Wire Connector is offered in 6-position configuration.
Electrical Connectors

Wire Connector is offered in 6-position configuration.

BUCHANAN vertical screwless wire connector, spaced on 3.5mm staggered centerlines, may be used with 18 AWG solid or tinned stranded wire for poke in termination. Contacts carry 2A/600 VAC current rating. Connector features kinked contact legs to provide PCB retention before and during wave solder, and individual wire retention is rated at 5 lbs. Housing is molded from UL94 VO rated PBT with...

Read More »
Connectors are available in threaded mate or snap-on.
Electrical Connectors

Connectors are available in threaded mate or snap-on.

SMB/SMC Series Subminiature Coaxial Connectors are machined from brass, gold plated to resist corrosion, and have beryllium-copper female contacts and Teflon® insulators. Providing service life of 500 matings, 50 Ohm connectors are rated for 750 Vrms dielecric withstanding voltage and operating temperature from -65°C to +165°C. Frequency range is 0 to 4 GHz for SMB Series and 0...

Read More »
Electrical Connectors

Card Connector supports 10 Gbyte Ethernet standard.

70-pin pcb-mounted edge card connector supports 10 Gbyte family of Z-axis pluggable transceivers. It offers alignment posts for stable placement on pcb and standoffs for pcb post-solder cleaning. SMT design provides option for connector placement on either side of pcb. Connector will support all of transceiver variants noted in MSAs (850 Nm serial, 1310 Nm serial, 1310 WWDM and 1550 serial...

Read More »
Shielded Connector minimizes electrical interference.
Connectors

Shielded Connector minimizes electrical interference.

Micro-Link connector has 360° aluminum mylar foil shield to minimize electrical interference that can disrupt signal from connector to control device. Gold-plated contacts provide long life, improved conductivity, and corrosion resistance. Rated NEMA 6P and IP 68, connectors can be used for quick disconnect of proximity sensors, photoelectric sensors and switches, hydraulic and pneumatic...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Stacked D-SUB has three mounting options.
Electrical Connectors

Stacked D-SUB has three mounting options.

PC99-colored D-SUB with plastic bracket is used with motherboards using ATX or Micro ATX configurations. It is available with parallel port atop two serial ports or one serial port and one VGA connector. It is also available with parallel port atop single serial port, which can be either left or right aligned. D-SUB is made of UL 94V-0 rated PBT thermoplastic; contact material is phosphor bronze...

Read More »
Circular Plastic Connectors accommodate 24-30 AWG wire.
Electrical Connectors

Circular Plastic Connectors accommodate 24-30 AWG wire.

Micro CPC connectors accommodate 2 to 7 contact positions for wire-to-wire, wire-to-board or wire-to-panel installations. Design incorporates a high reliability contact system suitable for use in industrial and instrumentation applications. Spring probe contact technology provides redundant internal current paths when exposed to vibration, motion and mechanical shock. It typically provides up to...

Read More »
Connectors allow for off-axis insertion.
Connectors

Connectors allow for off-axis insertion.

P-lok® connectors with integrated RADSOCK® socket technology provide positive-locking, spring-loaded coupling. 8 AWG P-lok contacts handle currents up to 69 A while size 4 AWG handle up to 120 A. Features include hyperbolic stamped grid configurations and Push-Pull systems. Thermal rise data after 500 cycles of durability is as follows: Size 8 AWG socket has 38°C at 46 A; Size 4...

Read More »
Push-On Coax Connector terminates cable.
Electrical Connectors

Push-On Coax Connector terminates cable.

Designed for commercial and residential applications, EZ Twist requires no tools or crimping. To terminate, twist connector onto cable for secure connection. Device eliminates screw-on connections to outlets by pushing connector onto outlet to lock in place and pulling to remove. Straight push-to-lock method is used in high-density installations like home cabling enclosures, where space for...

Read More »
Power Supply Connectors are DeviceNet compliant.
Electrical Connectors

Power Supply Connectors are DeviceNet compliant.

HR31 Series power supply connectors are offered in 5 positions and in 5.08 mm pitch. Through-hole type headers are available in both straight and right-angle versions and contacts are available with solder or gold plating. Low height of 10.2 mm allows for high-density mounting. Connectors are supplied with 2 forms of locking: snap-lock, and permanently attached self-aligning screws (on plug) and...

Read More »

All Topics