Bench Rammer delivers 760 blows per minute.
With bore size of 1 5/16 in. and 4 in. stroke, Model MP-241B features replaceable rubber butt and double-action sand wiper seal to exclude dirt and grit from inside tool. Aluminum backhead minimizes weight and operator fatigue, while hooked lever throttle maximizes operator comfort.
Read More »
Rotary Hammer offers efficient dust collection capability.
Suited for continuous operation, 1 in. HR2432 has built-in dust collection system that consists of bag, fan, and in-line dust collection hose with elbow-shaped nozzle. Unit weighs 6.6 lb, is rated 6.7 A, and provides 1.6 ft-lb impact energy. With no-load speed of 0-1,000 rpm, hammer delivers 0-4,500 bpm and features 3-mode operation switch. Optimum chisel positioning is accomplished with 360-
Read More »Rotary Hammer provides 3 modes of operation.
Equipped with 7.0 A motor, 15/16 in. SDS Plus Rotary Hammer, Model DH24PF3 produces 2.5 lb-ft impact energy, no-load speed of 0?1,150 rpm, and impact rate of 0?4,600 ipm. Three modes of operation include drilling only, hammering only, and hammer drilling, controlled by mode selector dial located under body. When using cold chisel or spade bit, variable lock mechanism, available in hammer mode...
Read More »
Rotary Hammer performs hammer drilling and chiseling.
Equipped with 9.6 A motor, Spline Drive KHE 54 offers no-load speed of 135-275 rpm and 1,300-2,600 bpm. Vario-Tacho-Constamatic electronic speed control enables tool to maintain constant speed between load and no-load. Overload clutch limits maximum amount of torque applied if tool blocks during operation. Hammer offers rotational torque of 531 lb-in. and drilling range of -½-1-½ in. with max...
Read More »
Application Selection Guide: Choosing the Right Air Compressor
Choosing the right air compressor for your application is essential, but it can feel overwhelming. To learn more about how to make the right choice, read our eBook.
Read More »
Rotary Hammer delivers 2.2 lb-ft at 0-5,800 bpm.
Offered in D-handle and Pistol-Grip versions, 1 in. SDS-plus-® Bulldog Xtreme(TM) Models 11255VSR and 11253VSR operate from 0-1,300 rpm using 7.2 A motor. Drilling range in concrete is 3/16-5/8 in. with solid bit capacity of 1 in. and thin wall core capacity of 2 5/8 in. Piston, striker, and impact bolt and guide tube are dialed in with tight tolerances to remain concentric. Rotating brush plate...
Read More »Rotary Hammer features vibration absorbing grip.
Featuring 5.9 A motor with 620 W input power, 7/8 in. Model DH22PB cuts concrete, mortar, and tile. It offers drilling only or hammer drilling modes, lock-on speed button for continuous operation, and electronic variable speed control of 0-1,150 (0-640 reverse) rpm and 0-4,400 ipm impact rate. DH22PB weighs 5.1 lb, is 13.81 in. long, and features mode selector dial, lock-on speed button, and 360-
Read More »
Cordless Impact Driver provides up to 885 lb-in. torque.
With rotational speed up to 2,500 rpm, SSP 12 is used for driving bolts, screws, and nuts in various applications without associated torque reaction. It utilizes Variospeed technology and features air-cooled battery system that conduction-cools 12 V battery and charger. Battery offers 2 A hr and service life to 2,000 charges. Along with rubber-coated T-handle, 3.7 lb unit also comes with -¼ in....
Read More »
Rotary Hammer combines hammer drilling and chiseling.
Featuring 9.6 A motor, Model KHE 55 offers no-load speeds of 135-275 rpm and 1.300-2,600 bpm. Vario-Tacho-Constamatic electronic speed control enables tool to maintain virtually constant speed between load and no-load. Hammer offers rotational torque of 531 lb-in. and variable impact energy from 1.0-9.0 joules per blow. Drilling range is from -½-1-½ in. with maximum capacity in concrete of 1...
Read More »
Combination Hammer features 6-in. core bit capacity.
Model 11263EVS 1-¾ in. SDS-max-® Combination Hammer targets concrete drilling or chipping tasks. Tool's 13.5 A motor powers 145-280 rpm and 1,350-2,800 bpm with 9.6 and 11.1 ft/lb impact energy in drilling and chipping, respectively. Vario-Lock(TM) positioning rotates and locks tool holder into 12 different positions. Additional handle space, 360-
Read More »
Rotary Hammers incorporate anti-theft protection.
Rotary hammers utilize CODE! anti-theft protection system, which operates via one-touch IR remote control to protect tools against unauthorized use. Owners can enable or disable multiple CODE!-protected rotary hammers using one key. Each tool can be assigned its own key for single user or multiple keys for multiple authorized users. Integrated LED signals whether tool is enabled or disabled, and...
Read More »
TPA Motion Introduces Industry's First Compact Robotic Positioner for Medical Devices
TPA Motion's microplate handling robots are designed specifically for medical instruments and lab automation devices. Check out the video to learn more.
Read More »
