Electronic Drivers

Electronic Drivers

LED Drivers include built-in step dimming function.

Covering DC output range of 12–57 Vdc, GP-LP060P Series includes 6 models thatÂ- deliver up to 60 W of power and include 2-stage active PFC. Step dimming function for constant current and constant voltage can be controlled through AC power switch. With power conversion efficiency up to 86%, drivers offer AC input range of 90–305 Vac or DC input from 127–430 Vdc. Units...

Read More »
Electronic Drivers

MOSFET Controller IC suits applications with >10 A load.

Designed for PWM current control of 3-phase brushless DC motors, Model A4915 is capable of high current gate drive forÂ- N-channel power MOSFETs. Internal charge pump ensures gate drive down to 7 V supply and provides limited gate drive down to 5 V, while bootstrap capacitor generates supply voltage greater than source voltage of high side MOSFET. Offered in 28-pin TSSOP or 28-contact 5 x 5...

Read More »
Electronic Drivers

GlacialTech to Showcase Its Latest LED Lights and Drivers at the 18th Guangzhou International Lighting Exhibition

Taipei, Taiwan – GlacialTech, a Taiwanese technology manufacturer, extends an invitation to all business and media partners around the world to attend their display of LED lights and drivers of its subdivisions, GlacialLight and GlacialPower, at the 18th Guangzhou International Lighting Exhibition (Hall 11.2, Booth #B10). The exhibition will be held at China Import and Export Fair Complex in...

Read More »
Electronic Drivers

Automotive LED Drivers support dashboard applications.

Featuring 40 V rating on all outputs, Models TLC6C598-Q1 and TLC6C5912-Q1 are monolithic, medium-voltage 8-bit/12-bit shift registers designed for systems that require relatively moderate load power, such as LEDs. Model TLC6C598-Q1 can power up to 8 strings of LEDs, while Model TLC6C5912-Q1Â- can power up to 12 strings of LEDs directly connected to automotive battery. Both offer thermal...

Read More »
LED Drivers target variable voltage LED lights.
Electronic Drivers

LED Drivers target variable voltage LED lights.

Featuring constant current design with buck-boost topology, 10.8 W Model GP-LD10-30C and 17.5 W Model GP-LD15-24C have auto input voltage detectors for 12 or 24 V input. Reverse Protection prevents damage caused by accidentally connecting power lines in reverse by automatically disconnecting current. With IP65 design, drivers are protected from ingress of dust and water. Units operate at...

Read More »
Electronic Drivers

LED Drivers are designed for variable voltage lights.

Featuring constant current design with buck-boost topology, GP-LD10-30C and GP-LD15-24C can be used on vessels/vehicles, with power sources with fluctuating voltage, as well as with solar panels for LED luminance. These IP65-rated drivers, with universalÂ- 11–15 Vdc and 22–30 Vdc input ranges, automatically detect 12 or 24 V input and come with integrated UVLO, short-circuit,...

Read More »
Two-Channel CW Laser Diode Driver features MCU interface.
Electronic Drivers

Two-Channel CW Laser Diode Driver features MCU interface.

Supplied in 5 x 5 mm, 28-pin QFN package and operating from 2.8–8 V supply, iC-HT permits MCU-based activation of laser diodes in CW mode. Laser diodesÂ- can be driven by optical output power using APC; laser diode current using ACC; or full, controller-based power control unit. Max laser diode current per channel is 750 mA, and both channels can be switched in parallel for laser...

Read More »
Electronic Drivers

LED Drivers suit commercial area lighting, LED-based projection.

WithÂ- I²C interface and one-time programmable ROM, TPS92660, 80 V input, 2-string LED driver consists of one DC/DC buck regulator and one linear channel for 2-color LED mixing. Analog or PWM input signals can be used for brightness/color adjustment. As 85 V input, adjustable frequency, synchronous buck DC/DC LED controllers, TPS92640 and TPS92641 offer analog...

Read More »
Electronic Drivers

LED Drivers offer power conversion efficiency of 85%.

With 90~264 Vac input andÂ- output voltage of 12 or 24 Vdc, Model GP-LE036N delivers up to 36 W of power, while Model GP-LE060N provides up to 60 W. Units feature built-in constant voltage design and provide protection against over temperature, overload, short circuit, and over voltage. Housed in IP67-rated, fully isolated casing, drivers are suitable for LED light...

Read More »
Waterproof LED Drivers have input voltage up to 277 Vac.
Electronic Drivers

Waterproof LED Drivers have input voltage up to 277 Vac.

Featuring input voltage range of 120–277 Vac, PDA040W series waterproof LED drivers with dimming and PDA040B without dimming are available in constant-current outputs of 700, 1,050, and 1,400 mA. Units operate over temperature range of -40°C to over +80°C and have overvoltage, overcurrent, and short-circuit protection. Power factor correction is greater than 0.9 and total harmonic...

Read More »

All Topics