Flow Control Regulators have swivel outlets.
Meter out versions of Miniature and Compact Flow Control Regulators allow vertical or angle tube exit where access is restricted. Fine adjustment screw and locking nut provide precise, maintainable settings. Mounting directly on air cylinder, compact versions measure 2 in. high at full extension and are offered with fractional inch push-to-connect ends and NPT or UNF threads; Miniature versions...
Read More »
Flow Control Regulators measure under 1 in. in height.
Miniature Flow Control Regulators control speed of small-bore cylinders such as pancake/flat types. Fine adjustment screw allows precise settings, while lock nut ensures that settings are maintained. Units have push-to-connect tube ends with NPT threads. All feature glass-reinforced nylon composite body, SS tube gripping ring, and nickel-plated brass adjustment screw. Working pressure is 15-145...
Read More »
Flow Control Regulators withstand severe conditions.
Flow Control Regulators mount directly on air cylinder and come in meter out versions. Adjustment screw provides precise airflow control, and locking nut resists effects of vibration. Regulators are offered with NPT threads and push-to-connect fittings or NPT threaded ports. All have solid brass body treated for chemical resistance, SS tube gripping ring, and nickel-plated brass adjustment screw....
Read More »
Flow Regulators feature fine adjustment screw.
In-Line Flow Control Regulators are unidirectional flow control valves with female NPT threads that allow them to be spliced into air cylinder port line. Construction includes glass reinforced nylon composite body, stainless steel tube gripping ring, and adjustment screw components of nickel-plated brass. Available with working pressures from 15-145 psig, units may be installed as meter in or...
Read More »
MAXPRO® High-Pressure Custom and Standard Systems
At MAXPRO® Technologies, we welcome the opportunity to design a system to meet your specific system requirements. From boosting gas pressure for molding baby bottles to scavenging helium gas from decommissioned missile tubes to research laboratories, our team of high-pressure engineers and technicians bring a wide range of experience to the table when developing solutions for your high-pressure challenges.
Read More »
Flow Regulators are offered in two compact styles.
Flow Control Regulators are available with raised fine adjustment screw and locking nut or recessed, knobless adjustment screw. Both are offered in meter out versions to provide precise airflow control and speed regulation of pneumatic cylinder. Units are available in various sizes for fractional inch tube to NPT threads for mounting directly to cylinder. Working pressure ranges from 15-145 psig,...
Read More »
Dial Regulators eliminate need for traditional gauges.
Offered with balanced poppet/valve design, Dial Regulators have transparent, pressure-calibrated, non-rising adjustment dial used to adjust secondary pressure. Full reduced pressure range can be dialed in less than 270Ã-
Read More »
Thermal Disk Link is reusable and re-settable.
LloydStat(TM) works with smoke/fire damper equipment to prevent ductwork damage via controlled closing mechanism. It closes and locks damper upon smoke detection, fire conditions, or power failure via actuator closure spring. Unit operates using electric bi-metal disc sensor thermostat that interrupts power to actuator. Once activated, spring return closes and locks damper within 10-15 sec. Once...
Read More »Flow Restrictors provide safe control of anesthesia.
Sintered metal flow restrictors are used in anesthesia delivery systems, maintaining minimum oxygen flow and non-hazardous gas mixtures of nitrous oxide, helium, and/or carbon dioxide. They have no moving parts and provide repeatable, close tolerance flow rates. Units are constructed of non-shedding compatible materials and are resistant to plugging and fouling. They are custom manufactured and...
Read More »
Speed Control System provides high-accuracy regulation.
Brushless DC Series AUX, comprised of BLDC motor and speed control unit, provides 10, 25, 40, and 90 W output power levels. Available with single-phase 100-115, single-phase 200-230, and 3-phase 200-230 Vac power inputs, system does not require external DC power supply. Series maintains constant torque value over entire speed range of 100-2,000 rpm. It provides speed regulation of Ã-
Read More »
Damper Drive Module suits industrial applications.
Module, compatible with all damper types, includes integral manual override and modulating or on/off control with failure mode options. Suitable for new installations or replacing existing electric/pneumatic drives, unit provides accurate air/gas flow control to burners, heaters, boilers, and turbine systems in power plants, refineries, and additional industrial applications.
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
