Electrical Connectors

Miniature M12 Connector is rated to 16 A and 630 V.
Electrical Connectors

Miniature M12 Connector is rated to 16 A and 630 V.

Used in industrial environments, S-coded flush-type connectors and cordsets have- 2 positions and protective earth ground. Panel-mount connectors are pre-assembled with 0.5 m long wires with conductor cross section of 16 AWG. With IP67 protection and metal M16 X 1.5 panel-mount thread, circular connector system is suitable for use as main power connector. Pin and socket versions are available...

Read More »
18-Position I/O Docking Connector supports 20,000 mating cycles.
Electrical Connectors

18-Position I/O Docking Connector supports 20,000 mating cycles.

Designed for cable and docking station applications in multiple markets, 34.1 x 23.6 x 9 mm 3800 Series comes in cable mount or vertical PCB versions and utilizes sequential mating system that, when connected, establishes ground system first to protect vital internal electronics from potential surges. Contact structure provides stable contact resistance and eliminates contact stubbing....

Read More »
High Current SMT Jumpers replace true zero ohm resistors.
Electrical Connectors

High Current SMT Jumpers replace true zero ohm resistors.

Manufactured from copper with silver plating, true Zero ohm high current SMT Jumpers come in 3 resistor chip sizes – 0603 chip size (Cat #5110), 0805 chip size (Cat #5106), and 1206 chip size (Cat #5108) – to simplify designs and footprint template compatibility. These connectivity devices provide low impedance and circuit linkage with footprint identical to zero ohm...

Read More »
Inlet and Cord Connectors support max pin temperature of 155
Electrical Connectors

Inlet and Cord Connectors support max pin temperature of 155

High Temperature Appliance Inlet and Cord Connectors- are rated according to IEC for 16 A at 250 Vac, and 20 A at 250 Vac according to UL/CSA. Series 1681 appliance inlets, offering snap-in or screw-on mounting, can be specified with terminals for solder, quick-connect, or screw connections. Series C22F inlets are available with EMC filter, while cord connectors come in straight Series 1658...

Read More »
M12 Circulator Connectors is available with screw locking.
Electrical Connectors

M12 Circulator Connectors is available with screw locking.

With IP68 protection and- meeting quality standards for secure contacting, Y-Circ® M series includes A, B, and D connectors in straight and angled form compliant with IEC 61076-2-101. Capability for individual configuration of 360° shielding and vibration protection allows optimum performance ratio regardless of end-user requirements. This modular system is suited for applications in...

Read More »
Intelliconnect Cable Harnesses and Waterproof Connectors on Show at Southern Manufacturing and Electronics Show
Electrical Connectors

Intelliconnect Cable Harnesses and Waterproof Connectors on Show at Southern Manufacturing and Electronics Show

UK Manufactured Connectors and Cables Meet Intelliconnect on Stand B73 Intelliconnect (Europe) Ltd the UK based specialist manufacturer of RF connectors will be displaying its cable harness assembly capabilities and market leading UK designed and manufactured RF and waterproof connectors at the Southern Manufacturing and Electronics Show at Farnborough in February 2015. Intelliconnect now offer...

Read More »
Fiber Optic Connectors withstand extreme outdoor conditions.
Electrical Connectors

Fiber Optic Connectors withstand extreme outdoor conditions.

Designed for industrial and FTTA applications, Q-ODC®-12 Connectors have high fiber density based on proven QN push-pull mating system. Units can connect up to 12 fibers in single mating step. Waterproof, dustproof, and corrosion-resistant, IP68-rated connectors can survive 30 days of submersion in over 3 m of water. They have also been subjected to stringent vibration testing without suffering...

Read More »
The New Intel Edison Developer Kit Utilizes Hirose's DF40 Series Board-To-Board Connector
Electrical Connectors

The New Intel Edison Developer Kit Utilizes Hirose's DF40 Series Board-To-Board Connector

SIMI VALLEY, CA- – Hirose, a leader in the development of innovative connector solutions, is proud to announce the use of its DF40 Series board-to-board connector in the newly-released Intel Edison miniature computing platform. The postage-stamp sized Edison chip set uses the Hirose DF40 70-pin header (part # DF40C-70DP-0.4V(51) on the board to allow developers to connect devices such as...

Read More »
Continuously Self-Testing GFCI exceeds 2015 UL requirements.
Electrical Connectors

Continuously Self-Testing GFCI exceeds 2015 UL requirements.

Pass & Seymour® Self-Test GFCI tests itself every 3 sec. Upon failure, red light flashes to indicate need for device replacement. SafeLock™ Protection feature automatically disconnects power to receptacle if it detects that critical components are damaged and protection is lost, and automatic shutter system helps prevent improper insertion of foreign objects. Tamper-resistant device is...

Read More »
The World' First: UL Certification for Socket-outlet and Plug for 10A 400V Class DC Distribution System
Electrical Connectors

The World' First: UL Certification for Socket-outlet and Plug for 10A 400V Class DC Distribution System

San Jose, CA, — NTT FACILITIES, INC. (Minato-ku, Tokyo, President: Kiyoshi Tsutsui) and Fujitsu Component Limited (Shinagawa-ku, Tokyo, President: Koichi Ishizaka) obtained UL(1) certification for its first of a kind socket-outlet and plug for 10A 400V class DC distribution system. The DC distribution system (voltage level around 400 V d.c. in ICT or similar application) eliminates energy loss...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics