Electronic Drivers

High-Efficiency LED Drivers serve 19-27 in. industrial LCDs.
Electronic Drivers

High-Efficiency LED Drivers serve 19-27 in. industrial LCDs.

With 34.3 x 127 mm footprint and 12 mm profile,Â- SFDZ Series driver provides 180 mA max per string to LED backlights. It provides 40 W (20 W per side) output and powers up to 8 LED strings (4 per side). With 34.3 x 127 mm footprint and profile under 14 mm, SFDQ Series driver provides 140 mA max per string to LED backlights. It provides total output power of 30 W and powers up to 4...

Read More »
Electronic Drivers

Flash LED Drivers limit battery load in smartphones, tablets.

Model ADP1660 is dual 750 mA flash LED driver available in 2.0 x 1.6 mm, 12-ball WLCSP package, while ADP1649 single 1,000 mA LED driver comes in 2.0 x 1.5 mm, 12-ball WLCSP package. Both feature IÂ-²C communication ports and 1.5 or 3 MHz synchronous inductive boost converter enabling use of 1-µH power inductor and 0603 case-size input and output capacitor. Units also have Tx masking...

Read More »
Isolated PV MOSFET Driver integrates turn-off circuitry.
Electronic Drivers

Isolated PV MOSFET Driver integrates turn-off circuitry.

Supplied in SOP-4 SMT package that measures 6.95 x 4.92 x 2.12 mm, VOM1271 photovoltaic (PV) MOSFET driver is optimized for high-side MOSFET drivers, isolated solenoid drivers, and custom SSRs in such end products as industrial and automatic test equipment systems. Optical coupling provides isolation test voltage of 4,500 VRMS, and other features include open circuit voltage of up to 8.8 V typ...

Read More »
Electronic Drivers

DC/DC Buck Converter LED Driver can operate with fixed frequency.

Model TPS92510 is 1.5 A constant current DC/DC buck converter with 3.5-60 V input voltage operating range and PWM dimming with input from 100 Hz to 1 kHz. Product has synchronizable, fixed switching frequency from 100 kHz to 2.5 MHz. Low-power/thermal shutdown and LED open circuit protection are included, while thermal foldback ensures some light output remains in over-temperature condition....

Read More »
Electronic Drivers

External LED Driver delivers 12 W of power.

Packaged as fixed-prong wall-plug adapter, Model PDA012A-S is available in constant current outputs of 350, 700, 1,000, and 1,500 mA, making it suited for OEM lighting applications, such as floor lamps, table lamps, and cabinet lighting. Unit features nominal input range of 110–120 Vac, Level V efficiency compliance, and no-load power draw of 300 mW. Measuring 71.5 x 33.75 x 46 mm, IP20-rated...

Read More »
Electronic Drivers

ON Semiconductor Supports PCI Express Applications with New Clock and Data, Switching and Protection Devices

New fanout buffers, differential switches and flow-through ESD protection devices demonstrate ON Semiconductor's PCIe 3.0 technologies for server, networking and ATE applications PHOENIX, Ariz. - ON Semiconductor (Nasdaq: ONNN) a premier supplier of high performance silicon solutions for energy efficient electronics, has introduced a range of new components that significantly strengthens its...

Read More »
Electronic Drivers

Full-Bridge MOSFET Pre-Driver IC suits portable applications.

Targeting high-current brush DC motors in portable applications, A4957 hasÂ- 7–50 V supply range and comes in 24 lead ES package with bootstrap charge management system. Charge pump regulator provides greater than 10 V gate drive for supply voltages down to 7 V, and bootstrap capacitor provides battery supply voltage required for N-channel power MOSFETs. Each power MOSFET is...

Read More »
Electronic Drivers

PWM Controllers feature space saving design.

Housed in 8-lead, 3 x 3 mm DFN package, Model APE3061GN3-HF-3 supports input voltages from 3–24 V and is designed to drive external N-channel MOSFET. Output voltage is dependent on external N-MOSFET and is programmable using internal reference voltage of 1.0 V and external resistors connected as voltage divider. Using copper wire for internal wire bonding, Model APE3061AM-HF-3 supports input...

Read More »
Electronic Drivers

24V Line Drivers with Impedance Adaption for Industrial Encoder Applications

Single and differential RS422 line driver for 4.5V to 35V power supply The integrated devices iC-HD2, iC-HD7 and iC-HE are line drivers for 5 V and 24 V industrial encoder/sensor applications. The output drivers are designed for cable impedances in the range of 30 to 140 Ohms. Due to the unique integrated wave impedance adaption, reflected signals coming from the non-terminated line end at the...

Read More »
Electronic Drivers

Pockels Cell Driver suits military Q-switched laser systems.

Measuring less than 1.7 in.Â-³ and weighing 20 g, Model PCD-3-20 will operate from -40 to 70°C, as specified by U.S. military. Unit has rise time of less than 20 ns into 30 pF, with 25 ns propagation delay. Operating from 12 V input, 3 kV device draws about 30 mA of current. Onboard potentiometer allows user to trim output voltage, while specially designed output stage...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers