Electronic Drivers

STMicroelectronics Raises Reliability and Efficiency for Ultra-Compact LED Lamps
Electronic Drivers

STMicroelectronics Raises Reliability and Efficiency for Ultra-Compact LED Lamps

Primary-side regulation IC combines improved high-voltage integration and ultra-efficient operation for extremely accurate LED-lighting control Geneva -The first in a new family of mains-operated LED lamp drivers from STMicroelectronics (NYSE: STM), a global leader serving customers across the spectrum of electronics applications and the worldwide leader in ICs for electronic lighting control,...

Read More »
Electronic Drivers

Line Driver IC delivers IO-Link functionality.

Meeting physical layer requirements of sensor and actuator systems used in factory automation, ZIOL2201 high-voltage I/O channel comes in 4 x 4 mm QFN24 package with exposed die paddle and is available with smart power functionality. Integrated DC/DC converter allows power supply of external sensor and actuators with up to 15 V. Fully programmable from slew rate and current settings to various...

Read More »
Electronic Drivers

LED Driver offers 4-channel grouped delay.

With input voltage range of 3.0-5.5 V and LED channel voltage up to 17 V, Model TLC59282 minimizes simultaneous switching noise by staggering switching of LED outputs, facilitating 2-layer PCB routing in LED modules. Serial-controlled, 16-channel, constant-current sink LED driver features channel-to-channel current accuracy of ±0.6% and chip-to-chip current accuracy of ±1%. Device is...

Read More »
Electronic Drivers

LED Driver Board promotes flexibility for display integrators.

Eliminating need for multiple specific driver boards, H-IQ fully software-customizable, constant current LED driver board has embedded programmable controller. It lets integrators create LED solutions for displays from as small as 4.3 in. to beyond 19 in. with brightness levels from low level NVIS to beyond sunlight readable. Controller fosters integration with Software design/control system and...

Read More »
LED Driver ICs achieve up to 88% efficiency.
Electronic Drivers

LED Driver ICs achieve up to 88% efficiency.

Optimized for industrial and commercial lighting settings, LinkSwitch-PH LNK413-LNK419 ICs operate at input voltages up to 305 Vac and are suitable for applications ranging from 3 W bulbs to 55 W replacements for fluorescent lighting fixtures. Units incorporate 725 V MOSFET and MOSFET driver as well as PWM-dimmable single-stage controller with both power factor correction and constant current...

Read More »
Electronic Drivers

LED Driver enables drop-in replacements for halogen MR16 lamps.

Enabling design of retrofit LED lamps that can replace halogen MR16s without any changes to existing electrical infrastructure, MAX16840 employs architecture that ensures flicker-free, dimmable operation with electronic transformers and cut-angle dimmers. Product can also be designed without electrolytic capacitors, extending lifetime of LED lamp, and delivers up to 20 W of power. It is specified...

Read More »
AC-DC LED Driver Power Supplies offer 0-10 V dimming control.
Electronic Drivers

AC-DC LED Driver Power Supplies offer 0-10 V dimming control.

Featuring 3.35 x 2.13 x 1.28 in. form factor, 16.8 W Series LD015D is fully potted and suitable for dry and damp locations. Units offer input voltage of 110 or 230 Vac, DC output from 8-48 Vdc, and wide selection of pre-adjusted constant current outputs. Operating from -20 to +60°C, RoHS-compliant power supplies are phase dimmable, compatible with standard triac and electronic low voltage...

Read More »
Current Sink LED Backlight Drivers minimize component count.
Electronic Drivers

Current Sink LED Backlight Drivers minimize component count.

Intended for high-end handheld displays, SC667 and SC668 can replace boost converters and charge pumps in high-end handhelds while providing display backlighting. Both incorporate smart Automatic Dropout Prevention (ADP) technology, which enables automatic and simultaneous monitoring of each current sink to avoid dropout as system loads turn on and off. While SC668 provides 8 current sinks, SC667...

Read More »
LED Driver IC provides ±3% accurate LED current.
Electronic Drivers

LED Driver IC provides ±3% accurate LED current.

Operating in constant off-time mode, Model HV9967 includes 60 V, 0.8 W MOSFET that can be used as stand-alone buck converter, or connected as source driver output for driving external MOSFET to operate at offline AC line voltages. Open loop LED driver IC utilizes average-mode current control, which does not produce peak-to-average error. Housed in 8-lead MSOP package, IC includes internal...

Read More »
Electronic Drivers

PMIC and FET Driver increases efficiency of power supplies.

Addressing needs of standard and logic-level N-channel MOSFETs, 600 kHz UCC24610 Green Rectifier(TM) comes in 8-pin, 5 x 6 mm SOIC package and is used for low-voltage, secondary-side synchronous rectification. IC improves power supply efficiency by as much as 5% and reduces primary-side power loss in 5 V AC/DC adapters and bias supplies. Efficiency optimization features include micro-sleep...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics