
Latest Thermal Flow Meter Comes with Wet Gas MASSter Technology
Features accuracy of ±1% of reading, ±0.5% of full scale and repeatability of ±0.5% of reading. Can measure flow rates as low as 0.25 SFPS [0.07 NMPS] and provide 100:1 turndown. Provides measurement in pipe diameters from 1 to 99 in. (25 to 2500 mm.) and in temperatures up to 850°F (454°C).
Read More »
New Variable Area Flowmeter Comes with Alarm Option
Features 316 stainless steel construction and polycarbonate shield. Glass tube transparent scale improves readability and allows for offset correction to compensate for process variation. Process connection can be rotated 360 degrees.
Read More »
New QCT_PA12 Series Flow Meters Available in Sizes from 1/8 to 2 in.
Accurate to +/- 0.5% of reading plus zero stability and repeatability is +/- 0.2% over 10:1 calibration range. Available with 0.035 to 250 GPM flow range and 14 to 176°F temperature range. Ideal for measuring low-viscosity liquids in industries such as chemical, food and beverage.
Read More »
New XFM Mass Flow Meters with Extended Flow Rates up to 1000 L/min
XFM57, XFM67 and XFM77 incudes optional local 2 x 16 characters LCD display with adjustable back light. Programmed remotely via RS-232/RS-485 or optional Profibus DP interface. Supports jumper selectable 0-5 Vdc or 4-20 mA analog outputs as well as status LED diagnostics.
Read More »
Thermal Solutions Guide: The Challenges for Heavy Equipment OEMs
In this guide, we consider some of the most common applications that require thermal solutions, such as vehicle exhausts, fuel tank shielding, and engine compartments, firewalls, & underbodies. As well as the options available to mitigate risk around combustion engines.
Read More »
New MIM Electromagnetic Flowmeters Incorporate IO-Link
Offer configurable optical buttons that can be used to display parameters such as flow rates or temperatures. Changing color system in the display provides warning for limit violations. Can be used for very small nominal pipe sizes and covers an even larger measuring range.
Read More »
New Thermal Mass Flow Meter with Backlighted Informational LCD Display
ST80 series with AST measures in CT mode when measuring in low flow ranges and start-up conditions. Suitable for pipe diameters from 1 to 99 inches and air/gas temperatures up to 850°F. Transmitter enclosure is NEMA 4X/IP67 rated, with NPT or metric conduit ports.
Read More »
New Thermal Mass Flowmeters Measures Pure Gases and Gas Mixtures
t-mass F and I operate at process temperatures up to 356°F and pressures up to 580 psi. t-mass 300/500 is equipped with heartbeat technology as well as metrologically-traceable device verification. Measure and account for gas flows in both flow directions and detect reverse gas flows.
Read More »
FLEXIM Announced Winner of the 2020 Flow Control Innovation Awards
FLUXUS ST Non-Intrusive Steam Meter a Recognized Technology Solution for Industries Utilizing Steam Applications EDGEWOOD, N.Y., Oct. 21, 2020 /CNW/ -- This October, Flow Control announced its winners and honorable mentions for the 2020 Flow Control Innovation Awards. This awards program highlights companies that have developed technological breakthroughs that are redefining process...
Read More »
New Clamp-On Ultrasonic Flow Meters are Housed in NEMA 4X Polycarbonate Enclosure
Feature enhanced flow measurement with no pressure drop in a range of applications such as food or chemical processing plants, and oil refineries. Operate from 100 – 240VAC and offer isolated 4-20mA output that can transmit flow readings to remote displays, recorders, or controllers. Offer programmable relays that are useable for flow control, pump protection or flow proportional, built-in...
Read More »
Thermal Flow Meters Optimize Waste-To-Energy Plant Boiler Intake Air Flow and Flue Gas Measurement
High Accuracy and Repeatability Under Demanding Operating Conditions San Marcos, CA—June 30, 2020—Engineers challenged with designing or operating waste-to-energy incineration plants will find the ST80, ST100 and MT100 Thermal Mass Flow Meters from Fluid Components International (FCI) offer them accuracy, repeatability, ease of installation and low maintenance to enhance plant performance...
Read More »
TPA Motion Introduces New Curved Linear Rail Guides: the CR40 Series
For the ultimate in precision open and closed loop guided motion systems, TPA Motion is the leader in curved rail, liner guides. We specialize in engineering excellence, with products that exhibit an elevated level of precision, delivering robust performance, even under the most challenging conditions. See our video to learn more.
Read More »