LCR Meters

LCR/ESR Meter tests components at up to 200 kHz.
LCR Meters

LCR/ESR Meter tests components at up to 200 kHz.

Synthesized Bench In-Circuit LCR/ESR Meter, Model 889A, utilizes standard 115 Vac outlet as power source to test components with basic accuracy of 0.1%. It provides dc/ac voltage and current measurements as well as diode/audible continuity checks. Utilizing front panel-mounted BNC connectors and test leads, user can test variety of components such as inductors, capacitors, and resistors. Dual...

Read More »
LCR Meter offers accuracies better than 0.3%.
LCR Meters

LCR Meter offers accuracies better than 0.3%.

Model Z-8200 offers 100 Hz, 120 Hz, and 1 kHz test frequencies and has built-in comparator with 4-bin sorting capability. With series and parallel equivalent circuit modes, it also provides auto ranging with data hold, includes open and short circuit calibration, and pass/fail binning alarm. Measurement ranges include 1 mohm to 999.99 Mohm for resistance/impedance, 1 Â-µH to 999.99 H for...

Read More »
LCR Meter suits automated impedance testing.
LCR Meters

LCR Meter suits automated impedance testing.

Model 3550 measures within frequency range of 42 Hz to 5 MHz with measurement speed of 18 mS and accuracy of 0.10%. It offers 16 ac measurement parameters, 4,500 programmable frequency points, and built-in comparator with 10-bin capability. Additional features include 3 LED displays, RS-232C, and I/O connectors. Meter is suited for traditional component testing, materials characterization,...

Read More »
LCR Meters

LCR Meter measures 8 x 4 x 7 in. and weighs 5½ lb.

Model 3525 general-purpose programmable LCR Meter suits impedance parameter testing. Flexible design allows testing of capacitors, inductors, coils, resistors, materials, thermoelectric cooling devices, and piezoelectric sensors. Accuracy of 0.08% and measurement speed of 15 mS is provided. It also features 99 storable panel settings, dual 4Â-½ digit LED display, voltage and current...

Read More »
Auto-Ranging LCR Meter has RS232 interface.
LCR Meters

Auto-Ranging LCR Meter has RS232 interface.

Powered by 9 Vdc battery, handheld dual-display Model 879 measures capacitance, resistance, and inductance in 100 Hz, 120 Hz, 1 KHz, and 10 KHz test frequency ranges. Full 4Â-½ digit, backlit LCD reads values to 19,999 on each range. Unit provides simultaneous display of measured value and Q or dissipation factor. Microprocessor-controlled meter offers min/max average, relative mode, and...

Read More »
LCR/ESR Meter tests components at high speeds.
LCR Meters

LCR/ESR Meter tests components at high speeds.

Model 889 Synthesized Bench In-Circuit meter can be used to test inductors, capacitors, and resistors. It makes ac and dc voltage measurements, diode continuity checks, and LCR and ESR measurements at frequencies up to 100 kHz, with basic accuracy of 0.5%. When LCR measurement mode is selected, test frequencies of 100 Hz, 120 Hz, 1 kHz, 10 kHz, or 100 kHz may be selected on all applicable ranges....

Read More »
LCR Meter measures inductance, capacitance, and resistance.
LCR Meters

LCR Meter measures inductance, capacitance, and resistance.

Passive Component Model 380193 LCR meter measures inductance from 2000.0 microH to 10,000 H, capacitance from 2000.0 pF to 10.000 mF with 0.7% accuracy, and resistance from 20.000 ohms to 10.000 Mohms with 0.5% accuracy. It has RS-232 interface, 4Â-½ digit backlit LCD, test frequencies of 120 Hz and 1 kHz, Hi/Lo limits, and selectable parallel or series equivalent circuit. Optional...

Read More »
Impedance Instrument is traceable to NIST.
LCR Meters

Impedance Instrument is traceable to NIST.

Model 1730 LCR Digibridge will measure, display, and output results of any two parameters, including: series or parallel capacitance, ac resistance, inductance, dissipation factor, quality factor, equivalent series resistance, impedance, reactance, and phase angle. It is suitable for fast throughput of component evaluation in high volume production environment. It has 0.1% accuracy, test...

Read More »
LCR/ESR Meter tests components at up to 100KHz.
LCR Meters

LCR/ESR Meter tests components at up to 100KHz.

Model 886 Synthesized In-Circuit LCR/ESR Meter is designed for component evaluation and fundamental impedance testing. Utilizing built-in test fixture, users can test lead components. Included SMD test probe allows users to conduct SMD component testing. Model 886 offers test conditions including 100Hz, 120Hz, 1KHz, 10KHz, 100KHz, 1Vrms, 0.25Vrms and 0.05Vrms. It features DC resistance...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers