Ovens

Inert Atmosphere Oven is electrically heated to 500°F.
Ovens

Inert Atmosphere Oven is electrically heated to 500°F.

With workspace dimensions of 38 x 38 x 38 in., No. 930 cabinet oven is used for liquid flow solder masking under nitrogen atmosphere. It features 30 kW installed in Incoloy-sheathed tubular heating elements, while 1,500 cfm, 1½ hp recirculating blower provides horizontal airflow to load. Other features include 4 in. insulated walls, aluminized steel exterior, Type 430 stainless steel interior,...

Read More »
Flash Dryers

IR Dryer suits adhesive curing and drying applications.

DryIR® Model 6040 concentrates IR heat directly to desired area, resulting in immediate evaporation. Designed for drying applications that require clean, responsive, non-contact heat source on target areas up to 4 in. wide, IR energy emitted from each heater can be adjusted to match specific heating requirements. Featuring modular construction, air-cooled unit incorporates digital power...

Read More »
Cabinet Oven features vertical airflow.
Ovens

Cabinet Oven features vertical airflow.

Electrically heated No. 929 is a 500°F cabinet oven with workspace dimensions of 26 x 38 x 50 in. Producing 700 cfm, ½ hp recirculating blower provides vertical upward airflow to as many as 16 shelves inside oven workspace. Oven features aluminized steel exterior, Type 304 stainless steel interior, and heavy-duty door and door frame with explosion-venting latches and 4 in. insulated walls.

Read More »
Electric Cabinet Oven features internal air filtration.
Ovens

Electric Cabinet Oven features internal air filtration.

Suited for curing Teflon®, No. 927 is a 750°F oven with Incoloy sheathed tubular heating elements that provide 64 kW. Two hp recirculating blower delivers 3,300 cfm horizontal airflow to load. With workspace dimensions of 50 x 50 x 50 in., oven includes 2 stainless steel, high-temperature, HEPA recirculating air filters and one HEPA fresh air filter with 2 in. prefilter. Exterior is...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Aging Oven tests liquid aging of elastomer compounds.
Ovens

Aging Oven tests liquid aging of elastomer compounds.

Bench Top Model 601 tests component swell and aging characteristics of molded rubber and rubber-like material formulations in fluids such as engine coolant, oil, and water at temperatures from 100-200°C. RI Model 601 has 6 testing stations for simultaneous testing of parts under pre-programmed time/temperature conditions. Digital PIC temperature controller maintains preset constant...

Read More »
Shelf Oven ages electrical components.
Ovens

Shelf Oven ages electrical components.

Electrically-heated, No. 926 is a 250°F oven with 12 kW installed in Nichrome wire elements and 1,000 cfm, 1 hp recirculating blower that provides horizontal flow. With workspace dimensions of 68 x 30 x 66 in., oven features 4 in. insulated walls, aluminized steel interior and exterior, plus 20 x 56 in. double-pane Lexan window in each of 2 doors. No. 926 includes disposable fresh air filter,...

Read More »
Belt Conveyor Oven is electrically heated.
Ovens

Belt Conveyor Oven is electrically heated.

Used for preheating molds, No. 924 two-zone, 350°F belt conveyor oven has workspace dimensions of 24 in. x 5 ft in Zone One and 24 in. x 20 ft in Zone Two, with 15 in. of height throughout. It has 80 kW installed in Incoloy-sheathed tubular elements, 4 in. thick insulated walls, and aluminized steel interior and exterior. Its 18 in. wide, heavy-duty, flat wire conveyor belt has ½ hp motor...

Read More »
IR Curing Tower improves manufacturing of medical tubing.
Desiccant and Membrane Dryers

IR Curing Tower improves manufacturing of medical tubing.

Infrared tower uses 2 Radround(TM) short wave IR heaters and drive system to cure silicone tubing at adjustable rates. Heaters have clamshell design and consist of rapid-response T3 lamps. Focused, 91.2 kW IR heat ensures tubing reaches green strength. Ready for product processing almost immediately on power-up, it cools fast enough so that product is not damaged when line stops. Parabolic...

Read More »
Conveyor Oven dries products up to 65 in. wide.
Ovens

Conveyor Oven dries products up to 65 in. wide.

Infrared Conveyor Oven features bank of 6 Radplane(TM) electric infrared heaters rated at 9.8 kW each, controlled in single zone, for total power of 58.8 kW. Air input plenum provides air across full width of heated area. Temperature is regulated by SCR control system, housed in NEMA 12 enclosure, that uses thermocouple feedback control loop to regulate voltage and maintain constant element...

Read More »
Infrared Oven speeds wire processing.
Ovens

Infrared Oven speeds wire processing.

Infrared Oven preheats fine-gauge and braided wire prior to fluoropolymer extrusion. Cylindrical Radround(TM) Series 40 electric infrared heaters incorporate quartz tubes that keep heat in process area. Oven packs 3 kW of power and measures 1.5 ft wide x 4 ft high. CS2000 controls use SCRs to regulate power input to infrared heating elements via thermocouple feedback control loops. Temperatures...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers