
Latest Surface Mount Fuse is UL 248-14 Listed and cURus Approved
Comes in 5.3 x 16 mm.package and provides unprecedented overcurrent and short circuit protection. Offers up to 50 A current ratings with a breaking capacity rating of 500 A at 125 VAC / 72 VDC. Intended for use in circuits using one of 3- phase wiring schemes and has temperature range is -55°C to 125°C.
Read More »
New MF-MSHT Resettable Fuse is UL, TUV, and RoHS Compliant
Features low thermal derating factor and hold current range of 200 mA – 1.75 A. Constructed using blend of high melting point polymer materials and carbon-based conductive fillers. Available in 1812 surface mount package and has maximum voltage range of 9 V – 42 V.
Read More »
New PolySwitch Low Rho SMD Series Available in Hold Currents from 0.75 to 9.0 A
Available in maximum voltage from 6.0 V to 24 V all in surface mountable sizes from 0402 to 2920. Offers less power dissipation resulting from ultra-low internal resistance. Ideal for consumer electronics, USB Type A and Type B ports and lithium batteries.
Read More »
New 0ZT Series Fuses Feature Fast Time to Trip and Low Resistance
0ZT series is suitable for applications which require a high operating temperature range of -40°C to 125°C. Fuses are halogen-free and lead-free ad well as packaged in tape and reel for the auto-insert SMD process. Ideal for automotive applications such as electronic systems control and monitoring, infotainment and climate control.
Read More »
An Introduction to Plastic Injection Molding
We developed this eBook with designers, engineers and purchasing specialists in mind. It is written to provide a basic understanding of plastic injection molding presses, processes and costs. Our goal is to make our customers more knowledgeable about what goes into making a plastic part.
Read More »
New Chip Fuses Features Voltage Rating of 50 VAC/63 VDC
0685P series feature current rating from 2 A to 50 A as well as an operating temperature of -55°C to +125°C. Designed for automotive and other applications that require high I2t values and high surge withstand performance. Suitable for both leaded and lead-free reflow/wave soldering.
Read More »
New PolySwitch zeptoSMDC Series Resets to Normal Operation After Fault is Cleared
Provides robust overcurrent and overvoltage protection on the signal lines for both the lithium ion battery pack ICs and fuel gauge. Available in the small 0201 surface-mount size and ideal for increasingly small mobile and wearable product designs. PPTCs are for high voltage 13 VDC applications.
Read More »
New Surface Mount Fast-acting Chip Fuses for Handling Excessive Current
0ABA Series feature 32 V DC voltage rating of 200mA to 4A current rating and an operating temperature of -55ºC to +125ºC. Designed for consumer applications that require a physically small fuse including cell phones, rechargeable battery packs, LCD monitors, battery chargers, LED lighting and power tools. Suitable for both leaded and leadfree reflow/wave soldering and are halogen-free and...
Read More »
New Modular Fuse Exhibits Low Internal Resistance
UMF 250 series is halogen-free and compatible with lead-free soldering processes. Offered with fifteen rated currents 500 mA to 15 A. Provides overcurrent and short circuit protection in primary and secondary circuits for a wide range of applications including battery management systems, medical equipment, lighting systems and power supplies.
Read More »
Universal Modular Fuse Is Now Approved Up To 10 A By VDE
Santa Rosa, California, July 07, 2020 – SCHURTER announces VDE approval for its 10 A Universal Modular Fuse, UMF 250, according to IEC 60127-7/1. Offered with fifteen rated currents, 500 mA to 15 A, the quick-acting SMD fuse was previously approved by VDE up to 8 A. The complete range is also cURus approved according to UL 248-14 and CSA22. An ideal alternative to traditional 5x20 mm...
Read More »
New UMT-W Fuse Ideal for Applications with Long Wires
Available in five rated currents from 5 A to 20 A and reaches rated voltages of up to 125 V AC & DC with a breaking capacity of up to 1000 A. Offered with super time-lag tripping characteristics. Suitable as a fail-safe device in demanding applications.
Read More »
Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics
Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.
Read More »