Air Flow Sensor protects hysteresis dynamometer.
Air flow sensor for company's Hysteresis Dynamometers provides protection against operator error. When sensor is used with company's DSP6001 Dynamometer Controller, it does not allow dynamometer brake to be energized until blower or air supply has been turned on. Air flow sensors can be retrofitted to company's ED-715 and 815, HD-510, 710, 715 and any HD-800 Series dynamometers.
Read More »
Feed Sensor verifies flow of liquid through pumps.
PosiFlowO, suitable for EH and EZ Series pumps, detects flow of liquid output by pump, which verifies metering pump is moving liquid and has not lost prime. It does not incorporate any moving parts, and offers preserved flow path to eliminate plugging or jamming. Output signal stops if pump loses prime, is in dead-head condition, or if pump loses pressure due to broken discharge line. Input...
Read More »Flow Transmitter automatically scales analog output.
Model SI 1004, for liquid and gas applications, adjusts 4 to 20 mA output to open and close valve or adjust speed of pump. Bar-graph display provides local indication of flow rate. Sensor operates on calorimetric principle where cooling effect of flowing fluid is used to monitor flow rate. Transmitter has no moving parts, is packaged in one-piece housing, and has stainless steel wetted parts. It...
Read More »
Flow Sensor offers electronic alternative to rotameters.
Model 104 Liquid Flo-Sensor measures flow rates of fluids as low as 13 mL/min with Ã-
Read More »
Thinking About Manufacturing Automation?
Check out this white paper to learn how cobots are able to automate manual processes.
Read More »
Flow Sensors replace rotameters.
Model 106F Liquid Flo-Sensors measure flow rates of fluids as low as 15 ml/min with +/-1.0% linearity and +/-0.2% repeatability, full scale. TeflonÃ-®, Kal-Rez, and sapphire construction provides compatibility with virtually any chemical, including acids or alkalines. Sensors provide electronic alternative to ball-and-tube rotameters. Seven different power and output configurations are...
Read More »
Ultrasonic Flowmeter is easy to install.
Non-invasive portable Model UF10A measures liquid flow with accuracy of 2% over flow ranges of 0.13 to 26 ft/sec. Easy to install, transducers mount directly to pipe materials such as stainless steel, cast iron, PVC, copper, and concrete with diameters of 1/2 to 4-1/2 in. Set up is simple using 15-key tactile keypad. Seven digit LCD indicates flow rate in user programmable units such as GPM, LPM,...
Read More »
Ultrasonic Flowmeter features IP65 construction.
Time Delta M flowmeter offers menu-driven programming via built-in keypad, 4-20mA rating, pulse frequency, totalizer, and alarm outputs. Unit has multiple language support, enabling users to program and view data in their native language. Clamp-on sensors eliminate concerns associated with ultrapure or toxic fluids and contamination.
Read More »
Flow Meter uses Microwave Doppler technology.
Flow Detect 1000 non-contact flow sensor provides signal indicating flow/no-flow condition of solids or powders in pipelines, air-slides, chutes, bucket elevators, transfer points and conveyor belts. Microwave Doppler technology is virtually unaffected by noise, light, pressure, heat, humidity or dust. Used for automation purposes, Flow Detect 1000 switches process equipment on or off as required.
Read More »
Air Data Boom includes total air temperature sensor.
Model 100900 heated, 4-vane air data boom provides supersonic data collection of angle of attack, angle of sideslip, static pressure, total (pitot) pressure, and total air temperature. Based on heated probe wind-tunnel tested to Mach 1.3, boom is constructed from machined aluminum, stainless steel, and copper alloys. Probe is 28 Vdc powered at 145 A, and meets requirements of MIL-T-5420B and SAE...
Read More »
Flow Meter handles raw sewage, irrigation, and stormwater.
Area-Velocity Flow Meter (AVFM) monitors flow through open channels, partially full sewer pipes, and surcharged pipes without flume or weir. Submerged ultrasonic sensor continuously measures both Velocity and Level in channel. Fouling- and corrosion-resistant sensor is tolerant of turbulence. AVFM can be configured with submerged Velocity/Level sensor, or with submerged velocity and separate...
Read More »
SpillVak Absorbs Up to 6X More Fluid Than Rock- and Clay-based Absorbents
Are you struggling to find an absorbent that doesn't result in at least some leaching? SpillVak outperforms all rock and clay-based materials. Check out our video to learn more.
Read More »
