Ovens

Ovens

Curing Powder Coatings on Gaskets

Saving Energy and Space With a Heraeus Infrared System By installing an infrared oven Klinger UK Ltd has been able to achieve significant savings in energy costs in the curing of powder coatings on a range of sealing gaskets at its Bradford manufacturing plant. In addition, the infrared system occupies less than half the space required by the previous gas-fired convection oven and has also...

Read More »
Flash Dryers

Infrared Provides Bumper Results @ Honda

Increasing Efficiency of Bumper Spray Painting An infrared oven, fitted with fast response, medium wave heaters, from Heraeus Noblelight is helping to increase the efficiency of the spray painting of vehicle bumpers at Honda of the UK Manufacturing Ltd. Bumpers are painted with three coats. First a prime coat is applied, which is flashed off in a warm air oven before being cooled. A base coat,...

Read More »
Horizontal Heat Treating System suits aerospace industry.
Ovens

Horizontal Heat Treating System suits aerospace industry.

Designed to solution-treat aluminum, natural gas fired batch oven with non-heated manual quench tank accepts 4 x 4 x 4 ft basket and is rated for 1,250°F max and 1,100°F normal operating temperatures. Heating system features 500,000 BTU/hr air heat burner, and hearth consists of 2 rows of wheels rated for 3,600 lb loads. Recirculation system and programmable temperature controller...

Read More »
Infrared Heaters

Oscar Mayer Teams Up with Heraeus Noblelight - Ready Meals are Pre-Browned

Oscar Mayer manufactures a range of potato-topped and crumb-topped ready meals for major supermarkets and it is important, in terms of final presentation, that the products are pre-browned. By installing an oven using carbon infrared heaters Oscar Mayer has been able to eliminate previous maintenance problems, improve energy efficiency and liberate valuable floor space, at its food manufacturing...

Read More »
Miscellaneous Controls

Browning Convenience Meals - Infrared Heating of Oven-Ready Meals

A specially-built oven system, incorporating the latest carbon infrared technology, is helping Geest to achieve perfect browning of the toppings for a range of oven-ready meals produced at its Milton Keynes, England food factory. When Geest decided to install a new production line to produce a new range of products at Milton Keynes, it was agreed that this would be designed to include the most...

Read More »
Ovens

Body Moulding Oven - Using Short Wave Heaters in Vehicle Manufacturing

The Heraeus Body Moulding Oven is a custom system for pre-heating rubber mouldings prior to their being fixed to the vehicle. Mouldings are stored cold" in racks by the side of the oven and can be heated individually or in sets to 35- 45°C in just 6 to 8 seconds. Designed to meet specific customer needs, they have already been successfully installed in many leading vehicle manufacturing...

Read More »
Ovens

Powder Coating With Heraeus -- An Efficient Solution

Heraeus-Designed Powder Curing Process Pays Off for Whitehead Die Cutting When a gas-fired curing oven for powder-coated castings couldn't keep pace with production, Whitehead Die Casting turned to Heraeus Noblelight for a more efficient solution using electric infrared instead of gas. Complicating the challenge for Heraeus was the configuration of the castings most often being cured. Each of six...

Read More »
Poles

The Curing of Metals Using Infrared - The Demand for Quality Finished Light Standards

The president of a major US-based lighting standards manufacturer knew that the market for finished steel light standards is extremely competitive. To increase our market share we had to offer a higher-quality product. We also knew that our customers would not accept a price increase, so our only option was to increase productivity." The company did just that when it replaced the air-dried,...

Read More »
Conveyor Oven cures epoxy in automotive transmission parts.
Ovens

Conveyor Oven cures epoxy in automotive transmission parts.

Offering 2 zones of control, electrically heated Horizontal Conveyor Oven features 2 ft 3 in. x 5 ft 10 in. x 1 ft 8 in. chamber with max temperature rating of 350°F and normal operating temperatures of 176°F in zone 1 and 302°F in zone 2. Oven uses indexing parallel chain style conveyor system with cleat attachments for accurate rack positioning. Additional features include...

Read More »
Flash Dryers

IR Brings New Light to Manufacturing

The Processing of Metal Coatings Consumers of coated metal, wood, paper, glass, plastic and textile products are demanding attractive, long-lasting, wear-resistant surfaces. At the same time, stricter safety and environmental standards are forcing manufacturers to look at new types of finishes, e.g., water- based and powder coatings, and at different technologies to process them. Among the...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers