment and chemicals. It is suited for industrial wastewater...

Read More »
An Introduction to Plastic Injection Molding
Sponsored

An Introduction to Plastic Injection Molding

We developed this eBook with designers, engineers and purchasing specialists in mind. It is written to provide a basic understanding of plastic injection molding presses, processes and costs. Our goal is to make our customers more knowledgeable about what goes into making a plastic part.

Read More »
Pipes and Fittings offer corrosion resistance.
Pipe and Piping

Pipes and Fittings offer corrosion resistance.

Available in sizes from Â-½-144 in., Plastic-Lined Metal Pipe and Fittings offer liners in PTFE, PFA, ETFE, ECTFE, PVDF, polypropylene, and polyethylene. Systems provide high-temperature corrosion resistance to most chemicals and can cut down on build-up of deposits on pipe walls. They are suitable for chemical, pharmaceutical, and food processing industries.

Read More »
Jacketed Piping transfers viscous materials.
Pipe and Piping

Jacketed Piping transfers viscous materials.

Jacketed Piping features inside pipe that transfers viscous material within outside pipe, which holds heating media to facilitate flow. Fully heating inside pipe for uniform control of viscous material transfer, piping is offered in straight lengths, elbows, 90°, tees, and valve configurations with various flanges. Inside pipe ranges from Â-½-14 in. ID and outside pipe ranges from 1-16...

Read More »
Pipe and Piping

Piping System suits DIW and PF applications.

Available in 2Â-½, 3, and 4 in. sizes, large diameter PROGEF® Natural (PP-n) Piping System is suited for Life Science applications. All components are made of FDA-listed and USP conformed materials. Translucent, corrosion-resistant properties of PP-n are combined with seamless fusion welds produced without any irregularities by BCF® Plus Fusion machine. Piping system is pressure...

Read More »
Pipe has 110 in. diameter.
Pipe and Piping

Pipe has 110 in. diameter.

Centrifugally cast, fiberglass reinforced, polymer mortar (CCFRPM) pipe has thin wall construction and OD of 114 in. It is suitable for direct bury, sliplining, microtunneling, and above ground installation for new construction and rehab. Standard 20 ft section weighs approximately 7 tons. Sections join with push-together, leak free, gasket sealed systems. It has inherent corrosion resistance and...

Read More »
Containment Piping meets EPA and OSHA regulations.
Pipe and Piping

Containment Piping meets EPA and OSHA regulations.

Joined via butt fusion, Duo-Pro® Double Containment Piping System protects against potentially serious leaks and spills. It consists of carrier and containment pipes constructed of corrosion-resistant thermoplastic materials such as Polypropylene, PVDF, Halar®, and HDPE. Available in various size combinations, from Â-½ in. carrier pipe to 24 in. containment pipe, pipes can be...

Read More »
Containment System suits pressure and drainage applications.
Pipe and Piping

Containment System suits pressure and drainage applications.

PowerGuard(TM) double containment system, molded from polypropylene or PVDF resin and joined with PowerCore(TM) electrofusion technology, permits joints in carrier pipe to be inspected prior to closing containment pipe. Pipe sizes from Â-½-18 in. may be specified. Flo-True(TM) anchors hold elbows and wyes in place to prevent expansion and contraction. Applications include pharmaceutical and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers