Electric Hammers

Rotary Hammer features 3 modes of operation.
Electric Hammers

Rotary Hammer features 3 modes of operation.

Equipped with 3-jaw keyless ClicLoc(TM) Chuck Change System, 11224VSRC 7/8 in. SDS-plus® Rotary Hammer provides users with single tool to drill concrete, masonry, wood, and metal. It is designed for continuous drilling and features D-handle design, variable speed, and Vario-Lock(TM) technology. Unit operates in rotation-only, rotary hammer, or hammer-only modes, combining 6.9 A power, 1.6...

Read More »
Rotary/Demolition Hammers deliver 19.9 lb-ft blow energy.
Electric Hammers

Rotary/Demolition Hammers deliver 19.9 lb-ft blow energy.

Hammers incorporate vibration isolation system and in-line design to reduce worker fatigue. Speed control matches tool speed to the job, while electronic feedback control circuit provides soft-start and maintains tool speed under load. Built with all-metal barrels and gear housings as well as steel gears and components, models include 5337-21, Â-¾ in. hex demolition hammer; 5340-21, 2 in....

Read More »
Rotary Hammers have smooth-running, ergonomic design.
Electric Hammers

Rotary Hammers have smooth-running, ergonomic design.

Models TE 16 and TE 16-C feature regulated motor, compact design for tool balance, and recessed controls. Suited for mechanical, electrical, and seating contractors, Model TE 16 provides repetitive hole drilling in medium-diameter range. Model TE 16-C offers additional chiseling function suitable for masonry and concrete. Both are packaged in impact-resistant case with depth gauge, dust shield,...

Read More »
Rotary Hammer produces 0-4,600 blows per minute.
Electric Hammers

Rotary Hammer produces 0-4,600 blows per minute.

D-handle Rotary Hammer, Model BHE-D24 incorporates Variospeed electronic speed control, reverse feature for drilling, and die cast aluminum gearbox that allows rapid heat dissipation. Winding protection grid deflects airborne debris away from armature winding. Large knob lets operator change from percussion with rotation drilling to rotation only. With 5.6 A motor, drilling capacity is up to 1...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Hex Impact Driver provides 1,062 lb-in. torque.
Electric Hammers

Hex Impact Driver provides 1,062 lb-in. torque.

Measuring 9 in. long with Â-¼ in. hex shank capacity, Model 6952 produces 0-3,100 impacts per minute, while offering access to fasten in confined spaces. Variable speed, ranging from 0-3,200 rpm allows controlled fastening, while forward/reverse switch permits single-handed operation. All-metal casing and heavy-duty hammer and anvil withstand jobsite environments. Applications include...

Read More »
Rotary Hammer features electronic speed control.
Electric Hammers

Rotary Hammer features electronic speed control.

Model KHE-D28 D-handle rotary hammer provides consistent speed between load and no-load, making it suitable for through-drilling and anchor setting as well as light chiseling in masonry materials, steel, and wood. The 8.2 A motor provides force of blows of 0-2.5 J at 0-4,600 blows per min, and no-load rpm of 1-1,000. Drilling capacity is 1-1/8 in. in concrete, 1-9/16 in. in wood, and Â-½ in....

Read More »
Rotary Hammer features pistol grip design.
Electric Hammers

Rotary Hammer features pistol grip design.

Model BHE22 features 5.2 A motor and quick-change, 3-jawed keyless chuck system that allows operator to rapidly install accessories. It incorporates 360° adjustable rubber-coated side handle and large knob that enables operator to change from percussion with rotation drilling to rotation only. Tool offers drilling capacity of 7/8 in. in concrete, 1 3/16 in. in wood, and Â-½ in. in...

Read More »
Rotary Hammer operates at speeds to 6,000 rpm.
Electric Hammers

Rotary Hammer operates at speeds to 6,000 rpm.

Model 11250VSR, Â-¾ in. Bulldog® SDS-plus® Rotary Hammer incorporates rotating brush system that provides same power level in reverse and forward. With 6 A motor, unit operates at speeds to 1,350 rpm in rotation-only mode. In rotary hammer mode, unit offers up to 6,000 bpm and 1.4 lb-ft of impact energy with each blow. Additional offerings include SDS-plus tool holder system,...

Read More »
Electric Hammers

Hammers are offered in combination and demolition models.

Models 11241EVS SDS-max and 11248EVS Spline are 1 9/16 in. units powered by 11 A motors. They provide 1,700 to 3,300 bpm operating at 0-170 to 340 rpm. Models 11240 SDS-max and 11247 Spline are 1 9/16 in. units powered by 10 A motors that provide 5.2 ft-lbs of impact energy, 400 rpm, and 3000 bpm. Combination Dual Mode Selector converts each unit from rotary hammer to hammer only. Models 11388...

Read More »
Rotary Hammers perform three different functions.
Electric Hammers

Rotary Hammers perform three different functions.

UHE 22 and UHE 28 Multi Hammers allow users to switch from drilling, percussion drilling, or no-rotation hammer operations. Applications include drilling hole in steel or wood, drilling anchor holes in concrete or brick, or chiseling concrete or brick. Two speed gearbox provides 0-1050 or 0-2900 rpm no-load speed on UHE 22, and 0-950 or 0-2600 on UHE 28. Both tools have electronic controls,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers