Power Distribution Systems

Mersen to Showcase Complete Portfolio of 1500vdc PV Products at Solar Power International 2016

NEWBURYPORT,Â- MA — Mersen will display its complete portfolio of 1500VDC components for the growing solar market during Solar Power International, September 12-15 in Las Vegas, Nevada. Launched in mid-2015, this comprehensive product portfolio was developed for early design into 1500VDC systems. With a dedicated range of products to disconnect, clip and isolate, that includes string and...

Read More »
Mersen Proudly Sponsors University of Washington for Ecocar3 Competition
Electrical Boxes

Mersen Proudly Sponsors University of Washington for Ecocar3 Competition

The EcoCAR 3 Advanced Vehicle Technology Competition challenges sixteen North American university teams to redesign a 2016 Chevrolet Camaro to reduce its environmental impact, while maintaining the muscle and performance expected from this iconic American car. Teams are tasked with enhancing the vehicle with cutting-edge energy efficient powertrains that retain high standards for safety and...

Read More »
Compact SMD Fuses are available with 20, 25, and 30 A ratings.
Electrical Fuses

Compact SMD Fuses are available with 20, 25, and 30 A ratings.

Offering 24 current ratingsÂ- from 160 mA to 30 A at voltages up to 277 Vac and 250 Vdc, UMT-H series features 1,500 A breaking capacity and suits intrinsically safe applications. This time-lag fuse, with VDE and UL approvals and >10 mm spacing between end caps, meets IEC 60127-7/1, UL 248-14, and CSA C22.2 standards; provides overcurrent and short circuit protection in...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Electrical Fuses

SMD Fuse enhances reliability in space applications.

Featuring compact, sealed, and robust construction that promotes reliability and long-term stability, High Current Space Fuse (HCSF) targets space applications requiring high-current fuse performance. Ratings range from 5–15 A @ 125 Vdc withÂ- breaking capacity of 1,000 A. Rated currents from 5–10 A are qualified according to ESA/ESCC 4008/002 listing requirements.

Read More »
Fuses

Medium Voltage Fuse integrates controllable actuator modules.

Applicable whether searching forÂ- sensitive overload protection solution or arc-flash mitigation, 15 kV Medium Voltage Controllable Fuse (MVCF) fits into existing fuse cabinets and integrates controllable fuse actuator/interface modules, fiber optic cable connection, and low-voltage control cabinet. Design facilitates connection and installation within standard transformer fuse...

Read More »
Heavy Duty Fuse Clip supports 10.3 mm diameter fuses.
Electrical Fuses

Heavy Duty Fuse Clip supports 10.3 mm diameter fuses.

Featuring tin-plated design, CSO Fuse Clip is suitable for applications with voltages up to 1,500 Vac/Vdc and currents up to 32 A. Solder version allows direct mounting on printed circuit board by means of through-hole technology, whileÂ- screw/rivet version provides additional flexibility for basic designs. Characterized by strong clamping force, clip is suited for wide range of PV and...

Read More »
Power Entry Module can be used in Protection Class II equipment.
Electrical Connectors

Power Entry Module can be used in Protection Class II equipment.

Designed according to IEC 60320-1 (style C18), Class II KMF supplied without ground pin and suitable forÂ- medical equipment used in residences. Double insulation between energized components and exposed parts is tested with 4,000 Vdc. Available with 2-pole line switch and 1- or 2-pole fuse holder, module supports current ratings from 1–10 A at 250 Vac...

Read More »
Class J Fuse Holders come in 30 A and 60 A models.
Electrical Fuses

Class J Fuse Holders come in 30 A and 60 A models.

Available in 1-, 2-, and 3-pole configurations, E90 Class J Fuse Holders ensure safety during maintenance operations with capability to be sealed in closed position and be padlocked in open position. Touch-safe, 90°, flip-hinged handle facilitates fuse replacement, even in small spaces or when wearing protective gloves. Designed specifically for North American industrial market, UL-listed...

Read More »
Electrical Fuses

Fused Panelboard and Fuse help achieve code compliance.

To help achieve NEC® compliance, UL67 listed Fused Coordination Panelboard provides combination rated circuit breaker and fuse for branch circuit protection that ensures fuses will open only on short circuits. FCP offers 2:1 coordination ratio with upstream Amp-Trap 2000 fuses and provides default short circuit current rating of 200 kA. With plug-in retrofit to existing MV fuses, Medium...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers