Hydraulic Cylinder has cylinder differential tie rod.
Featuring leak-free fluid connection ports, CDT1 Series NFPA hydraulic cylinder incorporates removable rod bearing, sealing system, and secured air bleed. With nominal pressure of 1,500 psi, bore diameter from 1-8 in., and piston rod diameter from Ã-½-5Ã-½ in., product accommodates fluid temperature range of -4 to +176Ã-
Read More »
Aluminum Cylinders have strength of steel.
Hydraulic, aluminum cylinders include single-acting RAC Series, double-acting RAR Series, RACL Series single-acting lock-nut, and RACH Series single-acting hollow plunger. Constructed from 7075T-6 aluminum Alloy with Hard Kote treatment, products incorporate composite bearings on all moving surfaces, removable hardened saddles, and steel base plates. They provide lifting capacities from 20-150...
Read More »Clamping Cylinders suit tool and die industries.
Series CHH and CHL hydraulic high-pressure clamping cylinders are offered with NPT or SAE ports and have double rod end option. Extruded steel Series CHH is available in 20-80 mm bore sizes with through bolt or foot mounts. Extruded aluminum Series CHL is offered in bore sizes from 32-80 mm. For mid- to end-of-stroke position sensing, reed or Hall effect switches are available.
Read More »
Cylinder provides cushioning to eliminate pressure peaks.
Model CDT3 ISO hydraulic cylinder features self-adjusting, end-position cushioning with integrated throttle and check valve function. One-piece piston, with polyurethane or PTFE piston seal and fabric-reinforced phenolic resin bearings, eliminates stick slip and provides positive sealing. Captive air bleeds are standard on head and cap to assist in system commissioning. Both male and female rod...
Read More »
UNLOCKING THE HIDDEN POTENTIAL OF MANUFACTURING: How lubricants can help increase productivity and reduce total cost of ownership
This paper illustrates how manufacturing companies have successfully worked with Shell Lubricants to upgrade their lubrication and extract value by reducing TCO and improving equipment productivity.
Read More »
Workholding Cylinders feature maximum hydraulic sealing.
Hydraulic Swing Cylinders are available in capacities ranging from 300 to 7,600 lbs of force with strokes ranging from 1/2 to 1 7/8 in. They are offered in Buna-N and Polyurethane as well as VitonÃ-® for high temperatures or use in severe environments. Treatment on outside of cylinder bodies prevents surface corrosion for extended periods, and stands up to coolant and cutting fluids. Seal...
Read More »
Double Acting Cylinders lift up to 1,500 tons.
RDA Series is available in variety of models with capacities of 10 through 1,500 tons. Cylinders have collar threads and base mounting holes, so they can be quickly fixtured virtually anywhere, indoors or outdoors. Double-acting design provides means for controlled retraction, while allowing cylinders to produce force in both advance and retract cycle. Internal surfaces are sealed for protection...
Read More »
Hydraulic Cylinders have large hollow hubs.
Short stroke, hydraulic cylinders are designed for installation where independent linear or rotating motion is required through hollow piston. Four standard sizes are available for operating at 3,000 psi with choice of strokes to 4 in. in increments of 1/10 in. Applications include tool and fixture designs, test equipment and structural projects, as well as tooling aids for use in large machine...
Read More »
Hydraulic Cylinders work for pulling or tensioning.
Hydraulic pull cylinders come in 2 or 5 ton capacities with 5 in. of stroke. Made of high quality steel, cylinders incorporate threaded piston and base ends for easy attachment of tooling or accessories. They have plated pistons for corrosion resistance, and 3/8 in. NPT ports with quick disconnect couplers. Optional clevis attachment is available for piston or base end of pull cylinders.
Read More »
NFPA Stainless Steel Tie-Rod Cylinders are pre-lubed.
SS series requires no additional lubrication. Standard 250 psi pneumatic and optional 400 psi non-shock hydraulic cylinders are available with single or double rod end, oversized rods and 1-1/2 to 8 in. bore sizes. Non-rotating SS-NR series has 1-1/2 to 8 in. bores. SS-MSE/MSR versions are available in 2, 3 and 4-stage force multiplying models. Both 125 psi pneumatic and low-pressure hydraulic...
Read More »
Cylinders are available with bore sizes from 3/4 to 8 in.
Q6 Hydro-Line Cylinders come with pressure-energized nitrile rod seals and nonmetallic piston wear rings. Pre-lubricated from factory, cylinders are suitable for non-lubricated air service up to 250 psi. Q6 NFPA-interchangeable cylinders feature precision-machined aluminum end caps and self-aligning, externally removable rod cartridge assemblies. Hydraulic HQ6 tolerates pressures to 400 psi, and...
Read More »
Precision Machined Parts for High Tech Applications
For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.
Read More »
