DC/DC Converters are suited for ADSL applications.
Designed to meet DSL line-card application requirements, isolated DC/DC converters provide 5 outputs from nominal -48 V input (-36 to -75 V) and deliver up to 100 W over -40 to +85Ã-
Read More »DC/DC Converter features 2,250 V input-to-output isolation.
With fixed 5:1 conversion ratio, Model EUS34-096 isolated DC/DC converter is designed for powering multiple downstream, non-isolated point-of-load converters in Intermediate Bus Architecture applications. It offers 96% efficiency in 8-brick footprint and features input voltage range of 38-55 Vdc. Measuring 58.4 x 36.8 x 12.2 mm, product delivers maximum of 300 W at 48 Vdc input and minimum of 240...
Read More »DC-DC Converters offer switching frequencies to 1 MHz.
Incorporating Zero-Current and Zero-Voltage Switching topology, mid-power Maxi Modules include 3.3 Vout, 200 W model and 300 W models at 5, 12, 15, 24, 28, 36, and 48 Vout. Converters operate from 24 V nominal input, with input range of 18-36 V and efficiencies up to 88%. Measuring 4.6 x 2.2 x 0.5 in., units come in RoHS-compliant models and are suited for industrial or process control,...
Read More »High-Speed DC/DC Controller meets ADSL2+ power requirements.
Supplied in 3 x 3 mm QFN16 package, synchronous SP6138 operates above max 2.2 MHz ADSL2+ frequency to avoid data interference without additional filtering components. It generates min on-times under 30 ns, allowing for direct conversion at 2.5 MHz from 15 V to modem DSP core and I/O voltages. Designed to power ADSL2+ and full ADSL2 SRA (Seamless Rate Adaptation) modems, product features loss-less...
Read More »Hidden Supply Chain Risks in Chinese Procurement
To learn more about strategies you can use to avoid hidden risks commonly associated with Chinese supply-chains, download now.
Read More »Dual Channel DC/DC Converter delivers 1.6 A per channel.
Supplied in 16-lead, 5 x 4 mm DFN package, LT3506 and LT3506A dual current mode PWM step-down DC/DC converters operate from 3.6-25 V input and feature two 2 A power switches. Each channel offers independent shutdown and soft-start pins. While LT3506 switches at 575 kHz, LT3506A switches at 1.1 MHz. Both have soft-start, internal cycle-by-cycle current limit, and low VCESAT (210 mV @ 1 A) internal...
Read More »DC-DC Converters range from 1.5 to 25 W.
Designed for process control and communications equipment, CC-E Series comprises 68 models with power ratings of 1.5, 3, 6, 10, 15, and 25 W. Units with power rating of 10 W or less can be supplied with choice of 5, 12, 24, and 48 V nominal input and output voltages of 3.3, 5, 12, 15, Ã-
Read More »Synchronous Buck Switching Controller powers loads to 10 A.
Suited for space-constrained designs, LM3743 voltage-mode PWM buck controller operates over 3-5.5 V range and drives external synchronous MOSFETs at 300 kHz or 1 MHz. It generates output voltages as low as 0.8 V and features externally programmable soft start with tracking capability and external compensation. Additional protection features include under-voltage lockout and fixed short-circuit,...
Read More »DC/DC Converter offers output disconnect and soft-start.
Model LTC3526 1 MHz current mode, synchronous boost dc/dc converter has internal 500 mA switches that deliver 5 V output from 0.85-4.4 V input, making it suitable for Li-Ion/Polymer or single/multicell alkaline/NiMH applications. Available in 2 x 2 x 0.75 mm DFN package, LTC3526 delivers up to 100 mA of continuous current at 3.3 V from single alkaline cell. Synchronous rectification enables...
Read More »DC/DC Converters suit defense and avionics applications.
Available in 5, 15, and 35 W ratings, MTC series converters meet MIL-STD 810F specification for temperature, shock, vibration, bump, altitude, and salt fog. They have input range of 15.5-40 V and can operate through transients of 10 V for 10 sec and up to 50 V for 1 sec and are suitable for systems with 28 V input. Converters minimize external circuitry and include inhibit line, output voltage...
Read More »Boost Converter offers dynamic output voltage programming.
Targeting OLED, LCD, and CCD applications, Model AAT1232 is 24 V, 100 mA boost converter for portable products powered by single-cell Lithium-ion batteries. It operates at switching frequency up to 2 MHz and maintains 80% efficiency across load currents down to 1 mA. Available in Pb-free 16-pin, 3 x 4 mm TDFN package or Pb-free 12-pin TSOPJW package, device is specified over -40 to +85Ã-
Read More »Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics
Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.
Read More »