End Mills

Multi-Flute Carbide Endmills perform rapid stock removal.
End Mills

Multi-Flute Carbide Endmills perform rapid stock removal.

Offered in sizes from Â-¼-1 in. dia, SUPERMILL TOMCAT 5-flute carbide endmills run at high rpm and feed rates for rapid stock removal. Tool geometry enables feed rates of 200 ipm on steels, alloy steels, and stainless steels, allowing users to perform more high speed finishing radial cuts instead of slower roughing cuts, which can help speed production time. Sharp corner, corner radius,...

Read More »
End Mills

End Mill has tough design for production environments.

Able to accommodate high-volume operations, POWoRoFEED® M924 features reinforced cutting edges, which are resistant to chipping and wear, as well as AlCrNX engineered coating that imparts heat protection. Both features provide extended tool life, while free cutting action, optimized rake and relief angles, and 38° helix enable higher feed rates.

Read More »
Ball-Nose End Mills machine hard ISO-H materials.
End Mills

Ball-Nose End Mills machine hard ISO-H materials.

Featuring heat-resistant TiAlSiN-based coating for extended tool life, Prototyp Protoomax(TM) Ultra End Mills come in standard versions from 3-12 mm diameter and mini versions from 0.1-2.5 mm for small to extremely small contours. All diameters have 2 cutting edges and helix angle of 30°. Solid carbide tools are suited for machining hardened materials up to 70 HRC in die and moldmaking, as...

Read More »
Coolant-Through Drills can be used with diverse materials.
End Mills

Coolant-Through Drills can be used with diverse materials.

In addition to coolant-through capabilities, HY-PRO® CARB 3D and 5D Drill Series feature point and flute geometry that reduce thrust forces and chip size. Applied multi-layered TiAlN coating resists thermo-cracking from heat, improving wear resistance, and overall design fosters achievement of higher feeds and metal removal rates. Common DIN shank sizes promote rigidity while reducing...

Read More »
Cutting Heads facilitate milling, drilling, chamfering.
End Mills

Cutting Heads facilitate milling, drilling, chamfering.

End mills, each with 2 cutting edges, extend depth of cut for CoroMill 316 exchangeable head milling system to 0.8 x Dc. Ballnose option, suited for profile milling, aluminum machining, and finishing, also has cutting edge for profile roughing. Able to accommodate chip evacuation problems when slot milling, corner radius option suits slot/shoulder/plunge/face milling, ramping, and pocketing....

Read More »
Tooling System features changeable milling head.
End Mills

Tooling System features changeable milling head.

Prototyp ConeFit(TM) solid carbide milling system is available with spade-type compression molded, changeable cutting heads suited for copy and plunge milling, chamfering, centering, and spot-facing holes. For graphite machining, PCD coated N50 variants are available as 4-flute cutters with corner radius and as double-edged, ball-nose end mills. Protoomax(TM)ST end mill provides maximum metal...

Read More »
Cutters and Inserts hasten heavy-duty application feed rates.
End Mills

Cutters and Inserts hasten heavy-duty application feed rates.

Optimized for cuts of 1.250-4.000 in. dia, RHINO-FEED(TM) Heavy-Feed cutters and inserts allow for accelerated feed rates in moderate- to heavy-DOC and -FPT applications. Heavy-Feed 12 mm IC (inscribed circle) inserts have 4 usable edges and strong cross-section. End mills and shell mills feature top clamping strength suitable for heavier DOC (up to .060 in.) and larger machines, such as 50-taper...

Read More »
End Mills

New IMCO M525 End Mill, High-Efficiency Machining Form Dynamic Duo in Titanium, Stainless Steel

Higher feed rates in nasty-hard metals; test results in new enDURO® catalog (Perrysburg, OH) - The nastiest metals on earth have met their match with the new enDURO® M525 end mills, introduced this month with a 20-page catalog from IMCO Carbide Tool. Bred for higher feed rates in titanium and stainless steel, the M525 and its 5-flute variations have been tested in machine shops in...

Read More »
End Mills

WIDIA Products Group Named ISA 2011 American Eagle Award Winner

Saving Customers Time and Money LATROBE, Pa. - For showing exceptional documented cost savings or productivity improvements to an end user," the Industrial Supply Association (Pittsburgh, PA) awarded WIDIA Products Group and Ron Wallace & Associates its American Eagle Value-Added Partner Award at the 2011 ISA Product Show and Conference (May 14-17, Rosemont, IL). WIDIA and Ron Wallace &...

Read More »
Seco Tools Highlighting Variety of Tooling Solutions at WINDPOWER 2011
End Mills

Seco Tools Highlighting Variety of Tooling Solutions at WINDPOWER 2011

Troy, Michigan - Seco Tools will be showcasing solutions for a wide range of wind power machining applications at WINDPOWER 2011. The company will exhibit its products in booth #3308 at the event, which takes place May 22 - 25 at the Anaheim Convention Center in Anaheim, California. Visitors to Seco's booth will see the new generation Double Octomill R220.48 face milling cutter, a versatile tool...

Read More »

All Topics