DC/DC Converters accept wide range of dc inputs.
WD Series 10W dual output dc/dc converters have 4:1 dc input range to accommodate 12 V battery, 24Vdc industrial, and 48V telecom power sources. 3 models have input range from 9-36 Vdc, and 3 models have 18-72 Vdc input range. Outputs are ±5, ±12 and ±15 Vdc. All models are fully isolated input to output, have 5-sided shielded case, and offer optional on/off function to conserve...
Read More »
DC/DC Converter works in low power applications.
QML series isolated dc/dc converter can deliver up to 15 A total output current at 3.3V and below and up to 75W at 5V and above without need for attached heatsink. It uses synchronous rectification, resulting in no derating of output power up to 70 degrees C. Converter employs industry standard quarter-brick footprint and pin out, measures 1.45 x 2.3 in., and has low profile of 8.5mm. Functions...
Read More »
DC-to-DC Conversion Board suits PC/104-based computers.
Power Vx 90-watt power conversion board is designed with intelligent power management features. It offers greater than 90% efficiency, input voltage range of 9-60 V, 12-bit external input voltage monitoring, local temperature monitoring and reverse polarity protection on input. Manufactured in compliance with PC/104 form factor requirements, Power Vx supports +/-5 Vdc and +/-12 Vdc, and is...
Read More »DC/DC Converters contain internal PI filters.
ASD15H series open frame, isolated, 15W DC/DC converters are fully approved for EN60950 and UL1950 SELV safety standards. Series consists of 21 models with 4:1 Input Ranges of 9-36 and 18-75 VDC and single and dual outputs from 3.3 to 15 VDC. ASD15H converters have integral finned heat sink that permits operation in temperatures from -25° to 71° C without additional cooling or...
Read More »
How to Choose the Right Vacuum Chamber
To learn more about avoiding the pitfalls in choosing a vacuum chamber manufacturer and KTC's expertise in this area, download this white paper now.
Read More »
DC-DC Converters offer wide temperature operation.
Single-output, surface-mount NTE Converters are 1W devices that operate across industrial temperature range (-40 to 85°C) without external cooling. They feature 3V input and single, isolated output of 3.3 or 5V. Units have input-to-output isolation of lkVDC and are based on SMD construction that incorporates multi-layer capacitors and toroidal magnetics. Converters are packaged in UL 94V-0...
Read More »
DC/DC Converters deliver output currents of 80 A.
Half-brick DC/DC converters are available in two versions: ALH80 open face and AEH80 with heat sink adapter plate attached. Both offer efficiencies of 87% while delivering 80A, and 88.5% at 60A. Input range is 36 to 75V, and output voltages are 1.2, 1.5, and 1.8 volts. Units feature ±10% output voltage trim adjustment capability; under voltage lockout with hysteresis; and over temperature,...
Read More »
DC/DC Converter features dual outputs of 3.3 and 5 volts.
VSX60 60W converter includes power trading facility that enables full 60W to be provided from either output. Unit is available in 2 versions with input voltage ranges of 18-36V or 36-75V. Input-to-output isolation is specified as 1500 VDC. VSX60 features input filtering, remote on/off with positive or negative logic, and non-latching protection against undervoltage, overvoltage, short-circuit,...
Read More »
DC-DC Converters provide extended temperature operation.
IC-Style DC-DC Converters are 3.3 V-input surface mount devices with footprints of 1.64 cm2 and dual isolated outputs of either 12 or 15 V. They are fully compliant with CECCO0802 standard for reflow soldering at 280°C. Each device combines multi-layer ceramic capacitors with internal SMD construction. Converters feature l kVdc isolation between input and output. Load regulation is...
Read More »
DC/DC Converter provides 10 A output in small package.
Single output UHE Series isolated dc/dc converter delivers as much IOUT (10 A) as company's half/quarter-bricks and standard 2 x 2 in. modules. High efficiency eliminates need for heat-sinking aluminum baseplates common to most bricks. It comes in plastic package measuring 1.6 x 2 x 0.4 in. Options include 22 models with VOUTs from 1.2 to 15 V, IOUTs from 2 to 10 A, and VINs from 10 to 75 V. Free...
Read More »
TPA Motion Introduces Industry's First Compact Robotic Positioner for Medical Devices
TPA Motion's microplate handling robots are designed specifically for medical instruments and lab automation devices. Check out the video to learn more.
Read More »
