Hose Clamps

Hose Clamps come in 25-piece contractor packs.
Hose Clamps

Hose Clamps come in 25-piece contractor packs.

Intended for contractors and big jobs, 25-Piece Contractor Packs include Ideal-Tridon®Â- hose clamps in SAE sizes from 4–64. All stainless steel clamps are USA-made and are UPC certified. Bags are resealable bags for future use with abundant quantity that helps minimize wasted time shopping for clamp.

Read More »
Self-Adjusting Stainless Steel Hose Clamp provides 360° seal.
Hose Clamps

Self-Adjusting Stainless Steel Hose Clamp provides 360° seal.

Providing spring compensation over 360°, SMARTSEAL™ constant pressure clamps are suited for use in environments prone to temperature extremes and vibration. Integrated 2-piece design includes clamp assembly and SmartLiner with channel. While clamp grips by deeply penetrating into hose wall over narrow cross-section, roundness eliminates leak paths, and trough shaped design creates optimal...

Read More »
PIRTEK Offers a Whip Check System as a Safety Measure for Equipment Operators
Hose Clamps

PIRTEK Offers a Whip Check System as a Safety Measure for Equipment Operators

Safety is always the primary concern when operating hydraulic equipment and machinery. If an end fitting becomes disconnected from a high pressure hose the release of energy contained inside can cause serious injury to anyone operating or working on the equipment. The Whip Check System offered by PIRTEK is a retention system designed to restrain the hose from the Whipping Effect" created by the...

Read More »
Hose Clamps

Future Electronics Offers WAGO's Maintenance Free CAGE CLAMP® Technology

Pointe Claire, QuebecÂ- – Future Electronics, a global leading distributor of electronic components, offers WAGO's maintenance free CAGE CLAMP® technology, with intuitive lever operation. Products include the 811 Series Fuse Holder, available in multi-pole configuration and with indication, with a 14 - 6 AWG wire range, providing reliable, maintenance free wiring for fusing needs in...

Read More »
Tube Clamps aid assembly and seating during manufacture.
Hose Clamps

Tube Clamps aid assembly and seating during manufacture.

Offered inÂ- 3 sizes, Welker tube clamps provide narrow back-up and clamp for holding pipe and tubing. Dual hardened fingers, when actuated, center and securely grip tube against v-block. Located beneath v-block, interchangeable spacer allows multiple diameter tubes to be used in same fixture within clamp size range. Compact cylinder, included, features multiple port...

Read More »
Hose Clamps

Extended Nose Clamps combine usability and gripping power.

Comprising two 3-ton, self-tightening, spring-loaded clamps, CL Series helps auto body techs grip hard to reach spots or those located in confined areas. Extended nose promotes reach, cross-hatch teeth design lends to gripping power, and swiveling pull ring minimizes chain twist. While both 8 in. long models have 1Â-¼ in. wide x 27/32 in. deep gripping surface with min throat clearance of...

Read More »
Clamping System Kit works with Haas rotary indexers.
Hose Clamps

Clamping System Kit works with Haas rotary indexers.

Available in kit, modular Unilock Zero-Point Clamping System is specifically designed for all Haas 160 mm platter rotary indexing tables. Equipped with ISM 160 single chuck solution for face of 4th or 5th axis rotary tables, adapter rests between chuck and spindle face of rotary indexer itself. Zero-point clamping uses spring pressure to drive multiple clamping pins against tapered clamping knob....

Read More »
Stainless Steel Cable Clamps resist corrosion.
Hose Clamps

Stainless Steel Cable Clamps resist corrosion.

Designed to clamp cable or tubing securely into place, Heyco® Stainless Steel Cable Clamps come in standard corrosion-resistant 304 SS and insulated LDPE-coated 304 SS. Both have smooth coined clamp edges to prevent damage to cable insulation, and are designed for .203 in. mounting hold diameters. LDPE clamp, featuringÂ- FDA food contact approval, is coated with polyolefin, which is...

Read More »
Platinum Tools Adds New Bridle Rings and Beam Clamps for Cable Management
Hose Clamps

Platinum Tools Adds New Bridle Rings and Beam Clamps for Cable Management

Now Shipping, New Bridle Rings and Beam Clamps Offer an Efficient, Secure, and Cost Effective Solution for Low-Voltage Installations CAMARILLO, Calif. – Platinum Tools® (www.platinumtools.com), the leader in solutions for the preparation, installation and hand termination of wire and cable, is proud to announce that it has added five new Threaded Screw Bridle Rings (p/n JH802 though...

Read More »
Welding End Prep Tool Designed for Highly Repetitive Milling
Hose Clamps

Welding End Prep Tool Designed for Highly Repetitive Milling

A portable welding end prep tool that features air-operated clamping which reduces cycle times for highly repetitive end prep milling in fabrication shops is available from ESCO Tool of Holliston, Massachusetts. The MILLHOG® Mongoose Air Clamp™ Welding End Prep Tool is equipped with an air-operated clamp that attaches to a tube or pipe I.D. and releases from it by simply flipping a toggle...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers