New Flowmeters Products

DP Gauges and Flowmeters have Class 1, Div. 2 hazard rating.

Suited for use where dangerous gases and vapors may exist, differential pressure (DP) gauges and flowmeters offer operating ranges from 5 in. of water to 1,000 psi DP and flow rates from 0-10 gpm. Switch and gauge-switch combinations with Class 1 - Div. 2 hazardous rating are available in DP models 1203, 1503, 1516, 1803, and 1833 as well as in flow models 2223 and 2323. Switches are SPST or SPDT...

Turbine Flow Meters aid in low-volume fuel blending.

Available in 1, 1.5, and 2 in. line sizes, Daniel Series 1200 flow meters meet needs for flow measurement in continuous fuel blending operations. Series is designed to help manufacturers and OEMs comply with environmental legislation that stipulates use of ethanol in place of Methyl Tertiary Butyl Ether (MTBE) as a gasoline oxygenate by measuring low volumes of additives required in fuel blending.

Pressure-Based Flow Meter offers real-time outputs.

Featuring NEMA 4 housing, F-Series uses pressure change through venturi to determine flow of gas. No sampling, calculating, or averaging is required. Available 0-10 V or 4-20 mA, ranges start below 1 scfm and extend through 250 scfm. Product is available in 5 different port sizes.

Flowmeter is suited for water and low-viscosity fluids.

With no moving parts to stick or coat, Coolpoint(TM) vortex shedding flowmeter measures and monitors flow of fluids with accuracy to Ã-

Tips for Managing Dangerous Dust in Manufacturing Facilities

This eBook covers important considerations when creating a dust management plan for your facility. For more information, download now.

Air/Gas Flowmeter has no moving parts.

Insertion-type Model ST50 measures air flow from 1-125 sfps, nitrogen from 1-150 sfps, and compressed air from 4-400 sfps in line sizes from 2-12 in. It features fully temperature-compensated thermal flow sensing element constructed with lithography etched platinum RTDs embedded in equal-mass thermowells. Available as blind transmitter or with LCD digital display, meter offers +0.5% full scale...

Flow Meter is rated IP 65/NEMA 4.

Smart Flow Meter is available in two capacities, Model SFM 275A for flows from 180-2,100 ftÃ-³/hr, and Model SFM 350 for flows from 350-7,000 ftÃ-³/hr. Meter can be used as feeder, meter, or batcher with accuracy better than +0.5% or +1%, depending on application. With use of built-in bypass feature, it can be tared at any time during measuring process. Product is suited for high rate...

Mass Coriolis Flow Meters suit variety of applications.

Utilizing Coriolis principle, KCM series flow meters are process control tools that allow real-time measurement of density and flow in liquids and slurries. Available in single- or dual-tube designs, meters have no moving parts and smooth flow tubes of 316 stainless steel. Rated for medium temperatures to 250Ã-

Calibrated Flow Simulator provides portable operation.

Model GS 8 B provides calibrated feedback to electromagnetic meter converter to simulate specific calibrated flow conditions. With 5 selectable simulated flow range settings plus zero flow, it enables accurate verification of flowmeter converters. Compatible with many 4-wire converters, passive device derives its operating power from the converter.

Mass Flow Meter utilizes Coriolis principle.

Available with single or dual tubes, Series KCM allows real-time measurement of density and flow in liquids and slurries. Meters have no moving parts and feature smooth, 316 stainless steel flow tubes. Rated for temperatures to 250Ã-

Mass Coriolis Flow Meter delivers real-time measurements.

Utilizing Coriolis principle, KCM series employs process control tools that allow for real-time measurement of density and flow in liquids and slurries. Product features 10.5% accuracy and comes in single- or dual-tube design. Rated for temperatures to 250Ã-

Innovative Dampney Coating Systems Suit Even the Most Specialized Applications

Dampney's high performance coating systems provide protection against extreme weather, chemicals, and corrosive environments for atmospheric, immersion, and underground applications. Check out the video to learn more.