Electronic Drivers

Electronic Drivers

LED Driver offers multiple dimming options.

Supplied in QFN-16 package with Pb-free pure-tin plating and flammability rating of UL 94V-0, PA5711 offers such dimming options as PWM, Linear Dimming, Motion Detection, and Light Sense control inputs. Direct gate driver control is available through active high enable pin, and internal oscillator frequency can be set externally through resistor. Allowing leading edge blanking with desired delay...

Read More »
Electronic Drivers

Two-Channel LED Drivers are suited for use with high-CRI lamps.

Providing color control for 2-color LED light engines, MSL2021/23/24 two-channel SSL LED drivers can be accompanied with Atmel AVR® MCU or ARM® processor-based MCU. Each model drives one dominant LED string withÂ- linear controller and one color LED string with low-side buck controller to achieve target CCT coordinate and replicate color spectrum to attain high...

Read More »
Electronic Drivers

LED Controller and Driver facilitate retrofit bulb design.

Offered in 6-pin TSOT package measuring 2.9 x 2.9 mm, Model TPS92075 is designed for phase-dimmable, offline AC/DC LED lamp and downlight applications such as E14, GU10, A19, and PAR20/30/38 bulbs. Constant-current lighting controller achieves power factor correction above 0.9 while delivering flicker-free dimming when used with conventional wall dimmers. Supplied in 10-pin PowerPad™ MSOP...

Read More »
Electronic Drivers

IC Coupler drives middle-capacity IGBT or power MOSFET.

Housed in SO6 package, Model TLP152 consists of GaAlAs infrared LED optically coupled to high-gain photodetector IC chip. Unit achieves low output current of 2.5 A and contributes to low-power consumption with operating power supply voltage of 10–30 V. With guaranteed minimum creepage and clearance distances of 5 mm and internal insulation thickness of 0.4 mm, Model TLP152Â- is suited for...

Read More »
Electronic Drivers

TRIAC Dimmable LED Driver IC serves retrofit applications.

Flicker-Free™ IS31LT3935 solid state lighting (SSL) LED controller featuresÂ- dimming core based on AccuDim™ technology, which makes LED retrofit lamps have monotonic dimming profile across entire dimming range. With 100% compatibility with leading edge, trailing edge, and digital TRIAC dimmers, single-stage current mode LED controller comes in 3 x 3 mm DFN-10 package with exposed pad...

Read More »
Electronic Drivers

AC/DC LED Driver IC targets general lighting applications.

With operating voltage from 85–265 Vac, PFC greater than 0.95, and current accuracy of ±3%, Model IS31LT3916 is suited for lighting fixture designs which meet UL compliance for galvanic isolation. Fixed-frequency, peak current mode controller delivers accurate current regulation at constant power to LED load. Housed in RoHS-compliant MSOP-8 package, device includesÂ- soft-start, Vcc...

Read More »
Programmable LED Drivers provide universal adaptability.
Electronic Drivers

Programmable LED Drivers provide universal adaptability.

Available with either AC or DC power inputs, MESO series works with most LED loads and offers less than 20% THD, greater than 0.9% PF, and input range of 90–305 Vac. Each model is available in slim plastic package with flying leads or metal ballast style case with side and bottom terminal blocks. Programming interface enables designers and assembly lines toÂ- customize LED drive current...

Read More »
Laser Driver connects directly to butterfly laser packages.
Electronic Drivers

Laser Driver connects directly to butterfly laser packages.

Suited for OEM use in laser systems, T165 Laser Pulser incorporates edge triggered pulse generator with 150 psec nominal rise and fall times intoÂ- butterfly or TO-packaged laser. Laser current, bias, and pulse widths can be set via onboard trimpots or external analog inputs. Edge-triggered pulse generator is adjustable from 200 psec to 2 nsec, and pulsed...

Read More »
Constant-Current LED Driver is AEC-Q100 qualified.
Electronic Drivers

Constant-Current LED Driver is AEC-Q100 qualified.

Integrating high-side, N-channel MOSFET switch, Model A6213 provides constant-current output up to 3 A to drive high-power LEDs. Output voltage automatically adjusts to optimize constant-current supply to variety of LED array configurations including multiple LEDs in series. LED dimming is accomplished via direct logic input PWM signal. Housed in 8-pin narrow SOIC package, IC is suited for...

Read More »
Archilume Series of LED Drivers Provide Super-Slim Form Factor with Extra Wide Range Dimming for Elegant Illumination
Electronic Drivers

Archilume Series of LED Drivers Provide Super-Slim Form Factor with Extra Wide Range Dimming for Elegant Illumination

Endicott, NY - The ArchiLume Series of LED drivers from ERG Lighting has the slimmest 100W drivers on the market for illumination applications requiring an elegant look with smooth, flicker-free dimming and constant voltage output up to 100 watts with very low ripple. They are ideal for applications such as architectural (office, hospitality, commercial, institutional), high-end retail (in-store...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers