DC to DC Power Supplies (Converters)

DC/DC Converters feature high-voltage isolation.
DC to DC Power Supplies (Converters)

DC/DC Converters feature high-voltage isolation.

With efficiencies up to 82%, V3 Series 2 W converters are supplied in subminiature SIP and DIP packages with isolation voltages or 1,000 or 3,000 Vdc. Input voltages include 5, 12, 24, and 48 Vdc, while single-output voltages range from 3.3-24 Vdc. All isolated outputs are regulated, and no heat sinks are required. Operating temperature range is -40 to +85 °C. SIP package size is 0.76 x...

Read More »
Point-of-Load Converter provides all-in-one power solution.
DC to DC Power Supplies (Converters)

Point-of-Load Converter provides all-in-one power solution.

Dual-output, non-isolated, point-of-load (POL) converter for DDR (double data rate) memory, DDR12, enables 2.5 V VDDQ supply for DDR logic and 1.25 V DDR termination voltage (VTT) to be derived from single module. Unit employs synchronous rectification techniques and has 85% conversion efficiency when operated at half-load or greater. The 2.5 V VDDQ output delivers up to 25 A, and 1.25 V VTT...

Read More »
DC-DC Converters feature miniature DIP package.
DC to DC Power Supplies (Converters)

DC-DC Converters feature miniature DIP package.

Fully encapsulated Series SB05 provides output power of 5 W. Converters accept single-range and 2:1 wide range inputs from 9-75 Vdc, and provide single and dual outputs from 3.3-24 Vdc. All contain short circuit protection, internal input filter, and 1600 V input-to-output isolation. They operate over temperature range of -25 to +71°C without forced cooling or output power derating.

Read More »
Isolated DC-DC Converters suit rack-mounted applications.
DC to DC Power Supplies (Converters)

Isolated DC-DC Converters suit rack-mounted applications.

Series NTH 2 W, dual output, surface mount converters are 5.5 mm high with mounting footprint of 0.49 inÂ-². Input voltages of either 5 or 12 V and dual isolated options of 5, 9, 12, or 15 V are available. Isolation between input and output is 1 kVdc. Converters operate with efficiencies up to 84% and have total power density of 25.67 W/in³. Operating temperature is -40 to...

Read More »
DC-DC Converter provides 88% efficiency.
DC to DC Power Supplies (Converters)

DC-DC Converter provides 88% efficiency.

Dual-output, quarter-brick Series ALQ15 offers output voltages of 3.3/2.5, 3.3/1.8, and 2.5/1.5 V. Rated to deliver up to 15 A from either output, series provides a full 60 W of clean, regulated, low-noise DC power. Unit can start up into high-capacitance loads of up to 10,000 microFarads per output. Features include over-temperature, over-current, and over-voltage protection. Input voltage range...

Read More »
Converters provide 95% efficiency.
DC to DC Power Supplies (Converters)

Converters provide 95% efficiency.

Non-isolated, point-of-load (POL), 10 A DC/DC Series SIL10, for use with 3.3 and 5.0 V on-board bus levels, employs synchronous-buck topology, using fixed-frequency switching and low on-resistance MOSFETs. Power density is 107 W/in3. Fixed-output converter provides 8 voltages from 0.8 to 3.3 V, and accommodates input voltage of 3.0 to 5.5 V. Wide-output trim model requires 4.5 to 5.5 V input....

Read More »
Converter offers low profile with standard pin out.
DC to DC Power Supplies (Converters)

Converter offers low profile with standard pin out.

PowerQor® Mega series eighth-brick sized isolated dc/dc converter delivers up to 15 A total output current at 3.3 V and below and 50 W at 5 V and above, without heatsink. The EML series has 48 V nominal input (35-75 V range) and meets input voltage transient requirements up to 100 V for 100 msec. Unit measures 0.9 x 2.3 x 0.37 in., occupies 60% of board space of standard quarter-brick, and...

Read More »
DC-DC Converter extends battery life in portable applications.
DC to DC Power Supplies (Converters)

DC-DC Converter extends battery life in portable applications.

Inductorless, 100 mA FAN5660 converter achieves over 90% efficiency at full load with typical operating current of 120 Â-µA. It inverts +l.5 V to +5.5 V input to corresponding -l.5 V to -5.5 V output. Unit can also split or double full load, +5.0V input voltage, of power supply or battery, providing +2.25 V in splitter mode and +9.5 V in doubler mode. Equipped with onboard oscillator...

Read More »
DC/DC Converters require no external components.
DC to DC Power Supplies (Converters)

DC/DC Converters require no external components.

PTK6700 Series non-isolated 13 A DC/DC VRMS provide up to 45 W of output power. Units can accept inputs of 3.3, 5, or 12 Vdc and provide single or dual outputs that are 5-bit digitally programmable from 1.1 to 3.5 Vdc. They utilize on-board heat exchanger technology, have operating efficiencies of 92% and operate over ambient temperature range of -40 to +70°C without forced-air cooling or...

Read More »
DC/DC Converters suit computer workstations and PCs.
DC to DC Power Supplies (Converters)

DC/DC Converters suit computer workstations and PCs.

Single-output, non-isolated, point-of-load (POL) converters employ open-frame single-board construction and fixed-frequency switching technology. All converters offer adjustable output and are suited for through-hole board mounting. SIL06 converters handle output currents up to 6A, with input voltages of 5 and 12 Vdc; SIL15 units handle output currents to 15A with input voltages of 5 and 12 Vdc,...

Read More »

All Topics