DC to DC Power Supplies (Converters)

DC/DC Boost Converter can operate from single solar cell.
DC to DC Power Supplies (Converters)

DC/DC Boost Converter can operate from single solar cell.

Supplied in 3 x 3 mm, 10-pin QFN package, TPS61200 enables portable electronic end-equipment to draw power from solar energy and micro-fuel cells. Step-up converter, with integrated 1.5 A switch, supports input voltages from 0.3-5.5 V during normal operation and can also manage power down to 0.0 V. Solution provides 0.5 V start-up capability in any load condition and can operate with over 90%...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converter features open-frame, isolated design.

Converting 24 Vdc input to ATX output, 150 W Model MPD-815H features U-channel chassis for efficient heat conduction and reduction of dust into system. It operates over 18-36 Vdc input range and from 0-50°C without performance derating. Designed to fit within 1U height constraints, RoHS-compliant device provides short circuit, over voltage, and thermal protection. It is suitable for variety...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converters come in miniature package.

Measuring 2.28 x 2.2 x 0.5 in., 300 Vin Mini DC-DC converters incorporate low-noise Zero-Current and Zero-Voltage Switching technology and offer efficiencies up to 89%. Products, optionally available in RoHS-compliant models, are available in 5 environmental grades with 6 pin options and 3 baseplate options. Specific models include 100 W models at 2 and 3.3 Vout, and 150 W models at 5, 12, 15,...

Read More »
DC to DC Power Supplies (Converters)

DC/DC Converters offer 4:1 input range.

Featuring 1 x 2 x 0.4 in. footprint, 20 W Series TEN20WIN consists of 14 models offering 9-36 Vdc or 18-75 Vdc input ranges and single or dual outputs ranging from 3.3-15 Vdc. Efficiencies up to 86% enable extended operating temperature of -40 to +85°C. Housed in low-profile, shielded metal package, RoHS-compliant converters include short circuit protection, EN55022 Class A input filter,...

Read More »
Isolated DC/DC Converters include load regulation.
DC to DC Power Supplies (Converters)

Isolated DC/DC Converters include load regulation.

Housed in ultra-miniature encapsulated package measuring 0.5 x 0.5 x 0.4 in., BPS Series features single input voltage configurable from 3-12 Vdc and single output voltage configurable from 50-220 Vdc. Units operate from -55 to +85° with no heat sink or electrical derating. Available in through-hole and SMT versions, 1.5 W converters are suited for powering PIN diodes and APDs in RF...

Read More »
DC-DC Converter features programmable frequency up to 2 MHz.
DC to DC Power Supplies (Converters)

DC-DC Converter features programmable frequency up to 2 MHz.

LTC3533 synchronous buck-boost converter delivers up to 2 A output current from Li-Ion/Polymer sources or 800 mA from dual cell alkaline/NiCad/NiMH sources. Its .8-5.5V input range and 1.8-5.25 V output range provide regulated output with inputs above, below, or equal to output. Programmable Burst Mode® operation allows programming of load current, and device includes 2 N-Channel and 2...

Read More »
DC/DC Converters provide efficiencies from 76-85%.
DC to DC Power Supplies (Converters)

DC/DC Converters provide efficiencies from 76-85%.

Housed in 1.31 x 0.81 x 0.40 in. encapsulated package, 5 W surface mount TES-5 Series includes 21 models offering input ranges of 9-18, 18-36, and 36-75 Vdc with single and dual outputs from 3.3-15 Vdc. Standard features include 1,500 Vdc I/O isolation, short circuit protection, and remote on/off control. RoHS-compliant converters operate from -40 to +85°C and are suited for battery powered...

Read More »
DC-DC Converter features 3.2 A internal switch.
DC to DC Power Supplies (Converters)

DC-DC Converter features 3.2 A internal switch.

Operating within VIN range of 3.6-34 V, step-down Model LT3684 is suitable for load dump and cold-crank conditions found in automotive applications. Its 3.2 A internal switch can deliver up to 2 A of continuous output current at voltages as low as 1.265 V. Switching frequency is user programmable from 300 kHz to 2.8 MHz. Housed in 3 x 3 mm, DFN-10 package, regulator includes integrated boost...

Read More »
DC to DC Power Supplies (Converters)

Boost Regulator suits white LED backlighting applications.

Designed with single-wire digital interface for brightness control and enable function, MIC3289 comes in TSOT-23-6 or 2 x 2 mm MLF® 8L package and features internal Schottky Diode and 16 logarithmic dimming steps. This 1.2 MHz PWM White LED driver requires 4 external components to provide complete solution and is protected with OVP circuit. Full operating input voltage range, 2.5-6.5 V,...

Read More »
DC-DC Converters drive high current LEDs.
DC to DC Power Supplies (Converters)

DC-DC Converters drive high current LEDs.

Models LT3478 and LT3478-1 are 40 V, 4.5 A converters that can drive up to six 700 mA LEDs in series from 12 V input. Model LT3478-1 uses internal current sense resistor, limiting output current to 1 A, whereas Model LT3478 uses external sense resistor to extend max LED current to 4.5 A. True Color PWM(TM) dimming delivers constant LED color with dimming ranges up to 3,000:1. Housed in thermally...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers