Machine Spindles

Kennametal and Haimer Sign Agreement to Supply Kennametal's Breakthrough KM4X Spindle Connection
Machine Spindles

Kennametal and Haimer Sign Agreement to Supply Kennametal's Breakthrough KM4X Spindle Connection

Manufacturers to benefit from combination of leading toolholding and spindle connection solutions In an agreement signed July 23, 2013, Kennametal has granted global toolholding leader Haimer GmbH (Igenhausen, Germany) license to provide Kennametal's new and advanced KM4X spindle connection solution throughout Haimer's global markets. Haimer, a global leader in toolholding technology and provider...

Read More »
Back Working Spindle suits Swiss turning applications.
Machine Spindles

Back Working Spindle suits Swiss turning applications.

Available in 20, 22, and 25 mm sizes, High Torque Back Working Spindles offer 234 W peak power with speeds to 60,000 rpm. Design facilitates installation, and spindles accommodate multiple locations –Â- back working as well as front and cross drilling – to promote versatility and productivity. Spindle package includes IBAG spindle drive, collet nut, wrenches, 3.0 mm...

Read More »
Machine Tool Runoff Cutting Titanium Confirms Advantages of 'Ultimate Tuned System'
Machine Spindles

Machine Tool Runoff Cutting Titanium Confirms Advantages of 'Ultimate Tuned System'

When it comes to sourcing capital equipment for machining specialty materials, many organizations would do well to remember the 10-speed bicycle analogy. People shop and buy a 10-speed bike for recreational or workout goals, but when riding rarely go beyond two or three of the most comfortable gears. Tour de France riders and other finely tuned athletes both size and operate all their components...

Read More »
Spindle Interface supports heavy-duty machining.
Machine Spindles

Spindle Interface supports heavy-duty machining.

Combining max clamping force and interference levels, KM4X(TM) provides optimal connection, stiffness, and bending load capacity for machining high-strength alloys. Three-surface contact results in 3x bending moment resistant capacity compared to other tool systems. Performing in wide range of operations, from low-speed/high torque to high-speed/low torque, KM4X can be applied on multi-tasking,...

Read More »
Spindle is designed for hard-metal machining.
Machine Spindles

Spindle is designed for hard-metal machining.

Suitable for 4-axis 1250/1600 HMCs, T-Rex spindle delivers up to 1,918 lb-ft torque into cut to optimize metal removal rates on large workpieces of hard materials, such as titanium, Inconel, and Carpenter 465. Configured with 107.3 hp driving power and 2 speed ranges up to 5,000 rpm, spindle is engineered with 5.1 in. ID bearings to handle 9,500 lb cutting thrust capability of HMCs. Equipment...

Read More »
Machine Spindles

Quick Change Tooling System supports small-batch production.

Unison quick-change tooling system is targeted for its all-electric tube bending machines. System covers all tooling components on machine, and includes barcode identification to verify changeover process. On 50 mm single-stack machine, fully validated changeover involving 6 basic tool components to switch from manufacturing one good part to another can be accomplished in less than 3 minutes....

Read More »
Machine Spindles

Motorized Robotic Spindles have compact, lightweight design.

With profile that accommodates use in tight areas, DynoSpindle Model 1860 series weighs 12 lb and is designed for precision finishing operations. High-torque, 2.5 hp motors are available with max speeds of 30,000, 40,000, or 60,000 rpm. Suited for robotic and non-robotic applications, U.S.-manufactured product comes equipped with standard collet tool holders and air purge bearing protection...

Read More »
Machine Spindles

Robotic Abrasive Grinding Spindles feature MTBF up to 2 years.

Designed for robotic grinding of abrasive and forged materials, Dynogrind(TM) series employs Dynoguard(TM) sealing system that promotes extended spindle life. With max range of 18,000 rpm, modular spindles are capable of handling various applications. Model HSE070-812289 weighs 33 lb, is rated at 8.5 hp and 12,000 rpm, and generates 3.8 lb-ft of torque. Each spindle comes with HSK tool change,...

Read More »
Tool Adapter System features quick-change design.
Machine Spindles

Tool Adapter System features quick-change design.

With HT Series, users change adapter only, not tooling, using single clamping bolt. Collet assemblies can be preset outside machine tool, then swapped out as needed. Featuring standard coolant-through design and repeatability to 0.0002 in., system is available with all common outputs, including collet, extended collet, collet with tension and expansion for tapping, weld-on, weld-on extended,...

Read More »
Machine Spindles

Lyndex-Nikken Partners with Mimatic® Tool Systems to Offer Leading European Live Tools for CNC Lathes, with an Initial Focus on Mazak Lathes

Mundelein, IL - Lyndex-Nikken continues to build upon its inventory of leading live tools with the addition of products from Mimatic Tool Systems' impressive line. Designed and manufactured to Mazak specifications in Germany, Mimatic live tools enhance the performance of CNC lathes. Mimatic live tool housings are machined from solid blocks of a special steel to achieve tight tolerances. Hardened...

Read More »

All Topics