Electronic Drivers

Open Frame AC LED Drivers deliver 60 W in 4 x 2 x 1 in. package.
Electronic Drivers

Open Frame AC LED Drivers deliver 60 W in 4 x 2 x 1 in. package.

Available in 5 different models, 60 W Series RACD60 meets needs of any lighting system from 700 mA to 4.2 A. Output current can be adjusted with internal potentiometer to match any non-standard requirements. With efficiencies up to 89% and built-in power factor correction of greater than 0.9, drivers operate at ambient temperature range of -25 to +60°C without derating. Products are fully...

Read More »
Multimodal LED Driver suits coin cell-powered backlighting.
Electronic Drivers

Multimodal LED Driver suits coin cell-powered backlighting.

Supplied in 3 x 3 x 0.8 mm package, CAT3661 single-channel Quad-Mode(TM) LED Driver supports 2.0-5.5 V inputs, can drive one LED backlight with up to 5 mA current, and achieves 92% peak efficiency. Soft-start current limiting and short-circuit protection enable use in equipment powered by coin cell batteries, while low-noise input ripple and constant switching frequency allow use of small...

Read More »
Laser Diode Driver operates on +5 V power.
Electronic Drivers

Laser Diode Driver operates on +5 V power.

Model 762 OEM laser diode driver provides up to 2.5 A of drive current with compliance voltages up to 2.5 V, while pulse widths down to 20 nsec or less are possible with optical pulse rise times of 10 nsec. System board, which includes FPGA and bidirectional PID thermoelectric cooler controller, provides sensing for back facet monitor and outputs digital laser fire indicator pulse and scaled...

Read More »
Electronic Drivers

Avago Technologies Stresses IGBT Protection in New Isolated Gate Drivers

Designed for Power Inverter and Motor Control Applications SAN JOSE, Calif., and SINGAPORE, July 20, 2010 - Avago Technologies (Nasdaq: AVGO), a leading supplier of analog interface components for communications, industrial and consumer applications, today announced the 2.5 A peak-output drive ACPL-H342 and ACPL-K342 optically isolated IGBT gate drivers that feature a built-in Miller clamp,...

Read More »
LED Driver ICs deliver flicker-free TRIAC dimming.
Electronic Drivers

LED Driver ICs deliver flicker-free TRIAC dimming.

Respectively optimized for isolated and non-isolated systems, LinkSwitch®-PH and -PL, deliver flicker-free monotonic TRIAC dimming. Integrated single-stage PFC enables solid state lighting luminaires to achieve PF greater than 0.9. PH devices incorporate primary-side-control technology, and integration of PL into designs can reduce component count. Monolithic solutions incorporate...

Read More »
Electronic Drivers

LED Driver offers 15-bit control resolution for smooth dimming.

Targeted at lighting applications that use large number of low-power LEDs and meet UL Class 2 requirements, ballast-style LINEARdrive DC 100 can be integrated in network or used as standlone device. DMX and 0-10 V compatible driver measures 153 x 50 x 23 mm and is configured via intuitive, 3-button user interface with display. Driven at 12 V, LINEARdrive handles max load for connected LED strips...

Read More »
Electronic Drivers

Low-Power SATA Redriver/Equalizer handles 6 Gbps data rates.

Dual-channel, single-lane SN75LVCP601 reconditions and drives high-speed signals that propagate over longer distances, enabling optimal performance for SATA drives of any speed (1.5/3.0/6.0 Gbps) without changing equalization or de-emphasis channel settings. Supplied in 20-pin QFN package, product offers selectable equalization, de-emphasis, and integrated output squelch. Max active power...

Read More »
Electronic Drivers

Synchronous MOSFET Controller raises AC/DC converter efficacy.

Comprised of differential amplifier detector and high current driver in SO8 package, ZXGD3103N8 drives MOSFET in place of Schottky diode in secondary side of flyback and resonant converters. It monitors MOSFET reverse voltage and applies positive turn-on voltage to gate if body diode conduction is detected. Characteristics include 10 mV typ detector threshold voltage, respective turn-off...

Read More »
Electronic Drivers

LED Driver provides continuous, 1% dimming for LED fixtures.

Available in compact and stick form factors, Hi-lume® A-Series supports constant-current and constant-voltage outputs over wide range of current and voltage levels for driving LED loads up to 40 W. Unit features precision microprocessor control and integral thermal management. Operating from 120-277 V input, driver installs into new construction or existing spaces, and works with ELV...

Read More »
Electronic Drivers

Multi-String Backlight LED Drivers optimize screen display.

Offering boost converters and precision current sinks that support up to 88 LEDs at 360 mA total LED current, models AAT1409/7/5 drive high-brightness LEDs and ensure uniformity across display by controlling backlight intensity. Each is designed for driving white LED (WLED) edge backlighting for 10-22 in. LCD panels and offers up to 92% efficiency over 4.5-26.0 V input range. Available in 8-, 6-,...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers