End Mills

Seco Tools Highlighting Variety of Tooling Solutions at WINDPOWER 2011
End Mills

Seco Tools Highlighting Variety of Tooling Solutions at WINDPOWER 2011

Troy, Michigan - Seco Tools will be showcasing solutions for a wide range of wind power machining applications at WINDPOWER 2011. The company will exhibit its products in booth #3308 at the event, which takes place May 22 - 25 at the Anaheim Convention Center in Anaheim, California. Visitors to Seco's booth will see the new generation Double Octomill R220.48 face milling cutter, a versatile tool...

Read More »
Ball-Nose End Mills profile small parts.
End Mills

Ball-Nose End Mills profile small parts.

Designed for profiling in medium hard to hard steels, CoroMill Plura End Mills come in 0.1-12 mm diameters, suited for all small die and mold, electronic fiber optic connector, and medical tooth implant manufacture, where high precision is important. Produced in fine grained solid carbide grade with multi-layered PVD coating, tools have geometry design that prevents radius from deteriorating from...

Read More »
Seco Tools to Showcase Wide Range of Tooling Solutions at AeroDef Manufacturing 2011
End Mills

Seco Tools to Showcase Wide Range of Tooling Solutions at AeroDef Manufacturing 2011

Troy, Michigan - Seco Tools will be demonstrating a comprehensive range of tooling solutions for aerospace and defense applications at AeroDef Manufacturing 2011. The company will exhibit its products in booth #1778 at the event, which takes place April 5 - 7 at the Anaheim Convention Center in Anaheim, California. In recent years, Seco Tools has concentrated heavily on developing tooling...

Read More »
High-Density End Mills promote efficient titanium roughing.
End Mills

High-Density End Mills promote efficient titanium roughing.

Featuring 16-flute design, CYCLO CUT Max-Flute end mills run at 2,037 rpm and 231 ipm to enable machining of internal structures in titanium, Inconel, and stainless steel components with removal rates up to 8 in.Â-³/min with 25 lb-ft torque and 9 hp. Shallow, radial widths of cut minimize heat transfer to cutting tool and maximizes surface speeds for roughing high-temperature alloys. Used in...

Read More »
End Mills

Five-Flute End Mills cut titanium and stainless steel.

Able to cut hard-to-machine metals such as superalloys, titanium, and stainless steel, enDURO® 5-flute end mills maximize metal removal rates and productivity, and optimize finish in high-power and lower-power machining centers. They are designed with advanced geometries and specialized coatings for maximum cutting efficiency and precision, and are available in various end designs, shank...

Read More »
End Mill Cutters support diverse materials and applications.
End Mills

End Mill Cutters support diverse materials and applications.

Ranging from 1-20 mm dia depending on design, High Productivity Cutting (HPC) End Mills are made from micro-grain carbide and address applications such as complex 3D machining, roughing, and pre-finishing operations. Combination of cutting tool technologies, such as variable pitch and flute spacing, minimize vibrations even at elevated speeds and substantial cutting depths. Reliability and chip...

Read More »
Solid Carbide Endmill handles aerospace material machining.
End Mills

Solid Carbide Endmill handles aerospace material machining.

Engineered specifically for machining exotic and difficult to machine materials, XE solid carbide endmill is coated with PVD Nano TiAlN and has geometric design with deep flutes and high helix cutting edges. Design attributes to fast, cool running as well as efficient chip evacuation. Additionally, shaft length helps maximize clamping and reach while also minimizing vibration.

Read More »
WIDIA(TM) Finalizes Brand-Migration Efforts - Consolidates MetCut(TM) and MetalRemoval(TM) Products
End Mills

WIDIA(TM) Finalizes Brand-Migration Efforts - Consolidates MetCut(TM) and MetalRemoval(TM) Products

(LATROBE, PA) - WIDIA Products Group(TM), unveiled at last year's EMO Milan show, is announcing the completion of the brand's consolidation with MetCut(TM) and MetalRemoval(TM) tools now moving under the WIDIA Products Group umbrella. The brands will now be known as WIDIA-MetCut(TM) and WIDIA-MetalRemoval(TM). The result of this multi-year consolidation is a complete portfolio of milling,...

Read More »
End Mills

Milling Cutter suits roughing and finishing of cast iron.

Through use of tangentially mounted inserts accompanied by adjustable axially mounted wiper inserts, SumiMill GOALMILL Milling Cutter provides optimal surface finishes. Each insert offers 8 indexes when using single-handled cutters. Four indexes can be used on periphery pockets, and flipping insert on its side allows for 4 more indexes in finishing cartridge. GOALMILL Cutter is available for...

Read More »
High-Feed Shell Mill Cutter yeilds high level of material removal.
End Mills

High-Feed Shell Mill Cutter yeilds high level of material removal.

Stellram® 7792VXE16 high-feed shell mill cutter provides high-speed metal removal in titanium and titanium-based alloys, nickel-based alloys, and cobalt-based alloys. Tool directs cutting forces axially into spindle, minimizing spindle wear. Able to take repeated shallow depths of cut, unit is capable of face milling as well as pocketing, slotting, and plunging. It is compatible with...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics