Lightning Protectors

Surge Protector detects and protects against lightning.
Lightning Protectors

Surge Protector detects and protects against lightning.

Defender-Series M-1000 proactively detects lightning up to 1 mile away and automatically takes action to protect itself and critical electrical and electronic systems. It uses various switching units that isolate computers, PLCs, telephone systems and lines, data lines, CCTV video feeds, and CCTV equipment as well as mission critical electronic equipment.

Read More »
Lightning Protector has multi-strike capability.
Lightning Protectors

Lightning Protector has multi-strike capability.

Providing protection from lightning and static discharge where dc voltage is required, GX Series Bias-T Protectors have weatherized housing and are available with N, 7/16 DINTNC, and SMA standard connectors. Series covers 400-1,200 MHz (CGX protector) and 800-2,500 MHz (DGX protector) frequency ranges and has surge capabilities of 8/20 Â-µs @ 20 kA and 10/350 Â-µs @ 10 kA. Return loss is...

Read More »
Lightning/Surge Protectors offer CAT 5 compatibility.
Lightning Protectors

Lightning/Surge Protectors offer CAT 5 compatibility.

Configurable IX Protection Platform provides surge and lightning protection for data and Power Over Ethernet applications. Model IX-H suits applications up to 100 Mbps, such as Cat 5, UTP, and STP while Model IX-L supports applications up to 25 Mbps including T1/E1, RS422, and RS485. Model IX-M is targeted at RS232 platforms, and Model IX-DC24/48 fits 24 or 48 Vdc voltage power supplies. All are...

Read More »
Lightning Protectors

Surge Protection Hub provides single-point grounding.

Employing Sure/Fire Four-Port Building Block as basic element in surge protection design, additional blocks or hubs may be stacked vertically and horizontally for virtually unlimited number of surge protected devices. Faceplates may be color coded to define type of phone line, data interface, LAN, or I/O signal connection attached. Sure/Fire comes with RJ45, terminal block, DB9, DB25, and various...

Read More »
Lightning Protectors prevent electronic equipment damage.
Lightning Protectors

Lightning Protectors prevent electronic equipment damage.

SurgeGuard(TM) coaxial lightning protectors, offered in connector styles from F-type to 7-16, feature watertight construction. They protect against lightning surges with transient capacities to 100 kA, have 0.1 dB insertion loss, 1.1 VSWR, and are tuned up to 6 GHz. Products employ gas-tube or quarter-wave lighting protection technologies and are made of solid brass with nickel or tri-metal...

Read More »
Lightning Protector offers multi-strike capability.
Lightning Protectors

Lightning Protector offers multi-strike capability.

Model MDS+24-F-F is suited for broadband wireless and satellite applications from 300-2,500 MHz. It utilizes cascaded protection circuit resulting in let-through voltage of 48 Vpk and throughput energy of 1,000 Â-µJ for 3 kA at 8/20 Â-µs waveform. Unit provides low insertion loss of 1 dB and RF power of 50 W. Featuring 75 ohm F female connectors, flange mountable lightning protector...

Read More »
Resettable Switch provides overcurrent protection.
Lightning Protectors

Resettable Switch provides overcurrent protection.

Coated PolySwitch(R) TRW250-180 radial-leaded device protects ADSL modems, main distribution frame modules and central office, customer premise and access network equipment from lightning and power surges. It has rated hold current of 180 mA and helps design engineers meet ITU and Telcordia GR-974 requirements. Low-resistance, through-hole device limits fault energy, enabling OEMs to design...

Read More »
Lightning Protector handles up to 20,000 W.
Lightning Protectors

Lightning Protector handles up to 20,000 W.

Category 5 High Current protector offers full 20,000 watts of protection and field-tested (with 8/20 micro waveform) real-time CAT 5 functionality. During tests, units were tested repeatedly at 6kV/3kA without failure. Peak voltage seen at output was 33.2 Volts. Protectors are also available for both analog and digital phone circuits, which make them suitable for Voice over IP.

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics