DC to DC Power Supplies (Converters)

DC to DC Power Supplies (Converters)

Hella Develops Products for Energy Management in Vehicles

PLYMOUTH, Mich. - Hella, a major automotive electronics supplier, is developing two energy-management products to improve the performance of vehicle electric systems - a voltage stabilizer and a DC/DC converter. Hella's voltage stabilizers are critical components for fuel-saving and start-stop engine systems. The stabilizers supply a constant output for voltage-critical loads in systems that...

Read More »
DC to DC Power Supplies (Converters)

Electronica 2010: Murata Debuts Technologies to Shrink Footprint and Increase Functionality and Battery Life of Mobile Devices

Hoofddorp, Netherlands: Murata has debuted three energy efficient technologies aimed at increasing mobile device functionality and reducing size while extending battery life at Electronica 2010 in Munich, Germany. The company has announced a tiny buck converter module to help reduce footprint, a new super-capacitor technology to help provide peak power requirements and a highly integrated...

Read More »
Step-Up DC-DC Converter draws 1 µA quiescent current.
DC to DC Power Supplies (Converters)

Step-Up DC-DC Converter draws 1 µA quiescent current.

Designed to accommodate diverse battery-powered applications, AS1310 hysteretic boost DC-DC converter is optimized for light loads (60 mA) and offers efficiencies up to 92%. It operates from 0.7-3.6 V battery supply and provides output voltages from 1.8-3.3 V. Even at loads as light as 100 Â-µA, efficiency reaches 85%. Features include shutdown mode that draws less than 100 nA, adjustable...

Read More »
Step-Down DC/DC Converter features dual linear controllers.
DC to DC Power Supplies (Converters)

Step-Down DC/DC Converter features dual linear controllers.

Operating from 4-36 V with transient protection to 70 V, Model LT3694 is suited for load dump and cold-crank conditions found in automotive applications. Internal 3.5 A switch delivers up to 2.6 A of continuous output current at voltages as low as 0.75 V. Switching frequency is user-programmable from 250 kHz to 2.5 MHz, and each integrated LDO controller has programmable current limit up to 1 A....

Read More »
Buck-Boost DC/DC Converter features intgrated power MOSFETs.
DC to DC Power Supplies (Converters)

Buck-Boost DC/DC Converter features intgrated power MOSFETs.

With 2.7-15 V input range and 2.5-14 V output, Model LTC3112 delivers 2.5 A of current from wide range of power sources, including batteries, super capacitor stacks, and wall adapters. Unit includes 4 internal N-channel MOSFETs to deliver efficiencies up to 95%. Default switching frequency of 750 kHz can be synchronized to external 300 KHz to 1.5 MHz clock. Providing continuous, jitter-free...

Read More »
Step-Down DC/DC Converter offers transient protection to 60 V.
DC to DC Power Supplies (Converters)

Step-Down DC/DC Converter offers transient protection to 60 V.

Operating from 3-36 V, dual-output Model LT3692 delivers up to 3.5 A of continuous output current from each channel. Monolithic switching regulator provides user-programmable switching frequency from 250 kHz to 2.25 MHz. Independent input, shutdown, feedback, soft-start, current limit, and comparator pins for each channel simplify complex power supply tracking/sequencing requirements. Housed in 5...

Read More »
DC to DC Power Supplies (Converters)

Synchronous PWM Step-Down Converter has 2 A max load current.

Supplied in 8-pin SOIC package, PowerBlox(TM) XRP7664 accommodates operating voltage up to 18 V, is optimized for 12 V input voltage rail, and is equally capable of operating from 5 V rail. Fixed switching frequency is 340 kHz, and max efficiency is rated to 93%. With functionality addressing needs for smaller footprint in A/V equipment, IC offers adjustable output voltage down to 0.925 V,...

Read More »
DC to DC Power Supplies (Converters)

Point of Load DC-DC Power Converter offers high efficiency.

Model DVPL0503S non-isolated, synchronous, buck-regulated converter steps down voltage at point of end use. Military-grade product features 3 A, 10 W power output, adjustable output voltage from 0.8-3.4 V, and operates from 5 V nominal input over operating temperature range of -55 to +125°C. Measuring 0.700 x 0.700 x 0.270 in., it can be used alone or in conjunction with DVHE 50W DC-DC...

Read More »
DC to DC Power Supplies (Converters)

TI Introduces Breakthrough High-density Power Solutions for Point-of-load Design

Fully integrated 600-mA solution measures only 6.7 mmÂ-²; high-performance 6-A, 14.5-V integrated converter achieves 800 W/in3 DALLAS - Texas Instruments Incorporated (TI) (NYSE: TXN) today introduced two new power management integrated circuits for point-of-load designs that raise the bar for size, power density and performance. TI's TPS82671 and TPS84620 integrated power solutions ease...

Read More »
DC-DC Converters feature integrated heat sink.
DC to DC Power Supplies (Converters)

DC-DC Converters feature integrated heat sink.

Measuring 7.8 x 5.0 x 1.5 in., VFK400 Series provides 400 W output power, accepts 4:1 input, and can support either 10-36 or 18-75 Vdc isolated input voltages. Chassis-mount units are available in 3 regulated output voltage versions of 12, 24, and 48 Vdc. Converters provide remote sense and remote on-off control as well as over-temperature, over-current, and input transient voltage protection....

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers