Pipe and Piping

Tapping Saddle installs in compressed air piping systems.
Pipe and Piping

Tapping Saddle installs in compressed air piping systems.

Engineered for continuous operating pressures from 150-230 psi, Air-Pro(TM) Compressed Air Piping System is offered with 150 psi rated tapping saddle available in 11 sizes from 2 x 1 to 6 x 2 in. Tapping saddle allows for installation of system with no drops; drops are installed after system has been hung by using tapping saddle welded in place with electro-fusion process. Saddle can be installed...

Read More »
Pipe and Piping

HDPE Pipe has 15 psi watertight joints.

Featuring reinforced polyethylene process that incorporates steel ribbing in pipe, DuroMaxx(TM) comes with structured outer wall profile and smooth internal surface. Suited for drainage and detention applications, steel composite pipe has no stress cracking and long-term stiffness. Available in 20 ft lengths and up to 120 in. dia, unit is compatible with joint-tight fabricated fittings and meets...

Read More »
Skyline Steel's Combined-Wall Pile System Meets the Demands of Port of Houston Terminal
Pipe and Piping

Skyline Steel's Combined-Wall Pile System Meets the Demands of Port of Houston Terminal

Marine Foundation with Spiralweld Pipe a First for Port of Houston HOUSTON, TEXAS - April 11, 2008 - Project engineers for a new cruise ship terminal at the Port of Houston chose Skyline Steel's combined-wall pile system as the primary structural element for the dock wharf. The combined-wall pile system alternates steel spiralweld pipe piles with AZ steel sheet piles to create a continuous...

Read More »
Modular Piping System comes in 76 and 100 mm diameters.
Pipe and Piping

Modular Piping System comes in 76 and 100 mm diameters.

Made from smooth and calibrated aluminum, SmartPipe(TM) compressed air distribution system promotes optimal flow and will not rust or corrode. Full bore fittings minimize pressure drop, and leak-free connectors prevent compressed air loss. All diameters can be integrated into existing systems and modified to accommodate changing needs. To facilitate integration, push-to-fit connectors can be...

Read More »
Pipe and Piping

GE Oil & Gas' Ultrascan Duo Pipeline Inspection Tool Selected for Transcanada's Conversion Project for 'Keystone' Pipeline

FLORENCE, ITALY - February 19, 2008 - GE Oil & Gas has been awarded a contract by a subsidiary of TransCanada Corporation (TSX, NYSE: TRP) (TransCanada) to deploy its ecomagination-certified UltraScan(TM) Duo pipeline inspection tool to evaluate portions of TransCanada's 864-kilometer (537-mile) pipeline that runs across the province of Saskatchewan and ends outside Winnipeg, Manitoba. GE's PII...

Read More »
CPVC Pipe is available in diameters up to 24 in.
Pipe and Piping

CPVC Pipe is available in diameters up to 24 in.

Available with plain end or belled one end construction, rigid extruded industrial CPVC pipe is resistant to corrosion and offered in 18, 20, and 24 in. diameter sizes with Schedule 40 and 80 dimensions. In addition to commercial hot and cold water distribution systems, product meets pressure and high-temperature drainage requirements for applications such as chemical processing.

Read More »
Pipe and Piping

Sanitary Sewer Pipe handles municipal waste.

Made from 100% virgin high density polyethylene (HDPE), SaniTiteÂ-® resists abrasion and corrosion resistance from acidic and alkaline soils and chemicals found in industrial waste and municipal sewer. Bell-and-spigot joint coupling system, which exceeds minimum requirement of ASTM D3212, provides continuous watertight performances, preventing water infiltration and sewer exfiltration....

Read More »
Air Distribution System uses modular aluminum piping.
Pipe and Piping

Air Distribution System uses modular aluminum piping.

Made from smooth, calibrated aluminum, SmartPipe(TM) compressed air distribution system will not rust or corrode. Full bore fittings minimize pressure drop, while leak-free connectors prevent compressed air loss. Push-to-fit connectors can be installed without threading or welding. Available in multiple sizes, SmartPipe is suited for headers and branch lines down to point of use. It can be...

Read More »
HDPE Pipe meets needs of water transportation and irrigation.
Pipe and Piping

HDPE Pipe meets needs of water transportation and irrigation.

Designed for low head irrigation projects such as ditch enclosures and pipe replacement, Model N-12 Low Head Pipe is available in 30-60 in. diameters. Long bells and spigots on pipe joint enable watertight performance. Pipe is extruded with pressure-rated resin in liner portion to allow continuous pressure of up to 5 psi. Resistant to soils or effluents with pH ranges of 1.5-14, pipe can support...

Read More »
Pipe and Piping

Pipe System eliminates vibration problems.

KALFLEX Flexible Wear Protection Pipe System connects structural components that move due to vibration, thermal expansion, or intended movement. KALMETALL hard cast iron segments are used in components to withstand impact wear and sliding abrasion, while ALRESIST alumina oxide ceramic segments with Moh's hardness of 9, are used for components exposed to extreme abrasive wear. Elbows are available...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics