Extruded Neodymium Magnets are available for brushless DC motors.

Extruded Neodymium Magnets are available for brushless DC motors.

Available to replace individual arc segments or slabs with multipole ring magnet, extruded neodymium magnets for brushless DC motors come in different sizes. Magnets are made by extruding bonded neodymium compound through die with established ODs and IDs. With isotropic material characteristics, final magnet can be magnetized to any multipole pattern, including skew patterns, either before or...

Read More »
Magnet Assemblies will not mar surfaces.

Magnet Assemblies will not mar surfaces.

Consisting of RoHS-compliant shielded magnetic assembly with rubber jacket, GN 51.6 Steel Retaining Magnet Assemblies, Disc-Shaped, with Two Internal Threads and Rubber Jacket come in metric sizes and suit applications where surface is readily marred. Magnets' coefficient of friction lends to maximum lateral retaining force. While magnet housing is of zinc plated steel, magnet is neodymium, iron,...

Read More »
Disk-Shaped Retaining Magnet Assemblies have tapped hole.

Disk-Shaped Retaining Magnet Assemblies have tapped hole.

Resistant to temperatures up to 175°F, GN 50.5 Retaining Magnet Assemblies with Tapped Hole are shielded and come in metric sizes. Mounting screws must be made of non-magnetic material to ensure magnetic forces are not impaired. For magnets with d1 diameter ≤40 mm, magnet surface is exposed. For d1 diameters ≥50 mm, magnetic surface of magnet is covered with- technopolymer plastic...

Read More »
Neodymium Countersunk Magnets come in disks and assemblies.

Neodymium Countersunk Magnets come in disks and assemblies.

Manufactured with Neodymium grade 42, disk magnets offer holding forces as great as 20.5 lb. Also available,- two zinc-plated countersunk assemblies offer respective holding forces up to 70 and 350 lb. Countersunk magnet disks and assemblies are typically used in matched pairs that attract and may also be used singularly to hold steel doors, tools, or parts being machined.

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Lifting Magnet is powered by lithium-ion battery.

Lifting Magnet is powered by lithium-ion battery.

Available in standard sizes of 500, 1,000, and 2,000 lb, Permanent-Electro BEELiFT features pushbutton technology, lithium-ion battery, and external battery charger as well as low battery alarm, tilt sensors, and auto-on function for remote operation. Anti-demag safety mechanism prevents accidental release of load, while built-in degaussing feature removes residual magnetism. Option for handheld...

Read More »

Molycorp Chosen to Supply Rare Earths for Use in High-Efficiency Siemens Wind Turbine Generators

GREENWOOD VILLAGE, CO – Siemens AG ( Siemens ) has selected Molycorp, Inc. (NYSE: MCP) ( Molycorp ) to supply rare earth materials over the next 10 years from its Mountain Pass, California facility for incorporation into Siemens' high-efficiency, direct drive wind turbine generators.-  Molycorp will supply rare earth materials to Shin-Etsu Chemical Co., Ltd. ( Shin-Etsu ), which will produce...

Read More »
Magnetic Spray Gun Holder helps organize paint booths.

Magnetic Spray Gun Holder helps organize paint booths.

Designed to keep spray guns orderly and close at hand, Spray Gun Holder features forked arm that is capable of holding spray guns in variety of orientations.- Strong neodymium magnet allows- holder to attach to any steel surface, even through multiple layers of paint buildup. Measuring 4.9 in. in diameter, holder projects out 5.5 in. and offers weight capacity up to 95 lb.-

Read More »
Permanent Magnets hold metal inserts in place.

Permanent Magnets hold metal inserts in place.

In SmCo (samarium cobalt), A4300/… permanent magnets- can withstand temperatures up to 200°C on permanent basis and up to 300°C for short periods. There is no danger of losing magnetism or retention force, which also remains consistent, if used correctly. Available diameters include 6, 8 and 10 mm,- and front side can be contoured by up to 2.5 mm to align it to metal insert. To concentrate...

Read More »

Eriez® Pull Test Kits Now Available for Next Day Shipment through EriezXpress(TM) Program

Erie, PA- – Eriez® announces that its popular Pull Test Kits, used for measuring magnet strength, are now a part of the company’s EriezXpress™ line of products offered with expedited shipping. Upon credit approval, orders received by 4:00 p.m. EST are processed and shipped the next business day. Eriez Pull Test Kits are supplied with the customer’s choice of either an NIST traceable...

Read More »

Eriez® Introduces Orange University® Metalworking Demonstration and Training Vehicle

Erie, PA- – Eriez® introduces the Orange University® Metalworking Demonstration and Training Vehicle, a 32-foot Peterbilt diesel rig with a 24-foot equipment showroom. This state-of-the-art truck will travel throughout North America, delivering hands-on training and education to customers and distributors. The first tour will kick-off in early October. The Orange University Metalworking...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics