Pipe and Piping

Pipe and Piping

Sanitary Sewer Pipe handles municipal waste.

Made from 100% virgin high density polyethylene (HDPE), SaniTite® resists abrasion and corrosion resistance from acidic and alkaline soils and chemicals found in industrial waste and municipal sewer. Bell-and-spigot joint coupling system, which exceeds minimum requirement of ASTM D3212, provides continuous watertight performances, preventing water infiltration and sewer exfiltration....

Read More »
Air Distribution System uses modular aluminum piping.
Pipe and Piping

Air Distribution System uses modular aluminum piping.

Made from smooth, calibrated aluminum, SmartPipe(TM) compressed air distribution system will not rust or corrode. Full bore fittings minimize pressure drop, while leak-free connectors prevent compressed air loss. Push-to-fit connectors can be installed without threading or welding. Available in multiple sizes, SmartPipe is suited for headers and branch lines down to point of use. It can be...

Read More »
HDPE Pipe meets needs of water transportation and irrigation.
Pipe and Piping

HDPE Pipe meets needs of water transportation and irrigation.

Designed for low head irrigation projects such as ditch enclosures and pipe replacement, Model N-12 Low Head Pipe is available in 30-60 in. diameters. Long bells and spigots on pipe joint enable watertight performance. Pipe is extruded with pressure-rated resin in liner portion to allow continuous pressure of up to 5 psi. Resistant to soils or effluents with pH ranges of 1.5-14, pipe can support...

Read More »
Plumbing Pipe is corrosion-resistant.
Pipe and Piping

Plumbing Pipe is corrosion-resistant.

HydroKing(TM) CPVC pipe meets ASTM D2846 requirements and is manufactured to SDR 11 specifications. Copper-tube-size 1/2-2 in. pipe is suited for both hot and cold water plumbing systems. Meeting NSF Standards 14 and/or 61 for quality and health effects, pipe does not contribute harmful substances to transported potable water.

Read More »
Clear PVC Pipe and Fittings allow visual flow assessment.
Pipe and Piping

Clear PVC Pipe and Fittings allow visual flow assessment.

Offered in 8 styles of fittings for pipe sizes from ¼-4 in., corrosion- and chemical-resistant Clear-40® pipe is manufactured from clear, virgin grade PVC compound and has slight blue tint. Rigid pipe, made to schedule 40 dimensions, does not need ties or clamps to be held upright or level. All ingredients are non-toxic and conform to FDA standards. Smooth interior pipe surface promotes...

Read More »
Pipe and Piping

Pipe System eliminates vibration problems.

KALFLEX Flexible Wear Protection Pipe System connects structural components that move due to vibration, thermal expansion, or intended movement. KALMETALL hard cast iron segments are used in components to withstand impact wear and sliding abrasion, while ALRESIST alumina oxide ceramic segments with Moh's hardness of 9, are used for components exposed to extreme abrasive wear. Elbows are available...

Read More »
Pipe and Piping

Corrosive Waste Piping Systems use molded 45° Wye fittings.

Fuseal® Polypropylene and Fuseal 25/50(TM) PVDF Corrosive Waste Piping Systems utilize fittings that feature smooth ID without any irregularities for uninterrupted flow path. Able to withstand acids, bases, and solvents, flame-retardant systems withstand intermittent corrosive fluids up to either 212° or 280°F, depending on model. Polypropylene and PVDF Double 45° Wyes...

Read More »
Pipe and Piping

Fiberglass Pipe is corrosion-resistant.

Capable of handling corrosive acids, alkalis, and solvents, Z-Core® centrifugally cast piping system is available in 1-8 in. sizes. Corrosion-resistant fiberglass pipe has design that facilitates installation. Fittings are offered to meet same level of performance specifications as pipe, resulting in totally bonded system that protects against leaks and fugitive emissions.

Read More »
Flame Retardant Piping meets ICC fire code.
Pipe and Piping

Flame Retardant Piping meets ICC fire code.

Kynar® 740-02 polyvinylidene fluoride (PVDF) thermoplastic piping meets flame and smoke requirements developed by International Code Council® (ICC) for material use in building plenums. Available with 0/10 or 10/35 ASTM E84 rating, product exhibits resistance to most chemicals at room temperature in acid waste drainage applications and can handle elevated temperatures to 150°C....

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers