Ovens

Reflow Oven is contained in 10 ft long unit.
Ovens

Reflow Oven is contained in 10 ft long unit.

Computer-controlled CR 5000F features upper and lower zones, each maintained to within ±1Â-ºC. It includes 3 thermocouple inputs as well as combination 22.4 in. SS mesh belt and pin-type conveyor with motor adjustable width from 1.97-17.7 in. Running on Microsoft® software, lead-free oven is also available in 6-, 8-, and 10-zone models to meet full range of production...

Read More »
Ovens

High-Temperature Cabinet Oven From Grieve

No. 965 is a 1350ºF (~733ºC) electrically-heated cabinet oven from Grieve, currently used heat treating titanium at the customer's facility. Workspace of this unit measures 24"W x 24"D x 24"H. 30KW are installed in nickel chrome wire coils, supported by a stainless steel frame, to heat the oven, while a 1300CFM, 1-1/2HP alloy recirculating blower provides horizontal airflow to the workload....

Read More »
Assembly Machinery

Wisconsin Oven Awarded Patent for Seat Dewrinkling Method and Oven

On March 27th 2007, Wisconsin Infrared Systems' parent company, Wisconsin Oven Corporation, was awarded patent # 7,197,239, Seat Dewrinkling Method and Apparatus" for their infrared seat ovens. Seat manufacturers use infrared seat dewrinkling ovens to remove wrinkles from upholstery materials on automobile seats and other vehicles. The process of sewing material on automobile seats leaves several...

Read More »
Ovens

Reflow Oven suits mid-volume PCB assembly.

Equipped with 10 reinforced PID temperature controllers in each of 5 upper and lower chambers, Model R-500 precisely profiles critical solder paste reflow parameters. Three thermocouple inputs are provided for real-time monitoring of component and PCB temperatures. Computer-controlled oven is available with 16 in. stainless steel mesh belt or combination mesh belt and stainless steel adjustable...

Read More »
Ovens

High Vacuum Oven addresses laboratory and industrial needs.

Providing capacity of 9 cu-ft, SVO-9 TURBO Vacuum Oven handles high vacuum levels in 1 x 10-6 range and temperatures up to 220°C. Smart Relay Control automates vacuum valves, as well as backfill, purging, and vent sequences. Temperature is controlled via Watlow programmable ramp and soak controller. Both roughing and turbo vacuum pumps are integrated, and are appropriately sized for...

Read More »
Electric Walk-In Oven is rated to 500° F.
Ovens

Electric Walk-In Oven is rated to 500° F.

Offering 54 x 72 x 72 in. workspace, No. 825 is equipped with 30 kW power installed in Incoloy sheathed tubular heating elements, and 6,000 cfm recirculating blower that delivers horizontal airflow across workload. Unit includes 4 in. thick insulated walls, 2 in. insulated floor with truck wheel guide tracks, aluminized steel exterior, and Type 304 2B stainless steel interior. For safety, oven...

Read More »
Sunburst EMS Announces Enhanced BGA Rework Capability
Rework Systems

Sunburst EMS Announces Enhanced BGA Rework Capability

July 3, 2007 West Bridgewater, Massachusetts, USA - Sunburst EMS announces the expansion of its SMT and BGA rework and servicing capability with the acquisition of a new A.P.E. 'Intruder' hot gas-based rework system to round out the company's PCB assembly capabilities. According to APE's Technical Director David Horvath, The Intruder system that we have supplied to Sunburst is designed especially...

Read More »
Electric IR Boost Oven utilizes fast-response heaters.
Ovens

Electric IR Boost Oven utilizes fast-response heaters.

Fast Response Electric Infrared Boost Oven System lets users boost temperatures of liquid or powder coated on small, medium, and large 3D products prior to entrance to hot air/convection oven. Equipped with electric IR heaters and controls, modular design allows for addition of more heated height and/or air recirculation system. System can be used as stand-alone complete cure oven or as boost...

Read More »
Draw Batch Oven Tempers Railcar Parts
Loaders

Draw Batch Oven Tempers Railcar Parts

May 23, 2007 Wisconsin Oven designed and manufactured an Electrically Heated Standard Draw Batch Series oven for tempering railcar parts and one Traveling Loader which utilized a pusher/extractor mechanism for loading & unloading parts on alloy trays. The equipment was rated for a 3,600 pound gross load and designed to accept a 3' wide x 2'6 high x 4' long customer supplied basket. The oven was...

Read More »
Custom, Heavy Duty Walk-in Oven is Built for High Temperatures
Ovens

Custom, Heavy Duty Walk-in Oven is Built for High Temperatures

Adapted from the 100 Series High Temperature Heavy Duty Walk-in Oven for a customer in the oil industry, this gas-fired oven will be used for stress relieving alloy steel. The oven operates at 1,100 degrees F and has adjustable louvers to provide a uniform temperature in the work area. The work chamber is 48" wide x 48" long x 72" high and will take parts up to 42" wide. The heat combustion...

Read More »

All Topics