New Drivers Products

Dual Photovoltaic MOSFET Driver replaces discrete solutions.

Featuring optically coupled technology that provides 3,750 Vrms input to output isolation, FDA217 can achieve 27 Ã-µA short circuit current with input LED current of 30 mA. Each independent driver consists of LED optically coupled to photodiode array, and each array can generate open circuit voltage of 12.2 V and short circuit current of 9.1 Ã-µA with forward LED current of 10 mA. Driver...

Power Management Gate Drivers target IGBT and SiC FET designs.

As 35 V, single-channel output stage power management gate drivers, UCC27531 and UCC27532Ã- prevent digital controllers from operating too close to power circuitry. UVLO settings and rail-to-rail output voltage provide system protection, while split-output configuration improves Miller turn-on immunity and preventsÃ- IGBT/MOSFET damage. Along with peak current of 2.5 A source and 5 A...

LED Driver offers multiple dimming options.

Supplied in QFN-16 package with Pb-free pure-tin plating and flammability rating of UL 94V-0, PA5711 offers such dimming options as PWM, Linear Dimming, Motion Detection, and Light Sense control inputs. Direct gate driver control is available through active high enable pin, and internal oscillator frequency can be set externally through resistor. Allowing leading edge blanking with desired delay...

Two-Channel LED Drivers are suited for use with high-CRI lamps.

Providing color control for 2-color LED light engines, MSL2021/23/24 two-channel SSL LED drivers can be accompanied with Atmel AVRÃ-® MCU or ARMÃ-® processor-based MCU. Each model drives one dominant LED string withÃ- linear controller and one color LED string withÃ- low-side buck controller to achieve target CCT coordinate and replicate color spectrum to attainÃ- high CRI...

Hydrogen and Check Valves

Hydrogen powers various sectors, offering cleaner energy solutions. This white paper describes the different types of hydrogen as well as the crucial role of reliable check valves in its production, storage, and distribution.

LED Controller and Driver facilitate retrofit bulb design.

Offered in 6-pin TSOT package measuring 2.9 x 2.9 mm, Model TPS92075 is designed for phase-dimmable, offline AC/DC LED lamp and downlight applications such as E14, GU10, A19, and PAR20/30/38 bulbs. Constant-current lighting controller achieves power factor correction above 0.9 while delivering flicker-free dimming when used with conventional wall dimmers. Supplied in 10-pin PowerPad™ MSOP...

IC Coupler drives middle-capacity IGBT or power MOSFET.

Housed in SO6 package, Model TLP152 consists of GaAlAs infrared LED optically coupled to high-gain photodetector IC chip. Unit achieves low output current of 2.5 A and contributes to low-power consumption with operating power supply voltage of 10–30 V. With guaranteed minimum creepage and clearance distances of 5 mm and internal insulation thickness of 0.4 mm, Model TLP152Ã- is suited for...

TRIAC Dimmable LED Driver IC serves retrofit applications.

Flicker-Free™ IS31LT3935 solid state lighting (SSL) LED controller featuresÃ- dimming core based on AccuDim™ technology, which makes LED retrofit lamps have monotonic dimming profile across entire dimming range. With 100% compatibility with leading edge, trailing edge, and digital TRIAC dimmers, single-stage current mode LED controller comes in 3 x 3 mm DFN-10 package with exposed pad and...

AC/DC LED Driver IC targets general lighting applications.

With operating voltage from 85–265 Vac, PFC greater than 0.95, and current accuracy of Ã-

Programmable LED Drivers provide universal adaptability.

Available with either AC or DC power inputs, MESO series works with most LED loads and offers less than 20% THD, greater than 0.9% PF, and input range of 90–305 Vac. Each model is available in slim plastic package with flying leads or metal ballast style case with side and bottom terminal blocks. Programming interface enables designers and assembly lines toÃ- customize LED drive current and...

Compact LED Backlight Drivers are intended for smartphone LCDs.

Supplied in 12-ball, 1.7 x 1.4 x 0.5 mm WL-CSP package with 0.4 mm pitch, AS3674 and AS3490 are inductive boost converters that exhibit 90% peak efficiency and require 4 external components. Able to control 5 current sources with each driving 2 LEDs in series, AS3674 is 2 MHz DC/DC switch mode step-up converter that allows current for LED channels to be set by external resistor with max of 25 mA...

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.