Siemens Receives Order for Steam Turbine-Generator from England - Delivery Scheduled in a Mere 13 Months
Siemens Energy has received a follow-up order for the supply of an SST-400 steam turbine-generator as an extension to the turbine building in the chemical industrial park in Wilton, UK. Purchaser is the park operator Sembcorp UK. The turbine with generator and auxiliary systems is scheduled to leave the Siemens turbine factory in Görlitz after only 13 months. The SST-400 industrial steam turbine...
Read More »Gas Generator Set suits combined heat and power applications.
Driven by Cat electronically controlled, lean-burn gaseous-fueled reciprocating engine, Model G3512E delivers up to 41.7% ISO electrical efficiency without water pumps. Unit operates at 50 Hz/1,500 rpm with Miller Combustion Cycle, is rated at 1,000 ekW, and has standard NOx emissions rating of 500 mg/MM3 at separate circuit aftercooler inlet water temperature of 54-
Read More »
Engine Driven Welder Generator delivers 12 kW of power.
Available with CAT, Perkins, or Deutz diesel engines, Big Blue-® 300 Pro CC/CV provides 20-410 A CC/DC and 14-40 V CV/DC welding output, with arc stability in TIG, Stick, MIG, flux cored, and carbon arc gouging processes. Circuit board is protected by Vault, hermetically sealed aluminum case that is impenetrable to dust, salt, and moisture. Rated for high temperatures up to 104-
Read More »
Welder/Generator/Air Compressor includes battery charger.
Available with internal 12/24 V battery charger and jump starter, Trailblazer-® 302 Air Pak(TM) welds at up to 350 A, and provides 13,000 W of Accu-Rated(TM) generator power, 26 cfm compressed air, and 450 A of battery jumping power. Charger delivers power until it senses load from starter to eliminate battery failure. Driven by 30 hp Kohler gas engine, 59-½ x 20 x 34-¼ in. welder provides...
Read More »
How to Select the Right Sprocket for Your Application
This ebook provides overview on how to select the right sprocket.
Read More »Terex AWP Sells Terex Generator Product Line to Cummins Power Generation
REDMOND, WASH. - The Terex Aerial Work Platforms (AWP) segment of Terex Corporation (NYSE:TEX) announced today that it has exited the generator business as part of an overall strategic plan to focus on its core aerial equipment business. As a result, Terex AWP has sold the Terex-® generator product line to Cummins Power Generation for an undisclosed amount. At this point in time, it makes sense...
Read More »
Frequency Converter delivers pure sine wave output voltage.
Available with output power levels of up to 12 kVA, customizable rugged, modular AC/AC frequency converter system FTT 3K Series uses microprocessor controlled, high frequency PWM technology to deliver 3-phase, 3,000 VA continuous sine-wave output power, from 3-phase input. Unit provides 3-phase outputs of 208, 380, or 400 V (L-L) at 50, 60, or 400 Hz. Output neutrals are internally connected to...
Read More »
Welder Generators offer 12,000 W peak power.
Trailblazer-® 302 EFI welder generators weld 280 A at 100% duty cycle (300 A for wire welding) and Bobcat 250 units weld 250 A at 100% duty cycle (275 A for wire welding). Providing 10,500 W continuous power, both Electronic Fuel Injected engine-driven, twin-cylinder models support stick, MIG, flux cored, AC/DC TIG, and gouging systems. Outputs are rated for operation at 104-
Read More »Solar Power Generator powers LED lighting up to 50,000 lumens.
Equipped with two 400 W Milspec solar panels to feed 366 Ah capacity gel pack batteries, Model SPG366A-400 replenishes batteries at rate of 24 A/hr. Mobile unit has pneumatic telescoping mast, stabilizing lift jacks, and can be connected to vehicle via trailer hitch. By calculating number of hours of sunlight and accounting for cloud cover, dirt, and other factors, operators can assess amount of...
Read More »Generac® Industrial Power - Delivering the Power Customers Demand
New Improvements to Generac Industrial Line of Standby Generators Waukesha, Wis. - Generac-® Power Systems, Inc., is excited to introduce a new concept - Generac Industrial Power. Although the name is new, it represents 50 years of proven expertise in manufacturing standby and portable power generation equipment. The name change accompanies a redesigned and re-engineered industrial product line,...
Read More »
Real Power's 180 kVA Truck-Mounted AC Generators Gaining Traction with Fleets
Chassis-Integrated, PTO-Driven Generators Turn Trucks Into Mobile Power Stations that Take Serious AC Power on the Road Fleets are utilizing Real Power technology to bring up to 180 kVA of AC power to remote work sites to operate power-hungry equipment and to bring emergency power to critical-care medical clinics. Indianapolis, Ind. - Real Power-® - a manufacturer specializing in the design and...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
