Electric Hammers

Electric Hammers

Rotary Hammers provide 7.0 lb-ft impact energy.

Rated at 11.0 A, 1 9/16 in. Model HR4001C and 1 9/16 in. Model HR4010C with AVT technology feature 235-480 rpm speeds synchronized with 1,350-2,750 blows/min to prevent overlapping impacts. AVT counterbalance system minimizes vibration to 4.5 m/sÂ-², while variable speed dial with 5 preset speeds and electronic speed control minimizes speed loss. Torque limiter ensures stable torque control...

Read More »
Electric Hammers

Rotary Hammer is suited for chipping and light demolition.

Able to work with stone, concrete, and brick, MHE 65 SDS-Max Chipping Hammer employs 10.5 A motor that provides 1,325-2,650 bpm and 1.0-10.0 joules of single blow energy. Vario-Tacho-Constamatic electronic speed control maintains constant speed between load and no-load. Other features include magnesium die-cast gear housing, auto-stop carbon brushes, spring-loaded lip seal, winding protection...

Read More »
Electric Hammers

Bench Rammer delivers 760 blows per minute.

With bore size of 1 5/16 in. and 4 in. stroke, Model MP-241B features replaceable rubber butt and double-action sand wiper seal to exclude dirt and grit from inside tool. Aluminum backhead minimizes weight and operator fatigue, while hooked lever throttle maximizes operator comfort.

Read More »
Rotary Hammer offers efficient dust collection capability.
Electric Hammers

Rotary Hammer offers efficient dust collection capability.

Suited for continuous operation, 1 in. HR2432 has built-in dust collection system that consists of bag, fan, and in-line dust collection hose with elbow-shaped nozzle. Unit weighs 6.6 lb, is rated 6.7 A, and provides 1.6 ft-lb impact energy. With no-load speed of 0-1,000 rpm, hammer delivers 0-4,500 bpm and features 3-mode operation switch. Optimum chisel positioning is accomplished with 360Â-

Read More »
Electric Hammers

Rotary Hammer provides 3 modes of operation.

Equipped with 7.0 A motor, 15/16 in. SDS Plus Rotary Hammer, Model DH24PF3 produces 2.5 lb-ft impact energy, no-load speed of 0?1,150 rpm, and impact rate of 0?4,600 ipm. Three modes of operation include drilling only, hammering only, and hammer drilling, controlled by mode selector dial located under body. When using cold chisel or spade bit, variable lock mechanism, available in hammer mode...

Read More »
Rotary Hammer performs hammer drilling and chiseling.
Electric Hammers

Rotary Hammer performs hammer drilling and chiseling.

Equipped with 9.6 A motor, Spline Drive KHE 54 offers no-load speed of 135-275 rpm and 1,300-2,600 bpm. Vario-Tacho-Constamatic electronic speed control enables tool to maintain constant speed between load and no-load. Overload clutch limits maximum amount of torque applied if tool blocks during operation. Hammer offers rotational torque of 531 lb-in. and drilling range of Â-½-1Â-½ in....

Read More »
Rotary Hammer delivers 2.2 lb-ft at 0-5,800 bpm.
Electric Hammers

Rotary Hammer delivers 2.2 lb-ft at 0-5,800 bpm.

Offered in D-handle and Pistol-Grip versions, 1 in. SDS-plusÂ-® Bulldog Xtreme(TM) Models 11255VSR and 11253VSR operate from 0-1,300 rpm using 7.2 A motor. Drilling range in concrete is 3/16-5/8 in. with solid bit capacity of 1 in. and thin wall core capacity of 2 5/8 in. Piston, striker, and impact bolt and guide tube are dialed in with tight tolerances to remain concentric. Rotating brush...

Read More »
Electric Hammers

Rotary Hammer features vibration absorbing grip.

Featuring 5.9 A motor with 620 W input power, 7/8 in. Model DH22PB cuts concrete, mortar, and tile. It offers drilling only or hammer drilling modes, lock-on speed button for continuous operation, and electronic variable speed control of 0-1,150 (0-640 reverse) rpm and 0-4,400 ipm impact rate. DH22PB weighs 5.1 lb, is 13.81 in. long, and features mode selector dial, lock-on speed button, and...

Read More »
Cordless Impact Driver provides up to 885 lb-in. torque.
Electric Hammers

Cordless Impact Driver provides up to 885 lb-in. torque.

With rotational speed up to 2,500 rpm, SSP 12 is used for driving bolts, screws, and nuts in various applications without associated torque reaction. It utilizes Variospeed technology and features air-cooled battery system that conduction-cools 12 V battery and charger. Battery offers 2 A hr and service life to 2,000 charges. Along with rubber-coated T-handle, 3.7 lb unit also comes with Â-¼...

Read More »
Rotary Hammer combines hammer drilling and chiseling.
Electric Hammers

Rotary Hammer combines hammer drilling and chiseling.

Featuring 9.6 A motor, Model KHE 55 offers no-load speeds of 135-275 rpm and 1.300-2,600 bpm. Vario-Tacho-Constamatic electronic speed control enables tool to maintain virtually constant speed between load and no-load. Hammer offers rotational torque of 531 lb-in. and variable impact energy from 1.0-9.0 joules per blow. Drilling range is from Â-½-1Â-½ in. with maximum capacity in concrete...

Read More »

All Topics