Combi-Key IC integrates immobilizer, remote keyless entry MCU.
Supplied in 5 x 5 mm QFN32 package and targeted for uni-directional car keys, ATA5795 incorporates AES-128 immobilizer interface, remote keyless entry AVRÃ-® MCU, and fractional-N RF transmitter in one IC. Built-in AES-128 cryptographic engine, along with Atmel protocol stack, provides secure protection with accelerated authentication time. Complete open immobilizer protocol stack supports...
Read More »
Boundary Scan Controller complies with PCI bus specification.
SCANBOOSTER/PCI-DT boundary scan controller supports JTAG/Boundary Scan tests, VarioTAPÃ-® emulation tests, and in-system programming for PLD/FPGA as well as Flash serial EEPROM devices. Product consists of PCI plug-in card, external Test Access Port (TAP) transceiver unit, and 2 separate TAPs that can be programmed independently. Additional resources include 32 voltage-level-programmable,...
Read More »Capacitive Touch Controller is fully automotive-qualified.
Based on QTouchÃ-® capacitive touch technology for buttons, sliders, and wheels, AT42QT1110 meets all device specification requirements for GPS, window/mirror control, keyless remote entry, and other in-car automotive applications. This 11-key capacitive touch controller features firmware written according to Motor Industry Software Reliability Association C (MISRA C) standard and qualified...
Read More »
Microcontrollers (32-Bit) suit consumer, appliance, and industrial designs.
Products in STM32 Value Line combine 24 MHz ARMÃ-® Cortex(TM)-M3 processor core with peripheral features optimized for typical 16-bit applications. At 24 MHz with zero wait state embedded Flash memory access, these 32-bit MCUs delivers up to 30 DMIPS. Embedded, application-focused features include up to twelve 16-bit timers, including PWM timer for motor-control applications. As many as 26...
Read More »
Increasing Workplace Safety with Beryllium Medical Surveillance
To learn more about how you can develop a workplace safety plan that follows OSHA regulations and fits your company's specific needs, download now.
Read More »MCUs help portable medical devices become smaller, smarter.
Each MCU in MSP430FG47x series offers on-chip integration of complete signal chain - 2 configurable op amps, 12-bit DAC, comparator, and 16-bit ADC - to reduce design complexity. For applications that require high resolution signal conversion, 16-bit Sigma-Delta ADC is also available. Power consumption rate helps extend battery life up to 20+ years, and options are available for up to 60 KB flash...
Read More »
Automation Controllers offer GPS and LCD display.
Suited for industrial rated environments, Doberman DGM-410 and DGM-410LCD are M2M mini programmable controllers equipped with cellular transceiver intended to monitor industrial equipment and provide real-time status. Units include GPRS/GSM module, Ethernet interface, 3 digital inputs and 3 digital outputs, 8 analog inputs, 2 RS-232 ports, and 1 RS-485 port. Optional GPS model can serve as...
Read More »
Digital Signage Player relays true HD quality.
Able to bring Hi-Res images up to 1,920 x 1,200 directly to digital signs, SF-100(TM) suits companies planning installation of multiple screens or digital signage networks. It resides on posterior of digital signage screens and contains chip that allows for HD images to be sent to display through SCODEC(TM). Featuring VGA and DVI output options, solution is powered by Noventri Designer(TM) and...
Read More »
Embedded Controllers support CoDeSys programming language.
Compact and customizable Janz emPC-M series controllers support CoDeSys (Controller Development System) IEC 61131-3 open programming environment. They offer X86 processor architecture scalable from Geode LX 800 up to Core 2 Duo (1.5 GHz), and are available with Linux, Windows XP, XPEmbedded, Vista, WinCE5.0/6.0, or QNX OS. Interfaces include 2 x opto-isolated CAN/CANopen and 2 x 10/100 Mb/s...
Read More »Programmable Controller suits small applications.
ILC 170 ETH 2TX features 2 Ethernet ports with built-in Ethernet switch, which simplifies daisy-chaining of multiple units. It has data and program memory of 512 KB and retentive memory of 48 KB, along with 8 digital inputs and 4 digital outputs (500 mA) integrated on-board. Unit supports up to 3 local remote bus branch modules, Modbus TCP for data exchange to any Modbus TCP-capable device, and...
Read More »
LCD Controller comes with integrated touchscreen control.
Utilizing ATMEGA32 microcontroller and 4M bit AT45DB041B flash, TC405/851 controller board supports Optrex F-51405, F-51851 Series 240 x 64 STN monochrome graphic LCDs with 5.2 in. diagonal viewing area for characters/graphics display. Other features included are RS-232 communication interface with 9 programmable baud rates, 4 Mb flash memory, analog or 6 x 3 keypad w/flip option, AVRISP...
Read More »
What Can Test Devices Spin for You?
Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.
Read More »
