Ovens

Infrared Conveyor Oven thermoforms medical stints.
Ovens

Infrared Conveyor Oven thermoforms medical stints.

Featuring 4 in. x 1 ft 2 in. x 1 in. heating chamber and 1,300°F maximum emitter rating, Infrared Conveyor Oven uses medium-wave V-Series panel heaters rated at 20 W/SI. Heater panels are arranged for both top and bottom heating for 2 separate zones of control with 1,686 W/zone. Roller chain supply conveyor is stainless steel with variable speed AC drive adjustable from 0.2-5 ips. Measuring...

Read More »
Salt Bath Furnaces suit various heat treating applications.
Ovens

Salt Bath Furnaces suit various heat treating applications.

With maximum operating temperature of 1,800°, Salt Bath Furnaces provide air/oxygen-free medium for heating steels. Models 183 and 185 feature 10 in. and 12 in. diameter pot, respectively, and can process 25-45 lb of steel or alloy. Both are suited for natural hardening, carburizing, nitriding, stress relieving, annealing, and tempering.

Read More »
Infratrol Manufacturing Corp. at "Coating 2009 West"
Overhead Conveyors

Infratrol Manufacturing Corp. at "Coating 2009 West"

New Berlin, WI Feb., 05, 2009 Infratrol Manufacturing Corp. will be displaying at the "Coating 2009 West", March 2 & 3, 2009 at Planet Hollywood in Las Vegas, NV, BOOTH #235. They will be displaying their EcoFlex powder coat system with a single stage, ambient pretreatment system and their MicroFlex powder coat system with a multi-stage water based pretreatment system. Both systems are complete...

Read More »
Convection Reflow Oven uses flux residue management system.
Ovens

Convection Reflow Oven uses flux residue management system.

VisionXP employs complete flux residue management system, which combines pyrolysis action mechanisms in preheating and peak zones with cold condensation in cooling zone. Complex molecules are broken down into simpler substances via temperatures from 500 to 900°C in anaerobic environment to avoid burning. Liquid residues and crystalline residues are thus reduced, resulting in optimal...

Read More »
Bench-Top Systems facilitate SMT assembly, prototyping.
Prototyping Systems

Bench-Top Systems facilitate SMT assembly, prototyping.

Computer-controlled pick-and-place unit, ECM-5611S, offers on-the-fly vision placement and bottom vision for larger components. It places range of fine-pitch devices on 10.6 x 5.9 in. area and holds 24, 8 mm tape feeders. With 18 x 22 in. frame capacity, SR2100 stencil printer offers precision screw alignment to boards; X, Y and Theta adjusting knobs; and double-sided board processing....

Read More »
350ºF Electric Cabinet Oven
Ovens

350ºF Electric Cabinet Oven

No. 1005 is an electrically-heated 350ºF (~177ºC) cabinet oven from Grieve, currently used for curing long composite parts held in fixtures at the customer's facility. Workspace dimensions of this oven measure 108"W x 18"D x 18"H. 15KW are installed in Incoloy-sheathed tubular elements to heat the unit, while a 1000 CFM, 1-HP recirculating blower provides horizontal airflow across the load....

Read More »
Baking Dry Boxes reclaim moisture-sensitive devices.
Miscellaneous Boxes

Baking Dry Boxes reclaim moisture-sensitive devices.

With T40W Series, surface mount devices and assemblies that undergo serious damage or failure from ambient moisture absorption can be restored to original condition. Dual-capability systems are low-temperature baking ovens as well as desiccant cabinets. As ovens, systems meet J-STD-033B maximum safe temperature requirement of 40°C, and as dry boxes, units provide RH level of less than 5%....

Read More »
Drum / Pail Heaters

Drum Heater

10/8/08 Benko Products offers a complete line of SAHARA drum heating ovens for heating 1 to 32 fifty-five gallon drums. Drum heating ovens replace inefficient homemade hot rooms and awkward band heaters. Steam or electrically heated, ovens feature spill containment capacity, temperature control, air circulation and optional stainless steel construction. Company Name: Benko Products, Inc. Phone:...

Read More »
750°F Electric Walk-In Oven
Ovens

750°F Electric Walk-In Oven

No. 941 is an electrically-heated 750ºF (~399ºC) walk-in oven from Grieve, currently used for drying resin mixtures at the customer's facility. Workspace dimensions on this oven measure 48"W x 48"D x 72"H. 60KW are installed in Incoloy-sheathed tubular elements to heat the unit, while a 4200 CFM, 3-HP recirculating blower provides horizontal airflow across the load. This Grieve walk-in oven...

Read More »
Turnkey Line enables flexible SMT assembly.
Assembly Machinery

Turnkey Line enables flexible SMT assembly.

Suitable for prototyping, short runs, or full production, Economy Turnkey Line features 3 main components. MC384 pick-and-place machine, offering speeds of 4,000 cph, includes 128-lane feeder capacity and ability to mount 0201s, CFPs, and Â-µBGAs in 14.5 x 13.4 in. placement area. Model 5500 Stencil Printer has independent, pressure-controlled dual squeegees and pneumatically controlled...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics