Electronic Drivers

Construction Equipment and Supplies

Digital LED Controller ICs foster adoption of smart lighting.

Along with 88MZ100 ZigBee controller, 88EM8189 smart AC/DC LED controller features I²C control interface, integrated standby power supply for networking circuit, and backward compatibility with legacy dimmers. Based on 88EM8801 intelligent DC/DC dual-channel LED controller, 88EM8803 offers LED output range up to 60 V, 1 A for each channel; I²C interface for wireless lighting control; and...

Read More »
AC Input LED Drivers are offered in low-power versions.
Construction Equipment and Supplies

AC Input LED Drivers are offered in low-power versions.

Eliminating flicker while promoting efficiency, DLE25 and 35 series come in IP67-rated, 3.68 x 2.89 x 1.29 in. enclosure and incorporate universal input with active PFC in 2 power stage design. Drivers, designed as class II isolation product without need for safety earth, are also approved as class 2 limited power source. Dimmable constant current versions are available with facility for PWM,...

Read More »
Construction Equipment and Supplies

Future Electronics Promotes the MIC58xx Series of Latched Drivers from Micrel Semiconductor

Pointe Claire, Quebec – Future Electronics, a global leading distributor of electronic components, promotes the MIC58xx Series of latched drivers from Micrel Semiconductor. The MIC5891 Series includes the MIC5891YN, an 8-bit serial-input latched driver with a 15 V 5 MHz typical data input rate, available in a DIP-16 package. The MIC5891 latched driver is a high-voltage, high current integrated...

Read More »
Construction Equipment and Supplies

LED Drivers support front and rear automotive lights.

Designed for rear lights, Model TPS92630-Q1 provides single LED short detection and full diagnostic capabilities, giving designers flexibility to meet different countries' traffic regulations. Device supports up to 15 IC connections on one bus, as well as easy control logic without extra microcontroller. For front lights, Model TPS92602 offers 2-channel switching. Device supports both linear...

Read More »
How to Effectively and Efficiently Clean Heat Exchangers, Part I
Sponsored

How to Effectively and Efficiently Clean Heat Exchangers, Part I

For refineries and petrochemical plants, cleaning heat exchangers is a dirty job but somebody has to do it. While there are many approaches on how to clean shell and tube heat exchangers, it is indisputable that the right method is absolutely critical for ensuring that equipment is fully operational. Otherwise, you could end up with a potential equipment shutdown, which will cost you time and money. In this three-part series, you will learn about the various benefits, methods, and obstacles involved in heat exchanger cleaning. Part one introduces the fundamentals of cleaning, as well as explores the pros and cons of on-site versus off-site services. Download the first of this three series to assist you in finding the best solution for your dirty job here.

Read More »
LED Drivers are designed for use in hazardous location fixtures.
Construction Equipment and Supplies

LED Drivers are designed for use in hazardous location fixtures.

Available in constant-current, dimming, and constant-voltage versions, LED25W-HL (25 W) and LED40W-HL (40 W) carry Type HL rating from UL and IP66 rating for dry and damp locations. Both come in V5A cases, feature internal thermal protection, and offer option of leads that exit through bottom or side. Other features include 100–277 V universal input, Black Magic Thermal Advantage™ plastic...

Read More »
N-Channel MOSFET (150 V) comes in 2 x 2 mm package.
Construction Equipment and Supplies

N-Channel MOSFET (150 V) comes in 2 x 2 mm package.

Supplied in thermally enhanced PowerPAK® SC-70 package with 2 x 2 mm footprint, Vishay Siliconix SiA446DJ 150 V n-channel MOSFET increases efficiency in space-constrained applications by reducing conduction and switching losses. RoHS-compliant, halogen-free, and 100% RG- and UIS-tested product, built on ThunderFET® technology, offers low max on-resistance of 177 mΩ at 10 V, 185 mΩ at 7.5 V,...

Read More »
Construction Equipment and Supplies

MOSFET Driver extends run times of battery-powered products.

Designed to address wide variety of applications including motor drives, UPS, and DC/AC inverters, 85 V MIC4605 Half-Bridge MOSFET Driver features adaptive-dead-time circuitry, which actively monitors half bridge to minimize time between high and low side MOSFET transitions. Anti-shoot-through circuitry prevents erroneous inputs and noise from turning both MOSFETs on at same time. Applications...

Read More »
Construction Equipment and Supplies

LED Remote Power Drivers promote system design flexibility.

Combining digital power conversion, constant current drivers, and dimming control into one intelligent LED power supply, Trinity™ 3-in-1 platform enhances flexibility in lighting applications where 0–10 V controls are common but only small numbers of LED fixtures are grouped together on one switch. Analog remote power drivers, with as many control zones as power channels, can power and...

Read More »
Construction Equipment and Supplies

Power Conversion Driver/MOSFET works with high-performance FPGAs.

Model ET4040 monolithic 40A driver plus synchronous MOSFET powertrain enables design of point-of-load power solutions. It provides continuous output current over -40 to + 85°C temperature range and input from 4.5-14 V. On-board monolithic current sense maximizes reliability and thermal performance. Powering FPGA core supply rails in single- or multi-phase configurations, unit also suits VDDQ...

Read More »

IXYS Integrated Circuits Division Offers New Dual IGBT Gate Driver
Construction Equipment and Supplies

IXYS Integrated Circuits Division Offers New Dual IGBT Gate Driver

The IX2204 is also well suited for driving SiC MOSFETs Beverly, Massachusetts, USA – IXYS Integrated Circuits Division (ICD), (NASDAQ: IXYS), announced the availability of the IX2204 Dual IGBT Gate Driver. The IX2204 features two high current outputs, each capable of sourcing 2A and sinking 4A. Manufactured on IXYS ICD's advanced BCDMOS Silicon on Insulator (SOI) process, the IX2204 outputs...

Read More »
Simple Connection - MGB with EtherNet/IP
Sponsored

Simple Connection - MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics