Hose Clamps

Hose/Tubing Clamps suit space- and weight-restricted areas.
Hose Clamps

Hose/Tubing Clamps suit space- and weight-restricted areas.

Resistant to effects of UV, ozone, and weather, LBBU Series facilitates hanging of pipe, hose, cable, and tubing. Clamp bodies are made of thermoplastic elastomer (87 Shore-A), which helps reduce vibration and noise. Single- and double-line clamp styles are available in sizes from 6-18 mm dia for applications where space is limited and noise must be minimized, such as hydraulics/pneumatics,...

Read More »
AME Introduces Clamping Products from Jakob Antriebstechnik
Hose Clamps

AME Introduces Clamping Products from Jakob Antriebstechnik

Advanced Machine & Engineering Co. (AME) is introducing several new workholding clamping products from Jakob Antriebstechnik, the company's European partner. The series MC power clamping nut offers simple manual operation, high clamping forces through force magnification and high operating safety, as a result of a self-locking feature. The clamping force ranges from 40 to 160 kN. This product...

Read More »
Hose Clamps

Insulation-Piercing Wire Clamp ensures positive contact.

Available with various lead or cable interface options, XB insulation-piercing wire clamp features thumbscrew that locks down bed of nails and V-Groove that centers wire in order to provide optimal stability. Interior brass housing holds 34 heat-treated steel needles, and chemical-resistant nylon exterior housing limits exposure of metal parts when engaged. Clamp accepts max wire diameter of .150...

Read More »
Hose Clamps

Qosina Extension with Flow Controller

Edgewood, NY, April 10, 2007 - Qosina is pleased to add a new Extension Set with Flow Controller (Part # 17549) to our inventory. Our 15 inch long extension set is built of PVC tubing with a polycarbonate flow controller bonded within the tubing length. The ABS male luer and PVC female luer are bonded on the tubing ends. Each luer has a polyethylene cap. The flow controller's clearly marked...

Read More »
Pin Clamps target robotic assembly applications.
Hose Clamps

Pin Clamps target robotic assembly applications.

Featuring vanadium carbide coating on pin for resistance to wear, Pin Clamps are suited for applications where 2 parts must be held together in alignment while assembly is performed. Power Lock cylinder is spring-actuated to close and air-driven to open. Load check mechanism with switch confirms panel is present on actuator, eliminating need for external sensing devices. Various configurations...

Read More »
Tubing Clamps come in three distinct styles.
Hose Clamps

Tubing Clamps come in three distinct styles.

Offered in stainless steel and zinc plated carbon steel, Oetiker® ear type clamps breathe to adapt to expansion and contraction while remaining secure and tamper-proof. Stainless steel worm gear clamps, also available, install by screwdriver tightening. Lined version is available for use with very soft tubing. Manufactured from UL-listed black nylon 6-6, Kwik Clamps(TM) will not rust or...

Read More »
Clamps are suited for grounding rigid conduit systems.
Hose Clamps

Clamps are suited for grounding rigid conduit systems.

Featuring copper strap that facilitates alignment and protects conduit systems from vibrations, BGCS line of UL listed and CSA certified clamps include ground wire range of 3/0-10, water pipe range of Â-½-1 in., and conduit hub size range of ½-1 in. Incorporating zinc plated screws, cast bronze clamps are offered with or without saddle for connecting ground wire to pipe.

Read More »
Worm Gear Clamps join rubber/silicone hoses and duct lines.
Hose Clamps

Worm Gear Clamps join rubber/silicone hoses and duct lines.

Manufactured with 300 series stainless steel housings and bands, Micro and Standard Series come with 5/16 and Â-½ in. wide bands, respectively, and can be specified with zinc plated or stainless steel worms. Micro Series comes in SAE sizes 4 and 6, while Standard Series is available in 22 sizes from SAE 6-104. Common installations include HVAC and plumbing applications, and clamps can also...

Read More »
Hose Clamps

CTL Machine pre-installs band clamps onto hoses.

CTL Bowl with automatic opening station features feed bowl system that places CTLs (Constant Tension Light) Band clamps in jaws of pneumatic hose clamp plier, which is activated and deactivated by proximity switches. It then compresses clamp in open position, and allows operator to position hose before closing clamp. Semi-automated machine is suited for applications such as small engines,...

Read More »
V-Band Couplings for Filter and Exhaust Applications
Hose Clamps

V-Band Couplings for Filter and Exhaust Applications

Wadsworth, OH (August 2006) Clampco Products, Inc., a Wadsworth-based manufacturer of stainless steel T-bolt clamps and V-band couplings, offers its line of V-band couplings to original equipment manufacturers in the heavy duty filtration and exhaust markets. Clampco's V-band couplings are engineered to meet the exact specifications for each product application. The V-band couplings, also called...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers