New IMAGEVK-74 mmWave Imaging and Sensing Development Kit Features Flexible Operation within 62 to 69 GHz Band
Comprises with high-performance transceiver chip with entire mmWave front-end and analog baseband signal chain for up to 40 antennas. Features pre-configured profiles to adjust receiver resolution and imaging processing time. Ideal for industrial IoT, robotics, smart homes, motion and obstacle detection, vehicular operator and passenger detection and medical patient monitoring applications.
Read More »
New Tunnel Diode Detectors Available in Positive and Negative Video Output Polarities
Operates over octave and broadband frequencies ranging from 100 MHz to 26 GHz. Exhibit a flat video output response across wide frequency bands over a maximum temperature range of -65°C to +115°C. Ideal for military and commercial radar, aerospace and defense, SATCOM, test and measurement applications.
Read More »
New Ground Fault Sensor from NK Technologies Provide Ample Space for Multiple Conductors
Applications include water treatment and delivery, generators and monitoring large machines. Provides ample space for multiple conductors up to 800 amps through a single sensing ring. Compatible with most automation and control systems.
Read More »
Pasternack Offers Tunnel Diode Detectors with Frequencies Ranging from 100 MHz to 26 GHz
Available in 26 models with Germanium planar construction and suitable for aerospace and defense, military and commercial radar, test and measurement and SATCOM applications. Can be operated from -65°C to +115°C temperature range and compliant to RoHS and REACH standards. Features pulse response risetime of 5 nsec typical with maximum input power handling of +17 dBm.
Read More »
Accelerating Composites Production with Dielectric Cure Monitoring
This white paper provides an in-depth explanation of how dielectric monitoring works, and why it's the best choice for any company working with advanced composite materials.
Read More »
Monitoring Mold Deformations in Aluminum Die-Casting
Inductive eddyNCDT displacement sensors (eddy current) are used to monitor gaps in aluminum die-casting processes. These precision sensors from Micro-Epsilon increase the service life of the tools involved and product quality, while rejects and expenses are reduced. Their robust sensor design also enables gap measurements in harsh ambient conditions. In the production of aluminum die-cast parts,...
Read More »
ACEINNA Presents MCx1101 Family Current Sensors for Industrial and Power Supply Applications
Available in ±5A, ±20A, and ±50A models in fixed gain (MCA1101) and ratiometric gain versions (MCR1101). Offers an integrated over current detection flag and an over current detection response time of 0.2 us. Certified to UL/IEC/EN standards and are packaged in SOIC-16 package with 0.9 mΩ current path.
Read More »
New DT-BB Series DC Current Transducer is Offered in Split-Core Case
The DT-BB Series DC Current Transducer is rated to measure DC current at working voltage to 1500 VDC. The device features 4–20 mA unipolar or 4–12–20 mA bipolar, ± 5 or ± 10 VDC bidirectional, and 0–5/10 VDC unipolar or 0–2.5–5 VDC or 0–5–10 VDC bipolar outputs. It is suitable for measuring PV solar power and monitoring DC motor that include sensing clogged filters or blocked...
Read More »
NK Technologies Presents AT/ATR-TH Series Current Transducer in Triple-Aperture Solid-Core Design
The AT/ATR-TH Series Current Transducer is designed for monitoring three-phase loads, motors, machines, and buildings. The device can detect open discharge lines, clogged filters, or blocked intake to pumps in water delivery and treatment systems and over/under current conditions. It is powered externally with 24 VAC or DC (22–18V) and provides a choice of 0–10 to 0–200 A. The sensor mounts...
Read More »
New AGT-FD Ground Fault Sensor is Suitable for Measuring Earth Leakage Current
The AGT-FD Ground Fault Sensor from NK Technologies detects faults to earth from 0 mA to 100 mA and produces an output signal of 0–10 VDC in proportion to the current passing to ground. The unit can be used for measuring and monitoring any low-value AC circuit current. It is suitable for applications such as electric heating processes, AC motor loads, semiconductor wafer fabrication, plastic...
Read More »
New BES R01 Inductive Flatpack Sensors Feature Polyphenylene Sulfide Sensing Surface
Balluff’s BES R01 Inductive Flatpack Sensors are designed for use in hostile conditions of welding environments. Units feature die-cast zinc housing and high-temp silicone cable jacket that protects conductors from weld-spatter burn through. The sensors come with weld-field immune option, which provides stable operation near electrical welding currents. Fortron PPS sensing face enables plant...
Read More »
DoorKing Releases Advanced Long Range Card Reader System with Frequency Hopping Technology
The DoorKing DKS AVI system is at the cutting edge of automotive security technology and represents a leap forward in engineering innovation. When it comes to long-range passive card readers, we lead the industry and set the standard for quality and performance. To find out why the DoorKing DKS AVI system is taking the automotive security industry by storm, see our video.
Read More »
