DC to DC Power Supplies (Converters)

DC/DC Converters feature ultra wide 4:1 input.
DC to DC Power Supplies (Converters)

DC/DC Converters feature ultra wide 4:1 input.

With input ranges of 9~36 and 18~75 Vdc, 10 Watt AM10TW-Z Series provides single and dual outputs of 3.3, 5, 12, 15, ±5, ±12, and ±15 Vdc with ±1.2% accuracy. Units provide 1,600 Vdc isolation and are fully protected against short circuit, over-voltage, and over-current, with no minimum load required. Remote On/Off function makes converters suited for portable,...

Read More »
DC to DC Power Supplies (Converters)

PWM Synchronous Buck Control IC offers up to 95% efficiency.

Supplied in MSOP-10 ePad package, 500 kHz MIC2169B allows compact DC/DC solutions with minimal external component count. It operates from 3-14.5 V input without any additional bias voltage and can drive loads up to 30 A. Output voltage can be regulated down to 0.8 V, and adaptive all-N Channel MOSFET drive scheme results in optimal efficiency. Also, current limit accuracy is maintained by...

Read More »
DC to DC Power Supplies (Converters)

Compact Boost Converter suits low-voltage applications.

Supplied in 1.5 x 2 x 0.6 mm max plastic packages, SC120/SC121/SC122 step up inputs from 0.7 V to regulated output settable from 1.8-5.0 V. Products feature 1.2 MHz low-noise PWM operation, internal low-on-resistance switch, and synchronous rectifier for up to 94% efficiency. Along with automatic PSAVE mode and anti-ringing circuit, converters offer ±1.5% initial accuracy, internal/external...

Read More »
DC-DC Converter offers digital programming via I2C interface.
DC to DC Power Supplies (Converters)

DC-DC Converter offers digital programming via I2C interface.

Housed in 3.0 x 3.0 x 0.6 mm MLPQ package, EcoSpeed(TM) SC493 features input supply voltage of 3-28 V and output voltage of 0.5-5 V. IÂ-²C interface can be used to fine adjust output voltage and implement margining, as well as to program all device functions. Providing programmable switching frequency from 250 kHz to 1 MHz, converter incorporates SmartDrive(TM) technology, which minimizes...

Read More »
DC to DC Power Supplies (Converters)

Synchronous Buck Power Supply features programmable LDO.

Supplied in 5 x 5 mm package, SC403 utilizes EcoSpeed(TM) architecture with pseudo-fixed frequency adaptive on-time control and features integrated power MOSFETs, bootstrap switch, and programmable LDO (200 mA). It operates from 3-28 V and offers internal or external bias voltage of 3-5 V. Along with various logic I/O control options, IC incorporates protections for over-voltage and under-voltage...

Read More »
Buck Converter lets application processors run at max clock speed.
DC to DC Power Supplies (Converters)

Buck Converter lets application processors run at max clock speed.

Supplied in 2.0 x 2.0 x 0.65 mm WLP, MAX8952 synchronous DC-DC step-down converter delivers 2.5 A of output current and maintains output-voltage accuracy by integrating bandgap reference and minimizing offset errors in feedback circuit. Fully differential remote sense ensures precise regulation at load by eliminating resistive losses associated with PCB trace impedance. Operating from input as...

Read More »
DC/DC Synchronous Buck Regulator supports SD Flash Memory.
DC to DC Power Supplies (Converters)

DC/DC Synchronous Buck Regulator supports SD Flash Memory.

Model FAN5362 features VIN of 3.6 V and VOUT of 2.9 V, allowing it to deliver peak efficiency of 94% and maintain over 86% efficiency at light load of 1 mA. As battery approaches lower end of range, unit transitions seamlessly into and out of 100% duty cycle operation and is designed to respond with minimal under and overshoot. Measuring 0.96 x 1.31 mm with 0.6 mm profile, 3 MHz, 500 mA regulator...

Read More »
DC-DC Converters feature SIP8 package, 4:1 input,.
DC to DC Power Supplies (Converters)

DC-DC Converters feature SIP8 package, 4:1 input,.

AM3GH-Z series dual output buck DC-DC converters accept 4:1 input ranges of 4.5-18, 9-36, and 18-75 Vdc with I/O isolation of 1,600 Vdc. They deliver output currents of up to 700 mA to regulated single and dual output voltage ranges of 3.3, 5, 12, and 15 V. RoHS compliant with CE marking for EN55022 and EN55024 computer standards, series features continuous short circuit protection, low ripple...

Read More »
Isolated DC-DC Converter delivers 12 V output.
DC to DC Power Supplies (Converters)

Isolated DC-DC Converter delivers 12 V output.

Housed in 2.3 x 1.45 x 0.44 in. open-frame, quarter-brick package, 300 W Model HPQ-12/25-D48 features 2:1 input range of 36-75 V and output current up to 25 A with efficiency up to 94.5%. Users can trim output voltage up or down by ±10% with external trim resistor. Operating within industrial temperature range of -40 to 85°C, RoHS-6 compliant converter offers input-output isolation...

Read More »
Low-Noise DC/DC Regulator operates from 3.6-36 V.
DC to DC Power Supplies (Converters)

Low-Noise DC/DC Regulator operates from 3.6-36 V.

Supplied in 11.25 x 15 x 4.32 mm plastic LGA package, LTM8033 features onboard inductor, DC/DC converter, and supporting circuitry. EMI filter makes IC compliant with EN55022 Class B. Regulated output is offered from 0.8-24 V at up to 3 A, and multiple ICs can be paralleled if more than 3 A is required. Rated up to -55 to +125°C, regulator offers resistor-selectable switching frequency...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers