DC to DC Power Supplies (Converters)

Quarter Brick DC/DC Converters feature 4:1 input range.
DC to DC Power Supplies (Converters)

Quarter Brick DC/DC Converters feature 4:1 input range.

Suiting industrial, medical, and telecom applications, UQQ family of converters supply 100 W of power. Offered in pin-compatible package measuring 2.22 x 1.46 x 0.43 in., converters install on PC boards with Â-½ in. card spacing. Input ranges are 9-36 Vdc, 12 V and/or 24 VIN nominal, and 18-75 Vdc, 24 V and/or 48 VIN nominal. Available models include 3.3 V/25 A, 5 V/20 A, 12 V/8 A, 15 V/7 A,...

Read More »
DC/DC Regulator features 2.3 mm profile.
DC to DC Power Supplies (Converters)

DC/DC Regulator features 2.3 mm profile.

Weighing 0.86 g, LTM4604 uModule(TM) regulator includes onboard controller, power switches, inductor, and bypass capacitors enclosed and protected in 9 x 15 mm LGA package. It operates from input supply range of 2.35-5.5 V, regulates an output voltage from 0.8-5 V, and achieves 93% efficiency when converting 3.3 V input to 2.5 V output at up to 4 A. Rated for operation from -40 to +85Â-

Read More »
DC/DC Converter delivers up to 1.8 A continuous current.
DC to DC Power Supplies (Converters)

DC/DC Converter delivers up to 1.8 A continuous current.

Using constant frequency and current mode architecture, 4 MHz Model LTC3568 operates from input voltage of 2.5-5.5 V, making it suited for Li-Ion/Polymer battery inputs as well as 3.3 or 5 V inputs for point-of-load applications. Internal switches with RDS(ON) of 0.11 W enable efficiencies up to 96%. Housed in 3 x 3 mm DFN package, synchronous buck regulator uses Burst ModeÂ-® operation to...

Read More »
Power Converters are made with RoHS compliant materials.
DC to DC Power Supplies (Converters)

Power Converters are made with RoHS compliant materials.

Series AMPL-UZ 10A and AMPL-UZ 16A non-isolated point-of-load converters offer efficiency rates up to 97%. Targeted to meet Intermediate Bus Architecture (IBA) applications requirements, both Series handle 5 V and 12 V input bus needs and have programmable output ranges of 0.75-5.0 V. Featuring no minimum load operation, remote output sense, and industry standard SMD footprint of 1.3 x 0.53 x...

Read More »
DC/DC Converter features dual-channel design.
DC to DC Power Supplies (Converters)

DC/DC Converter features dual-channel design.

Housed in 3 x 3 mm QFN package, 1 MHz Model LTC3522 features input voltage of 2.4-5.5 V. One channel utilizes synchronous buck-boost topology that delivers up to 400 mA continuous output current with inputs above, equal, or below output. Second channel consists of synchronous buck regulator, which delivers up to 200 mA continuous output current to voltages as low as 0.6 V. Combination is suited...

Read More »
Boost Converter drives up to 6 white LEDs and OLED display.
DC to DC Power Supplies (Converters)

Boost Converter drives up to 6 white LEDs and OLED display.

Combining 2.3 MHz PWM LED driver and low-noise OLED driver, dual-channel Model LT3498 is housed in 2 x 3 mm DFN package with internal power switch and Schottky diode for each channel. Input voltage range of 2.5-12 V enables it to operate from single cell Li-Ion batteries up to fixed 12 V input rails, delivering outputs up to 32 V. From single cell Li-Ion input, LED driver channel can drive up to...

Read More »
DC to DC Power Supplies (Converters)

Power Management IC aids in design of portable electronics.

Housed in 4 x 5 mm package, LTC3555 USB Power Manager and Triple Step-Down DC/DC Converter incorporates range of power management functions, including switching PowerPath(TM) manager, stand-alone battery charger, 3 monolithic buck regulators, and always-on LDO, controlled via I2C interface. PowerPath control manages power flow between AC/DC wall adapter, USB port, Li-Ion/Polymer battery, and...

Read More »
DC to DC Power Supplies (Converters)

DC-DC Converters suit railway and transportation systems.

Offering 8 output voltages (3.3, 5, 12, 15, 24, 28, 36, and 48 V) with 3 package sizes (Â-¼ brick, Â-½ brick, and full brick), 110 Vdc input series of 24 models of Maxi, Mini, and Micro converters provide 50-400 W output power. They feature 66-154 V input range in accordance with EN50155, encapsulated circuitry for shock and vibration, and extended temperature ranges. Maxi modules measure...

Read More »
DC to DC Power Supplies (Converters)

Boost LED Driver targets portable applications.

Housed in 3 x 3 mm MLFÂ-® package, 7 W Model MIC2298 offers switch current of 3.5 A, allowing device to deliver 1 A into 2 high-brightness WLEDs connected in series. Brightness can be controlled by applying voltage or PWM signal to brightness pin. Featuring input voltage of 2.5-10 V, DC-DC converter IC operates at fixed 1 MHz switching frequency with greater than 86% efficiency. Device is...

Read More »

All Topics