DC to DC Power Supplies (Converters)

DC/DC Converter provides more than 90% efficiency.
DC to DC Power Supplies (Converters)

DC/DC Converter provides more than 90% efficiency.

SWIFT(TM) TPS54010 step-down, continuous-output, 14 A converter features 2 peak 18 A FETs integrated onto single chip and provides 1% output voltage accuracy down to 0.9 V. Switching frequency is fixed over entire output current range, and can be adjusted up to 700 kHz. Synchronous unit features input range of 3-4 V, adjustable soft start, plus power good output and enable pin for sequencing....

Read More »
Non-Isolated DC/DC Converters offer efficiencies to 92%.
DC to DC Power Supplies (Converters)

Non-Isolated DC/DC Converters offer efficiencies to 92%.

Operating over -40 to +85°C temperature range, APA18 series delivers 18 A with adjustable output voltages from 0.75-5.5 V. It incorporates built-in overcurrent and overtemperature protection as well as remote enable pin for sequential activation. Measuring 2 x 0.5 x 0.4 in., 75 W, single inline package footprint point-of-load DC/DC converter is available with input voltage from 10-14 V and...

Read More »
Power Conversion IC comes in 2 x 1 mm package.
DC to DC Power Supplies (Converters)

Power Conversion IC comes in 2 x 1 mm package.

Operating at 3 MHz fixed frequency, TPS62300 step-down, 500 mA dc/dc converter extends battery life in space-constrained applications. Synchronous, switch-mode, power management IC with integrated FETs delivers 93% power conversion efficiency and -0.5 to 1.3% voltage regulation accuracy. Series TPS6107x synchronous switch, 600 mA, dc/dc boost converters support input voltages of 0.9-5.5 V and...

Read More »
DC/DC Converter features 15 x 15 mm power LED driver.
DC to DC Power Supplies (Converters)

DC/DC Converter features 15 x 15 mm power LED driver.

Requiring no external components, FX5959G701ADJ features fully integrated constant current source module that ensures full load life of LEDs without exceeding applicable LED voltage. It drives power LEDs rated for operation at or above 300 mA by being connected with LED and low voltage source. Measuring 0.59 x 0.59 x 0.126 in., product incorporates 20 components and dc/dc converter in one BGA...

Read More »
DC/DC Converters offer output to 2,000 Vdc.
DC to DC Power Supplies (Converters)

DC/DC Converters offer output to 2,000 Vdc.

PCB-mount, high-voltage converter series VMHV, VSHV, VPHV, and VBYH come in 22 models with expected MTBF value of 400,000 hr. They accept input of 5 or 12 V, with wattages from 0.5-3.5 W. Output voltages are trimmable from 0-2,000 Vdc with external pot, and voltage regulation is as low as .01%. Available in positive and negative polarities, converters feature remote on/off and short circuit,...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converters come in compact SIP package.

With single-in-line footprint, APC-PD6NG and APC-PD10NG series isolated type dc-dc converters features continuous auto restart short-circuit protection, 1,000 Vdc I/O isolation, and 80% typ efficiency. They provide regulated 1 and 2 W output power in SIP8 package that measures 0.86 x 0.36 x 0.44 in., and can be supplied in 4 input voltage ranges of 4.5-9 V, 9-18 V, 18-36 V, and 36-72 V. Standard...

Read More »
Compact DC/DC Converter suits medical applications.
DC to DC Power Supplies (Converters)

Compact DC/DC Converter suits medical applications.

With 3 kV isolation, VAD series converters measure 1.25 x 0.8 x 0.4 in. and feature 24 pin dip pinout. They operate with efficiencies up to 82% and are available in single- and dual-output versions with 2:1 or 4:1 input ranges. Rated 3-7.5 W in 3.3-15 V single output models and ±5 to ±15 V dual-output models, all products offer trimmable output voltage via external resistor. Features...

Read More »
DC/DC Converter suits space-constrained applications.
DC to DC Power Supplies (Converters)

DC/DC Converter suits space-constrained applications.

Model LT1935 is a 2 A, 40 V step-up converter in ThinSOT(TM) package. Input voltage of 2.3-16 V enables unit to operate from single-cell, Li-Ion batteries up to fixed 15 V input rails, delivering outputs up to 38 V. NPN switch achieves VCESAT of 180 mV at 2 A, independent of supply voltage. Constant 1.2 MHz switching frequency allows designers to keep switching noise out of noise-sensitive...

Read More »
Power Converter suits photovoltaic applications.
DC to DC Power Supplies (Converters)

Power Converter suits photovoltaic applications.

Ecostar(TM) 30 kW grid-tie utility, interactive converter offers 97% peak efficiency, transformer efficiency of 97.5%, and standby tare losses of 25 W. Unit automatically disconnects power transformer from grid when there is no power from PV array, eliminating night-time transformer losses. Detailed text messages give system warnings and faults, while diagnostics and logic ensure that nuisance...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers