Ovens


BTU to Showcase Enhanced Energy Pilot Software at NEPCON South China
Ovens

BTU to Showcase Enhanced Energy Pilot Software at NEPCON South China

NORTH BILLERICA, Mass., – BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing and alternative energy markets, today announced that it will exhibit the PYRAMAX™ reflow oven and its enhanced ENERGY PILOT software in booth B-1F55 at NEPCON South China, scheduled to take place August 25-27, 2015, at the Shenzhen Convention...

Read More »
Ovens

Gemini Bakery Equipment Recently Installed an W/P Thermador Tunnel Oven for Neri Bakery

Neri Baking Products, located in NY, recently completed installation of a W/P Thermador tunnel oven.  The W/P Thermador was purchased to produce both hearth and pan specialty rolls. The Thermador is  equipped with a unique heat circulation system that will normally provide our clients with a reduced bake time, and a dramatic reduction of energy usage. The oven has several technology updates...

Read More »
Ovens

Gemini Bakery Equipment Installs 3 Sveba 62 Rack Ovens for Gabbys Bakery

Gabby's Bakery, a division of Gonnella Baking Company in Chicago, recently installed 3 Gemini/Sveba I 62 rack ovens.  These new ovens accommodate up to 60 pans per oven providing 180 pans of baking capacity, which is similar to the baking capacity of a 55 ft long x  12 ft. tunnel.  The I 62 Rack Oven was designed for the industrial wholesale bakery.  The ovens were purchased to increase...

Read More »
Ovens

LEWCO Ovens Utilizes the Heatcon Control System

SANDUSKY, OH – LEWCO, Inc. recently shipped a custom industrial oven to be used for vacuum bagged composite curing of repair parts by a foreign aircraft manufacturer. The oven includes a vacuum pump with a transducer on the main header and (2) manual vacuum ports. The control system features a Heatcon HCS-2040-12 controller. The Heatcon control system is widely used throughout the composites...

Read More »
Managing the New FGD Wastewater Regulations
Sponsored

Managing the New FGD Wastewater Regulations

EPA Steam Electric Power Generating Effluent Limitations Guidelines, or ELG’s, impact coal-fired power plant operations and their wastewater management. Specifically, the ELG’s impose limits for suspended solids, arsenic, mercury, selenium, and nitrate/nitrite for Flue Gas Desulfurization (FGD) wastewater. These regulations drive the need for technology based solutions that address and adapt to variables such as the nature of wastewater streams, types of contaminants, contaminant loading, and costs. In this guide you will learn about the best available technologies for complying with the new standards. One of the leading contenders in this process is the Fluidized Bed Reactor or FBR, which removes soluble selenium and other metals from FGD wastewater. Advantages of fluidized bed reactors include optimum microorganism efficiency, smaller overall footprint, steady-state operation, lower hydraulic residence times, system robustness, and lower costs. Download this guide for additional information on FBR technology for treating FGD wastewater, including pilot studies and tests, and polishing selenium removal options.

Read More »
Electrically Heated Walk-In Oven operates up to 1,200
Ovens

Electrically Heated Walk-In Oven operates up to 1,200

Offering 48 x 60 x 72 in. workspace, No. 901 utilizes 120 kW Incoloy-sheathed tubular elements to heat oven chamber and 12,500 cfm, 10 hp recirculating blower for horizontal airflow to workload. Unit features 10 in. thick insulated walls, comprising 2 in. of 1,900°F block and 8 in. of 10 lb/cf density rockwool. Constructed with aluminized steel exterior and Type 304, 2B finish stainless...

Read More »
Universal Style Oven heats heavy metal dies to 550
Ovens

Universal Style Oven heats heavy metal dies to 550

Providing 24 x 24 x 24 in. workspace dimensions, electrically heated No. 1034 utilizes 7 kW Incoloy-sheathed tubular elements to heat oven chamber and 400 cfm, 1/3 hp recirculating blower to provide universal front-to-rear airflow to workload. Oven features 6 in. insulated walls, aluminized steel exterior, and Type 304 SS interior with 2B finish. Measuring 24 x 24 in., two shelves are rated at...

Read More »

High-Performance Clean Process Oven Fulfills Depyrogenation Standards Under New Compounding Pharmaceutical Requirements
Ovens

High-Performance Clean Process Oven Fulfills Depyrogenation Standards Under New Compounding Pharmaceutical Requirements

LAKEVILLE. Minn. – As compounding pharmacists comply with tighter federal regulations enacted after the 2012 deadly fungal meningitis outbreak, a Florida pharmacist has discovered a clean process oven that is helping his compounding facility meet those higher depyrogenation safety standards. Pharmacist Vern Allen, chief executive officer for Premier Pharmacy Labs in Weeki Wachee, FL, began...

Read More »
Class 100 Cleanroom Cabinet Oven from Grieve
Ovens

Class 100 Cleanroom Cabinet Oven from Grieve

No. 1023 is a 550°F, electrically-heated, Class 100 cleanroom cabinet oven from Grieve, currently used for curing small rubber pieces in rotating drums at the customer's facility.  Workspace dimensions of this oven measure 26" W x 26" D x 60" H.  36 kW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 2000 CFM, 2-HP recirculating blower provides...

Read More »
Electric Vertical Conveyor Oven operates at up to 250
Ovens

Electric Vertical Conveyor Oven operates at up to 250

Offering 30 x 65 x 83 in. workspace dimensions, No. 963 utilizes Incoloy-sheathed tubular elements to heat oven chamber and 6,000 cfm, 5 hp recirculating blower to provide vertical upward airflow to workload. Oven has 4 in. insulated walls, aluminized steel exterior/interior, top-mounted heat chamber, and 2 independent doors for access to workspace and chamber. Measuring 24 x 6 in., product trays...

Read More »
Benchtop Oven suits production and laboratory applications.
Ovens

Benchtop Oven suits production and laboratory applications.

Supporting USB, Modbus, and Ethernet communications, datalogging LAC features 304 stainless steel interior, horizontal recirculating airflow, and ±2.5°C temperature uniformity at temperatures up to 500°F. Controls, heater, and fan are located on top for ergonomics and service access convenience. Available for processing flammable solvents or removing large amounts of moisture, standard Class...

Read More »
Aqua Dam Water Filled Flood Barrier
Sponsored

Aqua Dam Water Filled Flood Barrier

Aqua Dam is the ultimate solution for large-scale water control projects. It combines lightweight, large size, and portability all in one innovative product. To learn more about the uses, and applications of Aqua Dam, or to see it in action, check out our new video to get all the details.

Read More »

All Topics