Rotary Hammer has compact, lightweight design.
Press Release Summary:
Weighing 9.6 lb and measuring 12 in. long, Model 0756-22 cordless 1 in. SDS Rotary Hammer employs 28 V reversible motor that delivers 4,700 bpm and 2.1 ft-lb of impact energy. Rotary Hammer has 1 in. solid bit drilling capacity in concrete and optimal concrete drilling range of 3/16 to ¾ in. Kit includes two V28 batteries with built-in fuel gauge, 1 hr charger with pass-through plug, side handle, depth gauge, and heavy duty case.
Original Press Release:
Milwaukee Adds 1 in. Compact SDS Rotary Hammer to V28(TM) Lineup
New Design Delivers Power, Portability and Versatility
MILWAUKEE, WI - Milwaukee Electric Tool Corporation recently introduced the 0756-
22 V28 Cordless 1" Compact SDS Rotary Hammer, designed to provide professional and
industrial contractors with corded rotary hammer power and versatility in a compact, lightweight package.
Powered by Milwaukee's V28 Lithium-Ion technology, the 0756-22 provides consistent,
fade free power and superior run time, making it an ideal solution for electrical, mechanical, pipe fitter and plumbing trades. With three modes of operation - rotary hammer, drill only and chipping - contractors can use the tool for concrete drilling, wood and steel drilling and light chiseling applications. A large mode selector switch makes it easy to switch the tool into the desired mode and a chisel adjustment mode also allows the user to adjust the chisel bit to the work piece to maintain a comfortable tool orientation when chipping.
Milwaukee designed the 0756-22 to be a compact, lightweight, and highly ergonomic
rotary hammer. Its compact L-shape design positions the operator's hand directly behind the drill bit for optimal balance and the non-slip soft grip handle helps to reduce vibration and fatigue. With a length of only 12" inches and a total weight of 9.6 lbs (including a V28 battery) contractors can easily access tight areas and control the tool even in extended drilling applications. The large two-finger variable speed trigger ensures smooth, accurate starts and comfortable drilling. Contractors that frequently drill overhead and work on lifts, scaffolds and ladders will enjoy the tool's compact well balanced design and the built-in battery fuel gauge on V28 batteries that allows them to check how much run time is left in the battery before climbing up to the work area.
The 0756-22 hits hard and drills fast with a high-powered 28-volt, reversible motor that delivers 4,700 BPM and 2.1 ft.-lbs. of impact energy. The all metal, magnesium gear case and block construction provide precise bearing and gear seating for long term reliability. The Rotary Hammer has a 1" solid bit drilling capacity in concrete and an optimal concrete drilling range of 3/16" to ¾".
The 0756-22 - V28 1" SDS Compact Rotary Hammer Kit includes two V28 batteries with
a built-in fuel gauge, a 1-hour charger with pass-through plug, side handle, depth gauge and heavy duty case. Also available is the 0756-20 - V28 1" SDS Compact Rotary Hammer bare tool for contractors that want to add the rotary hammer to their current V28 cordless lineup.
Features and Specifications
o 28 Volt High Power Motor
o 2.1 Ft.-lbs of impact energy for fast drilling and powerful chipping
o Compact, lightweight L- Shape design weighs only 9.6 lbs to provide easy access to tight spaces and extended use comfort
o Three Modes of Operation - Hammer Drill / Drill / Chipping
for maximum versatility
o Variable Speed Trigger and reverse switch allow for
accurate drill bit starting and easy bit / fastener removal
o Keyless SDS Chuck for fast, tool-free bit Changes
o Integral Clutch minimizes torque reactions and helps protect
gears
o Includes Tool, (2) 28v Li-Ion Batteries with fuel gauge, 1-hour
charger with pass through plug, side handle, depth gauge
and blow molded case
Available Accessories
o SDS Chuck Adapter (48-66-1370) includes a 1/2 inch all metal three jawed chuck, an SDS
to 1/2-20 thread adapter, chuck screw and chuck key. The kit allows straight shank twist bits to be used in a "drill only" mode
o SDS Hammer Steel for Chipping and Chiseling
o Bull Points (48-62-6010) for demolition work and starting holes in the center of a
concrete slab
o Flat Chisel (48-60-6015) for demolition work, chipping and channeling in concrete
o Scaling Chisel (48-62-4082) for removing weld spatter, scale and concrete form
overflow and seepage
Maximum Drilling Capacities
Concrete 1" / 26mm
Steel ½" / 13mm
Wood 1-¼" / 30mm
Optimal Drilling Range
Concrete 3/16" - ¾"
Maximum Thin Wall Core Bit Capacities
Concrete 2-½" / 65mm
Brick / Block 2-5/8" / 68mm
About V(TM) Technology
Milwaukee recently announced a new limited warranty for all of its V(TM) technology
Lithium-Ion batteries (both the V28 and V18 lines), extending coverage for up to 2,000 charge cycles or five years from the date of purchase/first charge.
V(TM) technology is an exclusive integration of chemistry, cell design and circuitry,
charging system and tool design have all been optimized to create a superior Lithium-Ion battery solution. Milwaukee's Li-Ion batteries feature lithium manganese chemistry, which has been field proven to be the most powerful and practical for professional power tool applications on the market today. This technology was developed by Milwaukee in partnership with a leading global battery company to produce the first heavy duty Li-Ion battery for use in high amp draw applications.
The award-winning V(TM) technology platform is available in an expanding range of
voltages and products for professionals seeking fade-free power, longer runtimes and equal or less weight than 18V NiCad battery powered tools. Due to a patent-pending performanceoptimizing circuit, V(TM) technology batteries are able to operate at peak performance under extreme conditions such as hot or cold temperatures and withstand battery heating due to heavy use. In addition, Milwaukee's Li-Ion batteries are the first to feature a built-in fuel gauge so users always know how much run time is available without needing to place it on a charger.
About Milwaukee Electric Tool
Milwaukee Electric Tool Corporation, a Brookfield, Wisconsin-based subsidiary of
Techtronic Industries Co. Ltd. (TTI) (HKEx stock code: 669, ADR symbol: TTNDY) is an
industry leading manufacturer and marketer of professional and industrial heavy-duty portable corded and cordless power tools, accessories and safety equipment. Products include Sawzall® reciprocating saws, circular saws, driver drills, hammer drills, rotary hammers, band saws, pneumatic nailers, grinders, sanders and the new Trade Titan series of heavy duty work carts and accessories.
Milwaukee will repair or replace, without charge, any tool which examination proves to
be defective in material or workmanship from five (5) years after the date of purchase.
For more information on the full line of Milwaukee power tools and accessories, please call 1-800-SAWDUST or visit www.milwaukeetool.com.
