Switch Enclosures are sealed to minimum IP66 standards.
Measuring 65 x 65 x 57 mm, RoHS-compliant polycarbonate enclosures are designed as accessories for low-profile Series 84 illuminated 22.5 mm emergency-stop button. Range includes 11 enclosures with options for mounting 1, 2, 3, 4, or six 22.5 mm switches. Additionally, 16 mm version also exists for Series 61 emergency-stops, and 94 x 94 x 81 mm emergency-stop box is suited for applications...
Read More »Bracket Boxes are designed to reduce installation time.
Steel CityÃ-® MS series Bracket Boxes feature gripping teeth that eliminate need to use fasteners and tools for installing outlet box onto metal stud. Installed within 4 sec., products feature center mark locator window and side support for stud cavity depths up to 4 in. Boxes come in 4 and 4 11/16 in. square sizes, in 1 and 2 1/8 in. depths, and include eccentric knockouts and armored cable...
Read More »
Junction Box contains integrated DC power supply.
Allowing use of DC sensors in AC applications, 4-port M12 eurofastÃ-® AC/DC Junction Box simulates 2-wire AC sensor, providing alternative to installing separate power supply and relays. Box offers 85-132 Vac input, 100 mA output per port, and 24 Vdc output to PNP short-circuit protected sensors only. Made of die cast aluminum alloy, encapsulated housing offers IP67 protection when all ports...
Read More »Junction Boxes offer quick-disconnect wiring consolidation.
Low profile M12 eurofast junction boxes offer multiple home run connector and integral cable options. Integral cables come with 12-pin, 1 1/8-16UN minifastÃ-® connector for single output junction boxes. Available in 4 or 8-port with single or dual output, junction boxes operate at 2 A per port and 10 A total, with operating voltage of 10-48 Vdc. Fully-encapsulated nylon housing with LEDs...
Read More »Third Party Logistics and Fulfillment
This whitepaper provides an overview of third party logistics (3PL) and fulfillment services.
Read More »
Wiring Boxes offer nail- or screw-on mount styles.
Suitable for flush mounted power receptacles installed in Ã-½ or 3/8 in. drywall, Range and Dryer Boxes accept twenty-two #14, eighteen #12, or sixteen #10 wires. Bracket countersink allows for mounting with #8 wafer head or wallboard screws. With Height Site alignment guide that centers box on reference mark, box levelers align device at right angle to stud. Stabilizer legs and positioning...
Read More »Junction Boxes interconnect up to 8 strain gage load cells.
Offered in standard and stainless steel versions, Junction Boxes are fitted with integral resistor network, enabling units to support corner load adjustment in scale. Boxes feature metric M12 EMC cable glands for cable diameters of 4-6.5 mm and two M16 EMC glands for cable diameters of 5-9 mm. Glands use screening design and are 100% EMC-proof according to EN 45501.
Read More »Junction Box suits explosion-proof applications.
Measuring 4 x 4 in., GUP Explosion-Proof Enclosure is available in 2 configurations. Model GUP214-TB features ten Ã-¾-in. NPT hubs with 7 conduit plugs, and Model GUP215-TB features six Ã-¾-in. NPT hubs with 3 conduit plugs. Both have 2 hubs on top and bottom, and 1 hub on each side. Body is constructed of electro-galvanized ductile iron finished in aluminum acrylic paint, and cover is...
Read More »Steel and Wood Stud Boxes align at right angle to stud.
Designed for use with Ã-½ or 5/8 in. wallboard, 22.5 in.Ã-³ Steel and Wood Stud Boxes accept eleven No. 14, ten No. 12, and nine No. 10 wires. Bracket countersink allows for No. 8 wafer head or dry wall screws with minimal wallboard bow. Classified for 2 hr wall and ceiling fire resistance, products have Height Site alignment guide and box levelers. Wood Stud Box offers hands-free...
Read More »Junction Box has pre-mounted swing ears for attachment.
Used on walls up to Ã-¾ in. thick, Steel CityÃ-® 4 in. Square Old Work Box with Swing Ears enables contractor to secure installation by turning swing ears upward to grip backing of existing sheetrock or drywall. Swing ears are pre-mounted to box, eliminating need for on-site assembly while allowing secure installation. Swing ear mechanism turns with pan-head self-tapping screws on...
Read More »
Junction Boxes provide multiple I/O points.
Available in 4- and 8-port models, pentafast Junction Boxes contain integrated PUR cable or M12 eurofastÃ-® 12-pin Quick Disconnection, and are offered with power and signal LEDs. Nylon encapsulated units provide IP67 protection and meet UL, CSA, NEMA 1, 3, 4, and 6P standards. Operating voltage is 10-30 Vdc, while operating current is 1 A per port and 3 A total with 1 power pair.
Read More »
SRG Global Coatings Enhance Surface Durability, Efficiency, Design Flexibility
SRG Global's automotive coatings enhance the structural integrity of the finished part while also improving vehicle efficiency. Check out our video to learn more.
Read More »
