Electronic Drivers

Power Line Driver complies with global regulatory standards.
Electronic Drivers

Power Line Driver complies with global regulatory standards.

Housed in 4 x 4 x 1 mm QFN package, Model NCS5650 is designed for Power Line Carrier communications applications, such as smart metering. Output stage can drive up to 2.0 A peak into isolation transformer or simple coil coupling to mains. At output current of 1.5 A, output voltage swings within 1.0 V or less on either rail, ensuring optimal SNR in harsh environments. Drawing 150 Â-µA in...

Read More »
Electronic Drivers

DC-DC Converter powers and backlights 5-10 in. LCD displays.

Housed in 4 x 4 mm TQFN package, Model AAT2822 combines triple-output DC/DC converter, 28 V WLED backlight driver, and VCOM buffer, providing regulated voltages required by active-matrix TFT LCDs. Backlight driver supports serial and parallel configured LED strings and delivers up to 260 mA of continuous current. Equipped with built-in supply sequencing and fault detection to prevent damage to...

Read More »
Electronic Drivers

Fade-in/Fade-Out, 4-Channel Backlight Driver employs 2 LDOs.

Able to drive 4 white LEDs at 124 mA total from 2.7-5.5 V input, AAT2869 constant-frequency (0.9 MHz) charge pump DC/DC converter uses dual-mode load switch (1x) and fractional (1.5x) conversion to maximize efficiency. External parts consist of two 1 Â-µF flying capacitors and two 1 µF capacitors at IN and OUTCP. Along with fade-in/fade-out feature for backlight turn-on/-off, IC...

Read More »
Electronic Drivers

White LED Backlight Driver integrates direct PWM dimming.

Capable of driving 4 LED strings or up to 44 LEDs at 120 mA total LED current, AAT1405 is optimized for notebook PCs, monitors, and portable TVs. PWM frequency of 100 kHz ensures silent operation, and soft-start minimizes inrush current. Operating from -40 to +85°C, IC has 4.5-26 Vdc input range and exhibits up to 92% efficiency. Other features include boost converter and up to 4 LED...

Read More »
AC/DC Isolated Power Supply drives LED light fixtures.
Electronic Drivers

AC/DC Isolated Power Supply drives LED light fixtures.

Able to support 5-16 LEDs, LXMG221W-0700034-D0 provides optimized power conversion and light management for solid state lighting fixtures. Class 2 isolated unit operates from 90-305 Vac, 50 and 60 Hz, and provides 90% peak efficiency while delivering non-flickering dimming down to 10%. Supplied in IP66-rated plastic package, product delivers constant current single string output of 700 mA and...

Read More »
Electronic Drivers

GN1411

Overview The GN1411 is an integrated bi-directional DFB/FP laser driver and limiting amplifier for sub-1-Watt SFP+ optical module applications at data rates up to 11.3Gb/s. Features/Highlights 11.3Gb/s DML driver Integrated Limiting Amplifier Integrated APC loop Key Applications 11G DFB/FP based SFP+ optical modules 6G DFB/FP based SFP+ optical modules Ordering Information Part Number Package...

Read More »
High-Voltage HB LED Driver targets automotive applications.
Electronic Drivers

High-Voltage HB LED Driver targets automotive applications.

Model MAX16833 for boost, buck-boost, and buck configurations can sustain battery load-dump peaks up to 65 V. It provides single-wire connection to LEDs and includes high-side dimming p-channel MOSFET driver and current-sense amplifier that detect short-circuits, with protection between output and ground, and input and output. Frequency dithering is included on MAX16833, while MAX16833B has...

Read More »
Electronic Drivers

White LED Flash Driver minimizes battery current draw.

Model ADP1650 features programmable IÂ-²C-compatible interface, programmable torch and flash currents for one LED up to 1,500 mA, and two independent TxMASK1 inputs. Measuring 2 x 1.5 mm, it also integrates programmable 1.5 or 3.0 MHz synchronous inductive boost converter, 1 µH power inductor, and 0603 case-size input and output capacitor. Unit provides efficiency at 85% at typical...

Read More »
LED Lamp Driver ICs are AEC-Q100 compliant.
Electronic Drivers

LED Lamp Driver ICs are AEC-Q100 compliant.

Available in RoHS-compliant TSSOPs, AT9917 and AT9932 are designed for solid-state lighting applications in automobiles. Model AT9917 uses peak current mode control scheme and includes internal transconductance amplifier as well as fault output. Featuring feed forward current control scheme, AT9932 is minimally susceptible to input voltage transients. It maintains constant output current, even...

Read More »
Electronic Drivers

Gate Driver ICs drive power MOSFETs and IGBTs.

Operating with supply voltages from 4.5-35 V, dual-channel IXD_604 Series is specified over automotive temperature range of -40 to +125°C. Each of 2 outputs can source and sink 4 A of peak current while producing rise and fall times of less than 10 ns. Input of each driver is virtually immune to latch-up, and proprietary circuitry eliminates cross conduction and current shoot-through.

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers