Electric Hammers

Rotary Hammers include anti-vibration system.
Electric Hammers

Rotary Hammers include anti-vibration system.

Delivering 2.0 lb-ft of impact energy and up to 5,980 blows/min, 1 in. Compact SDS Rotary Hammer features 7.0 A motor, rotating brush plate to provide equal power in forward and reverse, and all-metal magnesium gear case. Equipped with 7.5 A motor, 1 in. D-Handle Rotary Hammer delivers 2.4 lb-ft of impact energy at 5,900 blows/min. It has 1 in. solid bit drilling capacity in concrete and optimal...

Read More »
Lightweight Impact Hammer delivers up to 2,200 bpm.
Electric Hammers

Lightweight Impact Hammer delivers up to 2,200 bpm.

Weighing 6.2 lb, IQv(TM) Series Model W360 Â-½ in. square drive cordless Impactool(TM) features variable speed trigger and electrical brake for optimal control of fastening and loosening. Unit delivers 360 lb-ft reverse torque. Along with all-metal hammer case, product features metal-supported, composite housing that withstands exposure to fluids and chemicals in harsh environments. Tool...

Read More »
Cordless Impactool incorporates quick-change hex.
Electric Hammers

Cordless Impactool incorporates quick-change hex.

Weighing 2.7 lb, IQv(TM) Series Model W040 Â-¼ in. quick-change Impactool(TM) features variable speed trigger and electrical brake for optimal torque control. It delivers 40 lb-ft max torque, preventing users from stripping bolts and damaging nuts. Along with all-metal hammer case, product features metal-supported, composite housing that withstands exposure to fluids and chemicals in harsh...

Read More »
Electric Hammers

Cordless Rotary Hammers allow access in tight areas.

Models DC212KA, DC223KA, and DC233KL are 18, 24, and 36 V rotary hammers, respectively, built with SHOCKS(TM) - Active Vibration Control System to promote comfortable drilling experience. While DC212KA offers dual mode (hammerdrill/drill) operation, other models add chipping function. All models have anti-slip grip and 10Â-½ in. long, L-Shaped design. They deliver 4,100-4,400 bpm, offer...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Electric Hammers

Rotary Hammer has compact, lightweight design.

Weighing 9.6 lb and measuring 12 in. long, Model 0756-22 cordless 1 in. SDS Rotary Hammer employs 28 V reversible motor that delivers 4,700 bpm and 2.1 ft-lb of impact energy. Rotary Hammer has 1 in. solid bit drilling capacity in concrete and optimal concrete drilling range of 3/16 to Â-¾ in. Kit includes two V28 batteries with built-in fuel gauge, 1 hr charger with pass-through plug, side...

Read More »
Rotary Hammers offer range of accessories.
Electric Hammers

Rotary Hammers offer range of accessories.

Suited for concrete, masonry, or natural stone, Rotary Hammers are available with round shank, SDS-plus, SDS-max, and spline masonry carbide bits in 4-cutter and 2-cutter designs. Four-cutter unit features self-centering tip to optimize penetration and make clean holes. Dust extraction accessories allow tools to be hooked to vacuum that collects dust at point of origin, minimizing user's exposure...

Read More »
Electric Hammers

Rotary Hammer drills, levels, and chisels.

Featuring vibration-reducing construction and rubber-insulated handles, KHE 75 SDS-Max enables users to move between masonry drilling and chiseling operations without switching tools. It employs S-automatic safety clutch and Vario-Tacho-Constamatic electronic speed control, which enables unit's 10.5 A motor to deliver no-load variable speed from 140-280 rpm and 1,325-2,600 bpm. Rotational torque...

Read More »
Rotary Hammer is powered by 36 V lithium-ion battery.
Electric Hammers

Rotary Hammer is powered by 36 V lithium-ion battery.

Weighing 9.5 lb, Model 11563VSR LITHEON(TM) Bulldog® Rotary Hammer features 7.2 A motor that delivers 0-4,260 bpm and 0-960 rpm, while dialed-in and concentric piston, striker, impact bolt, and guide tube provide strike force of 2.2 ft-lb. Drilling depth ranges from 3/16 to 5/8 in. in concrete, with 1 in. solid bit capacity and 2 5/8 in. thin wall core capacity. Three-mode selector allows...

Read More »
Electric Hammers

Rotary Hammers provide 7.0 lb-ft impact energy.

Rated at 11.0 A, 1 9/16 in. Model HR4001C and 1 9/16 in. Model HR4010C with AVT technology feature 235-480 rpm speeds synchronized with 1,350-2,750 blows/min to prevent overlapping impacts. AVT counterbalance system minimizes vibration to 4.5 m/sÂ-², while variable speed dial with 5 preset speeds and electronic speed control minimizes speed loss. Torque limiter ensures stable torque control...

Read More »
Electric Hammers

Rotary Hammer is suited for chipping and light demolition.

Able to work with stone, concrete, and brick, MHE 65 SDS-Max Chipping Hammer employs 10.5 A motor that provides 1,325-2,650 bpm and 1.0-10.0 joules of single blow energy. Vario-Tacho-Constamatic electronic speed control maintains constant speed between load and no-load. Other features include magnesium die-cast gear housing, auto-stop carbon brushes, spring-loaded lip seal, winding protection...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers